alignment shop for lowered civic

[B_Hoov]

need an alignment shop to align my wifes 92 EG 4 door, has skunk 2 "2.5" lowering springs and shocks on it, took it to a guy in oakwood and the printout off his rack states that the front left is -4 and right is -2.3, left is bad due to a ball joint that i have, just needs put in, he is claiming that he can't fix it, i should not have lowered it, it's going to scrape, blah blah blah...has 15x7's with 205/50/15's, i dont want it perfect, -1.5 would be great on the front and the back is good where it sits, just need the toe and camber taken care of in the front.

[Barefoot]

where u located

[B_Hoov]

flowery branch but i can go wherever

[RBS]

well if wherever come down to Jonesboro in Clayton County and visit Honda Acura Specialists

[B_Hoov]

looking them up now

[B_Hoov]

says it's an hour away...got one place im going to try tomorrow and if they cannot do it i will be coming that way!

[XanRules]

Gran Turismo East!

[Barefoot]

well if wherever come down to Jonesboro in Clayton County and visit Honda Acura Specialistsx2:goodjob:

[SLOWLYbtngU]

Bridgestone off of Peachtree Industrial did Kashime's...and by "Kashime" I mean Dirty Octopus... if they could align his car, they can do your wife's

[B_Hoov]

where on Peachtree industrial?

[SixSquared]

Porterfield Tire in Athens

[AnthonyF]

Gran Turismo East!

GTE, the ONLY place you should go. Tell them A to Z on buford Hwy sent you.

-Ant.

[Barefoot]

GTE, the ONLY place you should go. Tell them A to Z on buford Hwy sent you.

-Ant.i dont know about all that. there are other shops out there who do great alignments on lowered cars.

[JDMef88]

peachtree ind is what mcever road turns into if u take it south towards suwanne and pleasant hill

[AnthonyF]

^you shut up. lol. I rep them to the fullest. So I am biased towards their shop.

-Ant.

[B_Hoov]

well looks like i have an array of choices here, have not heard anything bad about either one yet, if arrow tire and alignment in gainesville does not work out i will go to the closest one i guess.

[Thighs]

all tire + wheel at hwy 316 and 29.

tell them jesse sent you.

[B_Hoov]

peachtree ind is what mcever road turns into if u take it south towards suwanne and pleasant hill


i know that but it goes from there clear into atl, i need to know a more specific area than PIB

[Barefoot]

^you shut up. lol. I rep them to the fullest. So I am biased towards their shop.

-Ant.lol i feel yah :cheers:

[carbon_crash]

need an alignment shop to align my wifes 92 EG 4 door, has skunk 2 "2.5" lowering springs and shocks on it, took it to a guy in oakwood and the printout off his rack states that the front left is -4 and right is -2.3, left is bad due to a ball joint that i have, just needs put in, he is claiming that he can't fix it, i should not have lowered it, it's going to scrape, blah blah blah...has 15x7's with 205/50/15's, i dont want it perfect, -1.5 would be great on the front and the back is good where it sits, just need the toe and camber taken care of in the front.

Have you tried Meineke off Friendship road? They did my car awhile back, hell the guy even got out the 2x6s to extend the ramping more to get my car on the rack

[B_Hoov]

just got it back, paid 114.50 for an alignment and to have a ball joint put in, it still pulls to the right and camber on the drivers side is still like -3 where as the pass side is fine...i will be going to grand turismo east monday!

[TheDarkRacer]

Might be bent suspension parts. Have GTE check for that too.
~TDR

[green91]

just got it back, paid 114.50 for an alignment and to have a ball joint put in, it still pulls to the right and camber on the drivers side is still like -3 where as the pass side is fine...i will be going to grand turismo east monday!


post a pic of your alignment sheet and i can help you.

[B_Hoov]

they said before they started it was -4 left and -2.3 right,now sits 1.2 right and 3.3 left. dont have the actual print out but i can get it im sure for what i paid.

[green91]

While camber can play a roll in causing a pull, caster is usually the biggest cause of a pull. Camber pulls to the side that is more positive if they arent equal so im going to guess there is another cause for your pull. Do you have a camber kit?

[B_Hoov]

just the ball joint type and yes it pulls to the right which is the more positive side

[green91]

post pics of the sheet if you get it

[BKgen®]

GTE

/thread

[green91]

ill bet money i can do alignments as well as them