my motor is in...

[B_Hoov]

thanks to goinfasterthanu, gotta weld up my pcv valve bung, and my vent bung on the bak, then welding an fittings on the front for venting, then it's off to see bucky, want it to be this exact color ( bandy wine w/candy ) but it's in, mocked up to weld the pass side tranny mount in, still have tons of stuff to do...

[Athens_Red_Rexin]

Nice work man!

[HeLLo iM iZzY]

What car is this going in?

[B_Hoov]

90 EF sedan

[Whiteboy™]

a sedan!? i demand more pictures

[Revmaynard]

That thing is going to be effing sick! I can't wait to see it!

[B_Hoov]

thats all anyone is getting for now, the body needs work, interior is mint, cant decide on viper red or champ white with pearl for paint though...

[BB1_Luda]

JDM H22a.

Nice motor, what all is done to it?

x2 on more pics.

[B_Hoov]

damnit...taking more now...

[Whiteboy™]

you could at least pm them to me, i am a ****ing ef sedan junkie

[B_Hoov]

more...this is ALL your getting for now...you wanna see more..come help. lol

[B_Hoov]

bare metal spots are where i hit the car with a da to knock off surface rust, HUGE crease in rear pass side door...not looking forward to that...

[DB4LYFE ™]

well dayum if u leave it like that for a lil.... lets say sleepr :crazy: lol! nah i like it thoe. real nice motor :goodjob::goodjob:

[xlilvi3tx]

h duce duce. nice motor dude. +some

[B_Hoov]

JDM H22a.

Nice motor, what all is done to it?

x2 on more pics.


hahaha :D

h22a w/ hardened golden eagle sleeves and LSD
ARP head studs
ARP oversize rod bolts
spin balanced and blue printed
ported and polished head
JE pistons 9:1
crower pro billet rods ( have tag )
crower 0/5mm oversize intake and exhaust valves
crower titanium springs and retainers
crower lightweight polished crank
crower beast cams ( have tag )
ferrea valve guides
skunk 2 fully adj cam gears
prodrive billet oil pump
garrett GT40R
1000cc peak and hold pl4 RC injectors
golden eagle intake manifold
aem fuel rail
aeromotive fuel pressure regulator
hondata s300
10mm spark plug wires
MSD 6AL ignition
MSD blaster SS coil
cometic head gasket


there is more just holding back...for now :ninja:

[B_Hoov]

any more thoughts, comments...weekend helpers???

[Revmaynard]

It looks like you've got your work cut out for you on that body. Are you going to prep it yourself?

[LS2ner]

Sick man, but for some reason i know it was gonna be a turbo as soon as i saw the pic.

Are you leaving the bay red and painting the outside a diff color?

[B_Hoov]

bay will be the same as the rest of the car, i will be doing all the body work, painting (except valve cover) really like the viper red paint i have...waiting to get everything else done before body work resumes, got impatient and started because it took forever to get mounts! it will probably be tuned before it's painted and body work is finished, lol

[Revmaynard]

bay will be the same as the rest of the car, i will be doing all the body work, painting (except valve cover) really like the viper red paint i have...waiting to get everything else done before body work resumes, got impatient and started because it took forever to get mounts! it will probably be tuned before it's painted and body work is finished, lol


If I get free time I might be able to come give a hand sanding that thing down.

[B_Hoov]

If I get free time I might be able to come give a hand sanding that thing down.


any help of any kind is greatly appreciated, might even grill out and have a few frosty beverages available...

[EJ_Allmota]

that ****s gonna be bad ass.. 9:1 piston, i presume is a BOOST motor :thinking:

[B_Hoov]

that ****s gonna be bad ass.. 9:1 piston, i presume is a BOOST motor :thinking:


:goodjob:

[LS2ner]

that ****s gonna be bad ass.. 9:1 piston, i presume is a BOOST motor




hahaha :D

h22a w/ hardened golden eagle sleeves and LSD
ARP head studs
ARP oversize rod bolts
spin balanced and blue printed
ported and polished head
JE pistons 9:1
crower pro billet rods ( have tag )
crower 0/5mm oversize intake and exhaust valves
crower titanium springs and retainers
crower lightweight polished crank
crower beast cams ( have tag )
ferrea valve guides
skunk 2 fully adj cam gears
prodrive billet oil pump
garrett GT40R
1000cc peak and hold pl4 RC injectors
golden eagle intake manifold
aem fuel rail
aeromotive fuel pressure regulator
hondata s300
10mm spark plug wires
MSD 6AL ignition
MSD blaster SS coil
cometic head gasket


there is more just holding back...for now :ninja:


I figured it was gonna be boost when i saw the ITM.

