List of things for turbo set up

[MR.EM1]

Ok guys im about to buy a turbo and an LS swap. Question is WHAT ARE ALL THE IMPORTANT THINGS NECESSITIES TO RUN MY TURBO SET UP????

I (will) have:

-b18b
-b16 tranny, ecu, harness
-turbo kit wastegate, bov, turbo, IC (piping), boost gauge, afr gauage,
-going into my 99 EM1
-OBD2
-injectors
-fuel pump
-oil lines

do i NEED a different ECu?? turbo timer? intake manifold??

[patrick4588]

-b18b
-b16 tranny, ecu, harness
-turbo kit wastegate, bov, turbo, IC (piping), boost gauge, afr gauage,
-going into my 99 EM1
-OBD2
-injectors
-fuel pump
-oil lines

do i NEED a different ECu?? turbo timer? intake manifold??

you will need a wideband, a regular afr gauge is gay and wont tell you anything. you need a new ecu definitely, and a tune. will need to convert the obd2 to obd1. you dont need a new intake manifold or turbo timer. doesnt sound to me like you have done much research yet.

[osnap]

http://www.importatlanta.com/forums/forumdisplay.php?f=32
http://www.importatlanta.com/forums/showthread.php?t=147561
http://www.google.com

...no, srsly. search is your friend. :rolleyes:

[Barefoot]

doesnt sound to me like you have done much research yet.
http://www.importatlanta.com/forums/forumdisplay.php?f=32
http://www.importatlanta.com/forums/showthread.php?t=147561
http://www.google.com

...no, srsly. search is your friend. :rolleyes:yup

[khaxnguyen]

as cheap as a turbo timer is, get it. it will help keep your turbo alive longer by letting the oil cool down and not quickly seize up in the turbo

[Gorilla Eg!]

as cheap as a turbo timer is, get it. it will help keep your turbo alive longer by letting the oil cool down and not quickly seize up in the turbo

listen to the man!!!!!! :goodjob:

[scttydb411]

1. obd2b-obd1 conversion harness from www.boomslang.us
2. socketed/chipped ecu from me
3. tuning from me
4. don't bother with the afr gauge unless you want to drop some coin on a wideband
5. don't bother with the turbo timer either unless you plan on boosting right up to the point you park the car and shut it off. the turbo-timer allows you to idle the car for 1-2 min once you park. if you don't drive like a mad-man and are just cruising for a couple min before you park and shut off the car you're ok. i've been running the same turbo for over 5 years and over 75k miles and don't have a turbo timer.

[watdaflo?]

Ok guys im about to buy a turbo and an LS swap. Question is WHAT ARE ALL THE IMPORTANT THINGS NECESSITIES TO RUN MY TURBO SET UP????

I (will) have:

-b18b
-b16 tranny, ecu, harness
-turbo kit wastegate, bov, turbo, IC (piping), boost gauge, afr gauage,
-going into my 99 EM1
-OBD2
-injectors
-fuel pump
-oil lines

do i NEED a different ECu?? turbo timer? intake manifold??

off the top of my head, downpipe, i would get some type of fuel management, exhaust manifold, maybe a fuel pressure regulator.

[patrick4588]

i dont run a turbo timer. after making some boost pulls, just cruise at low load and that will sufficiently cool the turbo.

[ILLSMOKEu]

Thats my list of stuff that i got on my car for turbo
Turbo
Turbo Manifold
waste gate
Turbo timer
Boost controller
oil line
Injectors
Flex pipe
Intercooler
Intercooler piping
hi flow cat(Optional)
p72 Ecu
OBD2 to OBD1 conversion
silicon couplers
4bolt flange
tbolts clamps
flange for wastgate
Blow off Valve
muffler 3"
rezinator
map sensor
waisgate spring
exhaust wrap
full exhaust 3"
sparplugs (optional)
oil catch tank
New radiator (optional )
there might be few more thing that i forgot right of my head,so think about what u really need...

[patrick4588]

clutch

[Vteckidd]

Ok guys im about to buy a turbo and an LS swap. Question is WHAT ARE ALL THE IMPORTANT THINGS NECESSITIES TO RUN MY TURBO SET UP????

I (will) have:

-b18b
-b16 tranny, ecu, harness
-turbo kit wastegate, bov, turbo, IC (piping), boost gauge, afr gauage,
-going into my 99 EM1
-OBD2
-injectors
-fuel pump
-oil lines

do i NEED a different ECu?? turbo timer? intake manifold??
http://www.importatlanta.com/forums/showthread.php?t=147561

[AnTi-PooN]

you dont want a b16 tranny either

[bRiAnMcIvIcS]

Possibly a:
Skunk2 intake manifold, Edelbrock 65mm throttle body, and Skunk2 Megapower R 2.75 inch cat-back exhaust.:goodjob:

[Master Shake]

http://www.importatlanta.com/forums/showthread.php?t=147561:goodjob: everything you need to know.

[dirk-diggler]

bump

[patrick4588]

why did you bump this thread? fail