PDA

View Full Version : LS Motor and D16Y8 Tranny For Sale



topsecret2JZ
06-05-2008, 04:51 PM
Between 120,000 and 140,000 miles
Tranny does not grind
the motor has the wiring harness
ecu
shift linkage
i may have axels
Motor has been sitting for about 4 months
Ran great when it was pulled i pulled it to put in my hatch then found out that OBDO was different to swap then OBD1 so i never swapped it
I want 800 bucks for it, i actually have the shell still so if you need anythign else it will still be on the car (motor swap stuff only)
The shell is also for sale it is in primer and needs work 400 bucks i will get picks of it later tonight

The D16Y8 Tranny is fine no grinds was on the motor and did perfect when taken off I had a buyer for it but it fell through so it is back up for sale, I actually have two of these the other grinbds and is going to be trashed i think though it grinded bad, thats why i got this one it was going to replace the bad one but i got rid of my honda and the motor so....200 bucks for this and i have the shift linkage for this also i think i will have to check

topsecret2JZ
06-05-2008, 04:52 PM
Oh yeah and this stuff will have to be picked up, I live in walton county

AnTi-PooN
06-05-2008, 05:22 PM
how much for the ls???

how far are you from the mall of ga?

topsecret2JZ
06-05-2008, 06:49 PM
800 bucks and about 45 minutes you know where winder is? i live 10 minutes from there

AnTi-PooN
06-05-2008, 07:41 PM
any trades for it? plus cash?? i need it.... or partout the dizzy

AnTi-PooN
06-05-2008, 07:42 PM
500 and you keep the tranny?

topsecret2JZ
06-05-2008, 09:15 PM
pmed

topsecret2JZ
06-05-2008, 09:15 PM
what kind oif trade were you talking about out of interest

j0natell0
06-06-2008, 12:35 AM
wut kind of shell do u have. if its a 92-95 civic i need the fenders. pm me if so

delslo
06-06-2008, 09:03 AM
can u cut me a deal if i get motor and shell all at once? if so just pm me and let me know

preferredduck
06-06-2008, 11:34 AM
800 bucks and about 45 minutes you know where winder is? i live 10 minutes from there

winder lol!!! i didn't know there were imports in walton county j/k. im in barrow

skinny is only like 25mins away at the most.

topsecret2JZ
06-06-2008, 11:44 AM
hell yeah we should all hang out sometime or somthing you gguys ever go to the winder meets?

topsecret2JZ
06-07-2008, 06:04 PM
daily bump

Scotsman
06-07-2008, 06:06 PM
i thought that B18 was Jarron's?

preferredduck
06-07-2008, 07:36 PM
hell yeah we should all hang out sometime or somthing you gguys ever go to the winder meets?

not really, im a lil old for sonic.

topsecret2JZ
06-07-2008, 07:47 PM
I was gonna hook Jarron up with it if he sold the shell but now that the bike a have does not run i need cash to fix the peice oif ****

topsecret2JZ
06-08-2008, 04:07 PM
Come on guys i need some cash, if you give me 1000 bucks for the Ls swap, ill throw in the shell also, it needs a lot of work but it has a title and it is fixable, i just need the cash to fix this ****ing motorcycle

kngkahious
06-08-2008, 09:52 PM
why dont you sale the bike as it is and fix the car?

topsecret2JZ
06-08-2008, 10:10 PM
Cause i wanna keep the bike and fix it, plus i dont feel like putting the motor back in the car and ****, its to ****ing hot outside to be doing all that, I also need to clean out my shop anyway, ythats the main reason i am getting rid of all this to fix my bike and to get some space in my shop for other stuff

topsecret2JZ
06-09-2008, 11:04 AM
bump someone buy, i need this gone soon

JDBenson
06-09-2008, 11:41 AM
how many miles are on the Y8 tranny? when was the clutch changed or is it stock? reciepts of when/if clutch was changed?

