WTB Air Compressor

[Bishop]

Mine took a shit a while ago and is going to cost $170 to fix....Let me know what you have for around $200.

[Bishop]

Oh and i need a 25 gallon +

[Spyder]

http://www.harborfreight.com/

[Bishop]

link doesnt work...

[Spyder]

try again , i just dropped it back to the root website. :)

[Bishop]

Thanks!

[Bishop]

Anyone know of any stores that sell used compressors? I found this one on ebay... http://cgi.ebay.com/ebaymotors/60-gal-Air-Compressor-Powermate-Black-Max-BL6006016_W0QQcmdZViewItemQQcategoryZ43986QQitemZ4 568486617QQrdZ1#ebayphotohosting

have to drive to florida to get it though

[Spyder]

you need to see what reserve is on it, also know that with a used compressor you may be in the same situation you are now in a few weeks. dont forget that compressor you just posted from ebay is a 240 volt one...

[Bishop]

you need to see what reserve is on it, also know that with a used compressor you may be in the same situation you are now in a few weeks. dont forget that compressor you just posted from ebay is a 240 volt one...
Yeah i know its 240...The prob with my old one is that it wasn't getting enough air to it and over heated...I dont think i would drive down to florida to get it anyways...going off to school in the end of september and wont be using it that much...i may just put a new motor in my old one....unless someone can get me a good deal maybe....lol

[Spyder]

Yeah i know its 240...The prob with my old one is that it wasn't getting enough air to it and over heated...I dont think i would drive down to florida to get it anyways...going off to school in the end of september and wont be using it that much...i may just put a new motor in my old one....unless someone can get me a good deal maybe....lol

check granger and northern for the motors, what HP was it?

[Bishop]

i think it was about 5 hp...its in the shop right now so i dunno

[Spyder]

i think it was about 5 hp...its in the shop right now so i dunno

if its a normal 20 gallon roll around one , then it is a 3.5-5 hp motor, which means it can be replaced for about 100 bucks at northern.. and its local :)

[Bishop]

if its a normal 20 gallon roll around one , then it is a 3.5-5 hp motor, which means it can be replaced for about 100 bucks at northern.. and its local :)
Awesome! Thanks. Are they pretty easy to install?

[Spyder]

Awesome! Thanks. Are they pretty easy to install?

hardest part is getting the pully set on there correctly, the only other thing is, if its a "integrated" motor or however they sold it its not so easy to fix. if it is a decent compressor it will have a pump and a motor as 2 seperate parts..