View Full Version : how to replace exsaust stem seals
Arm&hammer
05-04-2008, 09:19 PM
i am working on a d15b7 and i cannot get the springs that hold the stem seals off so i can replace the stem seals. i have alredy changed the intake stem seals but the i cant change the exsaust stem seals because of the springs. any ideas on how to get tem off? any help will be repped. thanks in advance
1flysi
05-05-2008, 12:15 AM
Are you trying to get the keepers off?
Barefoot
05-05-2008, 08:07 AM
over head spring compressor
AnthonyF
05-05-2008, 10:33 AM
jdmb16-i would advise you not to make an attempt at this. You might hurt yourself. I recommend Dover heads. If you go there, see Jesse, tell him Anthony sent you. :goodjob:
-Ant.
Arm&hammer
05-05-2008, 04:32 PM
Are you trying to get the keepers off?
yeah. i cant get them off
Arm&hammer
05-05-2008, 04:33 PM
jdmb16-i would advise you not to make an attempt at this. You might hurt yourself. I recommend Dover heads. If you go there, see Jesse, tell him Anthony sent you. :goodjob:
-Ant.
how much do you think he would charge?
do it the joe 6 pack way and get a socket a little smaller than ur retainer, put socket over the retainer and hit socket with a hammer just enough to compress the spring about half way. if u hit too hard u could bend a valve and good luck getting everything back 2gether without the right tool but u asked how to get them off right. lol!
Arm&hammer
05-05-2008, 08:47 PM
do it the joe 6 pack way and get a socket a little smaller than ur retainer, put socket over the retainer and hit socket with a hammer just enough to compress the spring about half way. if u hit too hard u could bend a valve and good luck getting everything back 2gether without the right tool but u asked how to get them off right. lol!
it might work. i dont want to bend my valves though. lol thanks anyways
Arm&hammer
05-05-2008, 08:49 PM
over head spring compressor
it think thats what i need.
where do you think i could find it? i alredy checked autozone.
Barefoot
05-05-2008, 09:05 PM
it think thats what i need.
where do you think i could find it? i alredy checked autozone.i got mines from snap on.
AnthonyF
05-05-2008, 09:09 PM
how much do you think he would charge?not much. They always hook me up and they love me there. lol. It would def be under 100 bucks, I would let them surface and leak chead ur head. make sure its A, Ok. :goodjob:
-Ant.
Arm&hammer
05-05-2008, 09:31 PM
not much. They always hook me up and they love me there. lol. It would def be under 100 bucks, I would let them surface and leak chead ur head. make sure its A, Ok. :goodjob:
-Ant.
whats the location of this place?
Arm&hammer
05-11-2008, 10:31 PM
i fixed the problem myself
Schugg
05-11-2008, 10:46 PM
take a while?? been about 6 days since the last post!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.