PDA

View Full Version : Question about an Alpine stereo



HHH3010
05-01-2008, 03:06 PM
I have just put an Alpine stereo (model #CDA-9884) in my 2001 Mitsubishi Eclipse. It is wired up to the Amp up under the seat and 2 15" Soundstorm subs and a Ample Audio Amp. I have adjusted all of the settings on the stereo or at least I think I have. The problem is the subs are just barely thumbing and I don't know what is causing this. When I had the factory stereo wired up they were Hitting hard and now there not. If anyone knows what might be causing this please let me know.

bb4pimp
05-01-2008, 09:09 PM
arn't there control knobs on the amp?

Turbo04
05-01-2008, 09:22 PM
All the alpines i've owned with the exception of the newest one I have always put out a lot less bass in the signal compared to some of the other radios I've owned.

HHH3010
05-01-2008, 09:55 PM
arn't there control knobs on the amp?
Yeah there is. I have it set where there is nothing but bass coming through the subs and it is turned up all the way.

sina518
05-01-2008, 10:07 PM
check the sub control level on the head unit. when you ran the rca's from the amp to the radio did you hook it up to subwoofer out?

HHH3010
05-01-2008, 10:18 PM
check the sub control level on the head unit. when you ran the rca's from the amp to the radio did you hook it up to subwoofer out?
Yeah the RCAs are in Subwoofer out.

joshk5145
05-01-2008, 10:20 PM
were your subs rewired on your amp. also check what preout voltage you have it probaly says on the cd player. and some amps have an input sensitivity setting. how do you have the 15's hooked up? bridged or stereo?

HHH3010
05-01-2008, 10:32 PM
were your subs rewired on your amp. also check what preout voltage you have it probaly says on the cd player. and some amps have an input sensitivity setting. how do you have the 15's hooked up? bridged or stereo?
No the subs were not rewired. It has 3 preouts (2V). I'm not real sure about the input sensitivity setting. I'll check that tomorrow and let you know. Also the subs are Stereo.

patrick4588
05-02-2008, 12:34 AM
2v pre-outs ftl. check your sub output settings on the alpine head unit and make sure on the amp you have it set for low input. i would check your amp settings. where is the low pass filter set? put it around 80. if you have it too low <50 , then you wont get any bass hardly.

0\s accord
05-02-2008, 10:22 AM
check rca's thats why mine 2 tens hit like a pioneer sub at wal-mart =\ but its good now

99GAGT
05-06-2008, 06:53 AM
Make sure your subwoofer setting on the head unit is up, and check the tuning on the amp. What are your settings on the amp?