update pics!!!

[sakasaku]

This is were i work on my car now:(:no::cry:its so :gay:
http://i268.photobucket.com/albums/jj20/sakasaku/Picture094.jpg
BEfore
http://i268.photobucket.com/albums/jj20/sakasaku/Picture005-2.jpg
i got almost all of the interior in!!
http://i268.photobucket.com/albums/jj20/sakasaku/Picture096.jpg
New S1 cable trans/ can ay one tell me how much to cut the down linkage?
http://i268.photobucket.com/albums/jj20/sakasaku/Picture112.jpg
B16 flywheel(thanx to bigdare:goodjob: and my name isnt lame?!!!) needs to be resurfaced i no but it was free!!!!
http://i268.photobucket.com/albums/jj20/sakasaku/Picture111.jpg
Da knuckle(thanx to Bigdare)
http://i268.photobucket.com/albums/jj20/sakasaku/Picture113.jpg

[jfrolang]

My thoughts:

-Those don't look like Integra knuckles to me.

-Assuming your shift linkages are from a DA, you shorten the change rod 2 5/8 inches, and shorten the compensator rod 2 3/8 inches.

-JDM_DUCK is completely lame. Almost as lame as having a stuffed duck on your pillow that you cuddle (spoon?) with.

-Where is spelled with an H. Were is a plural form of was.

-Your signature should say Formerly, not Formally, unless sakasaku is the name you use in court and stuff.

-I expect that you'll lighten that flywheel when you have a machine shop resurface it.

-I hope you're going to do something with that seat.

[sakasaku]

My thoughts:

-Those don't look like Integra knuckles to me.

-Assuming your shift linkages are from a DA, you shorten the change rod 2 5/8 inches, and shorten the compensator rod 2 3/8 inches.

-JDM_DUCK is completely lame. Almost as lame as having a stuffed duck on your pillow that you cuddle (spoon?) with.

-Where is spelled with an H. Were is a plural form of was.

-Your signature should say Formerly, not Formally, unless sakasaku is the name you use in court and stuff.

-I expect that you'll lighten that flywheel when you have a machine shop resurface it.

-I hope you're going to do something with that seat.


My Thoughts:

-To my knowledge they are, i know BigDare would cheat me like that.

-Yes Its from a DA and thanks for the info:goodjob:

-I know it is so there is a name change thread back to sakasaku

-Okay thanks for the English lesson I will keep that in mind

-Okay thank you that will be help if I ever go into the witness protection and i am filling out the forms.

-Yes i planned on lighting when i take it to a machine shop, Dare and I talked about it yesterday when we did the trade

- I plan to get CR-X seat down the line

[AnTi-PooN]

i got si front seats ;)

[sakasaku]

i got si front seats ;)
how much?

[AnTi-PooN]

50

[00CelicaGT]

DAMN MAN U CAME A LONG WAY, IT'S LOOKING REALLY GOOD. I KNOW IT'S HOT AS A SLAVE SHIP IN THAT STORAGE UNIT. UNLESS U GOT ONE THATS CLIMATE CONTROLLED, BUT FROM THE PICS I THINK IT'S A HOT BOX. HOPE TO SEE IT RUNNIN SOON

[00CelicaGT]

how much?

HELL IF HE DOESNT WANT THEM ILL TAKE THEM! THAT IS $50 EACH RIGHT? CASH IN HAND!

[JDMJAYDC2]

i really dont understand this whole crx seats in a hatch thing its a hatch!!!!!

[jfrolang]

i really dont understand this whole crx seats in a hatch thing its a hatch!!!!!QFT.


Celica, dude, turn off the caps. Yeah yeah, your work, whatever. It's one keystroke.

[bigdare23]

:thinking:

Those aren't DA knuckles, they are 88 CRX Si knuckle. I don't know where you got DA knuckles from because I said they came from my CRX. I'm in the process of trying to find DA Knuckles for my hatch.

[sakasaku]

will they work for my swap?

[jfrolang]

I'm guessing you have a STD hatch? The 88 Si knuckles will still be an upgrade, and they'll still work with a B swap.

[B_Hoov]

im picking up some DA spindles Saturday, will the entire spindle bolt in place or just the hub?

[sakasaku]

I'm guessing you have a STD hatch? The 88 Si knuckles will still be an upgrade, and they'll still work with a B swap.


:bump:yes i do and thnx!!!

[jfrolang]

im picking up some DA spindles Saturday, will the entire spindle bolt in place or just the hub?
I know I'm gonna sound like a jerk but oh well, I do in just about every other post anyway. Hondas don't have spindles, they have knuckles. The hub is the part that the wheel bolts are in and the axle slides into, that is pressed into the wheel bearing, which is pressed into the knuckle.

So back on topic, swap the whole knuckle. Swapping just the hub is not only impossible because of a different bearing size, but it also wouldn't help in properly locating the caliper for the larger rotors.

[sakasaku]

i really dont understand this whole crx seats in a hatch thing its a hatch!!!!!

its pimp son!!!!!!

[00CelicaGT]

its pimp son!!!!!!

and comfy too:goodjob: