99-00 front end

[phuoc_dat]

Does anyone know how hard is it to install a 99-00 civic front end on a 96-98 civic. Are there any crazy mods involved. Do you guys know how much they run for?

[FasTech]

About the only help I can give you is, I had a buddy that did it and he said it wasn't that hard just took a little time. I've never done it so I can't tell if its easy but it was worth it in my opinion. Look really good and you can tell a huge difference. He got all his stuff for like $400 off of a wrecked civic. So try hitting up the salvage yard.

[phuoc_dat]

thanks repped

[Barefoot]

its pretty easy. nothing major invovled just got to make sure u have clean lines.

[boostedb16]

all you need is hood,headlights,fender's and a bumper and your good to go.

[gtikid]

Someone is/was selling one on here for about $200 I believe...

[JDMEK18]

Yeah..I'm doing a conversion right now on my 96 to 99-00.. just have to cut here and there once or twice and for the fender and your good to go.. fenders and hood line up perfect with no modding.. just that front bumper.. take your time and it will come out clean!!

[phuoc_dat]

IF i use all certifit parts will that be really bad? How bad are the quality for certifit parts compared to oem parts.?

[RBS]

IF i use all certifit parts will that be really bad? How bad are the quality for certifit parts compared to oem parts.?

certifit is alright... my front end is all certifit, but it took a while for me to get it how it is now though. when i first put it on it was horrible to the max

[JDMef88]

buy the 99-00 front end and ill put it on ur car

[phuoc_dat]

for fREE? :)

[JDMEK18]

Yeah.. my front end is certifit also and its not bad at all once you play with it.. Just takes a little time.

[quiet_s0ng]

is not hard, i did it to my 97 hatch. the only trouble i ran into was getting the si grill to fit right other then that if you have all the part everything bolts up. tip for you is not to tight up all the bolts right away cuz you'll going to have to wiggle some of the parts around if you want clean lines then tighten it when you like what you see.

[bafbrian]

I did the 99-00 front end conversion and the only thing I had to do to fit everything was to bend the two other metal clips that hold up the front bumper.

[phuoc_dat]

thanks guys. i guess ill just get my parts from certifit.. :)