topsecret2JZ
06-09-2008, 11:47 AM
Um the clutch is not on the tranny it was on the motor, and the tranny has i would say between 125,000 and 140,000,

1SOL2NV
06-09-2008, 12:01 PM
vouch for seller ..... seen motor and trans a while ago ....like a couple of months ago ...sell the bike get another sol !!!!!

topsecret2JZ
06-09-2008, 12:29 PM
That is what i am kinda thinking about doing, i miss my sol

topsecret2JZ
06-10-2008, 03:10 AM
bump

1SOL2NV
06-10-2008, 03:42 AM
i can find u a sol .. jus say the magic words lol .....

topsecret2JZ
06-10-2008, 11:00 AM
find me one for the bike as it sits

jdm_ef
06-10-2008, 11:17 AM
hey im looking for a good shell pm me with all the details on it and it might be sold really soon i got the cash in hand right now

topsecret2JZ
06-10-2008, 11:23 AM
The shell needs a lot of work, thats why i was gonna throw it in with the motor for an extra 200 bucks

topsecret2JZ
06-11-2008, 11:40 AM
bump need gone someone buy this stuff

Just_CHill
06-11-2008, 01:53 PM
Got pics of the shell?

topsecret2JZ
06-11-2008, 02:49 PM
yeah everyone has asked abouyt the shell i am going to try and take some pics of it tomorrow and post it for you guys sorry it has been a while but yeah ill get some

topsecret2JZ
06-11-2008, 02:52 PM
The shell needs paint, interior carpet and peices, they have been painted blue, it needs headlights, the center peice above the rear bumper, it does have a sunroof that works, all glass windsheild is finr, body is in decent shape, needs a driver side fender, its there just dented, but yeah i will take some pics they will look like **** though untill i can get the car out of my shop and take better ones, clean title

MrTurboCivic
06-11-2008, 11:03 PM
bump

topsecret2JZ
06-12-2008, 02:23 PM
here are some ****ty pics of the shell they are the best i can get untill i have someone help me get it out of the shop sorry guys

~GILLEY~
06-12-2008, 03:17 PM
bump for a guy that needs cash just like me lol

1SOL2NV
06-12-2008, 03:36 PM
answer YOUR CELL PHONE !!!!! lol

~GILLEY~
06-12-2008, 04:15 PM
who????

1SOL2NV
06-12-2008, 04:17 PM
chris

topsecret2JZ
06-12-2008, 04:32 PM
oh **** you tried to call, sorry my phone has been acting up whats up man

1SOL2NV
06-12-2008, 04:38 PM
call me

topsecret2JZ
06-13-2008, 10:29 AM
bump

topsecret2JZ
06-14-2008, 11:41 AM
bump

j0natell0
06-14-2008, 11:54 AM
will u install the motor in my shell for extra cash?

topsecret2JZ
06-14-2008, 01:15 PM
I would rather not do that because i dont really wanna be responsible for putting it in and all but if you buy the motor from me for 800 and take it to 1sol2nv he will install it for you, pm him or something

1SOL2NV
06-14-2008, 02:48 PM
ill do it at your house chris if thats aight . i charge 350 for labor if its a basic swap . u must provide all parts . and wut "Shell " is it going in ????

topsecret2JZ
06-14-2008, 03:18 PM
yeah it would be finbe, like he said what shell and all and you would have to see what parts, i have the swap but if its in a different car you might need mounts and axels and maybe more im not sure thats why i wouldnt do the swap myself but like i said 1sol2nv has donbe a lot so pm him and he will ,let you know what you would need

1SOL2NV
06-14-2008, 03:20 PM
i pmed him already .... lol one step ahead son . lol

