PDA

View Full Version : Need help w/ CVaxel today will buy beer or dinner. HELP!!!


Grnblur
06-22-2008, 03:23 PM
My pass cv axel has popped out and I cant get it back in. I have never messed with cv axels before but im kinda mechanically inclined but I still cant get it back in. I have to have the car to go to work tomorow. Please let me know if you can help Im in gwinnett ill buy ya a case of beer or dinner if you can help me or give ya some gas money. thanks and my number is 770 601 7025.
Tech5
06-22-2008, 03:30 PM
best of luck contact a shop in the a.m in they could do it , there are few shops that are on IA that can do it, in that area...Good luck
Grnblur
06-22-2008, 03:37 PM
I have to be at work at 5:30 in the am I guess im out of luck unless it will pop in for me.
1SOL2NV
06-22-2008, 04:56 PM
i would help but im in augusta .... someone help this guy out .
Grnblur
06-22-2008, 05:07 PM
some updates I tried everything I know and have been told to do and no luck so I decided to put it back together and park it out of the way for the night. I got it together and backed up a little bit and it crunched a bit. I put it in first and pulled forward and it crunched a few times and then nothing no pull at all I treid all gears and nothing so I guess that both axles are pulled out of the tranny and I have no clue what to do except call a repair shop if anybody has any Idea what my problem is or what causes the axles to pull out lmk please...

thanks for all the help sofar also.
The BUCKY
06-22-2008, 05:15 PM
where in gwinnett
Grnblur
06-22-2008, 05:22 PM
Dacula just off 316 past harbins a lil bit
KevinT707
06-22-2008, 05:30 PM
That has happened to me before when my passenger side axle came out just a little; made my car not able to move at all. Happened at the track, pushing it made a crunch & it made the car move again blah blah .. same scenario as yours.

Anyway, I just took the axle out and put it back in making sure it was pushed in ALL the way by pushing the outer into the inner repeatedly, put everything back together & magic.
The BUCKY
06-22-2008, 05:32 PM
Dacula just off 316 past harbins a lil bit


do you have the tools to pull the ball joints?
The BUCKY
06-22-2008, 05:33 PM
just call me 678 677 0969
AnTi-PooN
06-22-2008, 10:57 PM
awww