rear camber on honda...

[Black4DrEK]

hey guys i know there is a way to fix rear camber without a KIT. Using Longer bolts and washers i think.. CAN ANYONE tell me how to REALLY do it.. i need it done asap,, THANKS:goodjob:

[green91]

Using a washer or two behind the upper control arm bracket where it bolts onto the body.

[wannab20hatch]

like chris said use washers and longer bolts. just bring the bolt to home depot and tell them you need a longer one and a few thick washers. less than 10 bucks and your set.

[Barefoot]

normally on average i have to us 3 washers. it gives u a starting point but still would have it checked after u do it.

[Black4DrEK]

:goodjob: thanks guys for all the help...

[dumpdaccord]

i did this on my accord and it worked perfect but can it be done on a 92-95 civic?

ive heard yes and no?

[wannab20hatch]

it can be done on any civic. did it on my 96 dx and one of my 91 hatch's

[twinj]

I could care less about my rear camber.

[wannab20hatch]

I could care less about my rear camber.

or front lol. all of my hatch's were dumped sooner or later.

[dumpdaccord]

I could care less about my rear camber.
baller



i wish i could say the same but tires are expensive......

[j0nbunklah0m]

is there any tricks to doing the front ??

[twinj]

baller



i wish i could say the same but tires are expensive......

My back didn't wear that much, it was the front ones that wore. I had a camber kit on the front.I was always honda have a neg camber in the back from the factory. Plus I didn't think there was enough weight to make a difference.

[edgarda91]

can tha same work for acura integra 91

[wannab20hatch]

for the front spend the money and get a skunk2 upper control arm kit. and yes the same trick works on the teggies also.

[dumpdaccord]

ill be tryin this trick along w/ the camber arms in the front.....hope it works since my current drop is already chewing off the raggedy tires on my steelies....

[Barefoot]

is there any tricks to doing the front ??nope get u a camber kit for it.

[B_Hoov]

I could care less about my rear camber.
x2, dont get cheap bolts either!

[B_Hoov]

is there any tricks to doing the front ??


either the ball joint camber kits or S2 makes some nice upper control arms. actually running them on my hatch