1SOL2NV
06-14-2008, 03:21 PM
if it is a 90-91 Da integra its a direct bolt in ... 350 ... if this is going in a 92+ car .. would be 500 and i wonder wut it takes to become a site sponsor ? hmmmm

topsecret2JZ
06-14-2008, 05:03 PM
Hey man im not going to be able to do that at my house i was working on a car earlier and my air compresser is really acting up so... I dont really wanna try and do it at my house because i dont wanna get halfway through and have no air or anything you know plus i might be starting a new job soon so i wouldnt know when i would be able to, hey John could you do it out your way or something? If the guy gets the motor

1SOL2NV
06-14-2008, 05:31 PM
he wont be willing to drive to me lol .... but thats aight tho good looking out .

topsecret2JZ
06-15-2008, 01:30 PM
bump

topsecret2JZ
06-16-2008, 12:06 PM
bump come on someone buy this **** please

topsecret2JZ
06-16-2008, 11:08 PM
bump

slostang
06-17-2008, 12:16 AM
the motor is obd1 right?

1SOL2NV
06-17-2008, 12:58 AM
its obd-0

slostang
06-17-2008, 01:05 AM
oh nvm, gl though.

topsecret2JZ
06-20-2008, 01:12 AM
bump need gone i need room

topsecret2JZ
09-06-2008, 08:46 AM
ttt still for sale, pm me for price some things have dropped, and also would be interested in trading the tranny for 92 eclipse parts

TougeGTR-33
09-06-2008, 09:38 AM
Bump, Hey you got a motorcycle now??

TougeGTR-33
09-06-2008, 09:39 AM
Bump

TougeGTR-33
09-07-2008, 05:47 AM
Bump

fsuskppy
09-17-2008, 10:03 AM
are you willing to part just the tranny

topsecret2JZ
09-25-2008, 01:41 PM
bump pm me about the tranny i might think about it dependoing on how much you wanna spend the tranny has been rebuilt and only has 2000 miles on it so...

USA_EK9
09-25-2008, 01:50 PM
what year of the car was it???

240sx_boi
09-26-2008, 11:39 AM
is it a cable tranny... for the d16 and can it fit a d15???

1SOL2NV
09-26-2008, 11:45 AM
no ... the cable tranny is on the b18a1 ... and the d16y8 tranny is a hydro .and if you have a 92+ civic that uses a hydro tranny then yes it will bolt to a d15 ... if you have a cable clutch ..no unless u buy a converion .

240sx_boi
09-26-2008, 11:54 AM
ok thank, i really need a cable tranny... how hard is it to conver it... ??

topsecret2JZ
10-07-2008, 01:06 PM
bump

topsecret2JZ
10-14-2008, 10:56 PM
bump i will go down in price need gone shoot me offers

topsecret2JZ
10-16-2008, 11:21 AM
bump

topsecret2JZ
10-21-2008, 08:38 AM
bump need gone willing to part out

topsecret2JZ
10-24-2008, 09:47 AM
bump 350 for the ls swap please someone buy this i really need the cash and i really need this gone

dxhatch
10-24-2008, 04:28 PM
I trade you a ipod touch plus cash for the ls

topsecret2JZ
10-28-2008, 03:03 PM
what gig is it and how much cash you talking about

joseseclipse9
10-28-2008, 05:05 PM
is the civic a 2 door 4 door or hatch

topsecret2JZ
10-31-2008, 07:55 PM
what civic are you talking about

Scotsman
10-31-2008, 08:00 PM
great seller

topsecret2JZ
11-04-2008, 02:09 PM
bump come on people someone buy this i still have the tranny and the ls swap come on

topsecret2JZ
11-06-2008, 01:06 PM
bump

topsecret2JZ
11-12-2008, 10:28 AM
bump need gone come onnnnnnnnnnnnnnnnn

topsecret2JZ
11-19-2008, 09:58 AM
bumpo

hmong_Spec
11-19-2008, 01:01 PM
will u b able to part out the distributor and if u will how much for it

topsecret2JZ
12-10-2008, 12:16 PM
pm me