[GSRteg®]

Looking good keep up the good work.

[csmiths]

wow that is gonna be retarded fast

[B_Hoov]

daily bump

[N/A EK]

Nice :goodjob: BTW I thought u had the motor for sale???

[d_day87]

oh i see no thanks to me, while i could've been :nautjerk: to internet porn, i'm not helpin anymore unless you pay me with a little bit of beer. lol

[SiRed94]

looks like its going to be a beast...

[atl]

man that looks good bet you can't wait till it's done nice

[JEY$JDM]

gah dang bro! nice... ill trade ya right now!!! lol. we shall meet and take them pics as soon as we done with the foe does!!!! keep us all posted on the progress!

[JITB]

dam... i say red!!!

i thought u were a muscle car guy...lol

[B_Hoov]

im whatever...i know alot about both lol

[B_Hoov]

oh i see no thanks to me, while i could've been :nautjerk: to internet porn, i'm not helpin anymore unless you pay me with a little bit of beer. lol


i know i know...d-day87 had quite a hand in it as well, had a good time, no blood was spilled this time, we were out of con-dam-trol in my lil bitty garage, i can see beer...we would have just stood around talking about it like we have for the past month!

[Whiteboy™]

if you need any help with the suspension/interior let me know. I have ****in torn those things apart so many times

[B_Hoov]

if you need any help with the suspension/interior let me know. I have ****in torn those things apart so many times


gotta shave the cover over the lower control arm bolt to clear the diff on the tranny, and also have to shave my heim joints down that connect to the lower control arms and install those again, going to try tackling that saturday if you care to help? and i would also like to get the suede racing seats i have mounted up over the weekend as well. not sure if i want them flat on the floor with bracing or not, my head was hitting when i got in the car with the factory seats/brackets, im only 20 min from sonic in winder. lemme know

[mike's02ls1]

Looks good Bruce!! See you can have a family car and make it a quick DD... You need to see my wagon, it is a slow progress but will be a nice sleeper when done..

[d_day87]

damn skippy i'll bring the beer and "supervise". lol

[mushroom_toy]

I work on weekends , or you know I would help some lol. Im off all weeks though XD.

[B_Hoov]

I work on weekends , or you know I would help some lol. Im off all weeks though XD.


how convenient, as of now i was laid off 3 weeks ago so i have nothing to do all week but look for work, but the economy being the way it is it's hard to find a job and even harder to find a good one you can depend on.

[carbon_crash]

goona be one sick a$$ EF 4dr!

[B_Hoov]

preciate all the comments...any more thoughts? ideas?

[Just_CHill]

Looks good man.

[FasTech]

Looking sick bro, hope it goes good for ya...............G/L

[mushroom_toy]

Well **** man what you up to tomorrow?....well I guess today I mean.

[B_Hoov]

tired of hearing about how heavy this thing is going to be and how it's not going to handle worth $hit...we'll see though, motor is not that much heavier than stock and it's a 4 door not a rex so the extra weight of the car should more than offset the motor, turbo, etc...rode in goinfasterthanu's h22 hatch and i was quite impressed...just thought i would vent

[Papa_Smurf]

people are going to have their opinions bro, but i've read quite a few people from H-T that have H22's in EF hatch's say that it's not really that big of a deal, you just need the proper suspension setup.

your sedan is gonna be quick as fawk bro! can't wait to see it in person!

[mushroom_toy]

Im bringing my camera too....:ninja:

[B_Hoov]

mushroom toy got some pics, probably better than i took too, im sure he will post them, thanks for the help today man, theres plenty to do as you saw i just get frustrated with it from time to time and leave it for a day or so. but none the less thanks for the help

[BTLFED]

An H22 in an EF Sedan?! :eek:

Best idea EVAR! :goodjob:

[.::UNKNOWN::.]

people are going to have their opinions bro, but i've read quite a few people from H-T that have H22's in EF hatch's say that it's not really that big of a deal, you just need the proper suspension setup.

your sedan is gonna be quick as fawk bro! can't wait to see it in person! suspention isn't goin to help this guy...... if it is the same setup as his accord he is goin to need about 12 cynder blocks to get traction... this thing is goin to be a highway beast..... amazing setup none the least in the motor alone..... flawless install in a ef sedan= amazing sleeper

[mushroom_toy]

Yeah man your more than welcome..we didnt do much, but theres not much we can do at the moment. Once you get your pulley and stuff in you can size where you need to cut the apron for the clearance. Ill post the pics up in a thread in a few minutes.

[b16ftw]

hell yes.. very nice.

[mike's02ls1]

Bruce check your PM's

[nismo_b14]

puttin that in a 4dr civic, nice