PDA

View Full Version : New shop addition updates.


BUGMAN
04-19-2008, 02:24 AM
I know it has been almost forever but we have been real busy around here lately. We had 1 day last week and today to work on it but no where near being finished.

Figured I would post up for some suggestions since I am going to take me a long time to complete it.

I want to keep the floor clear as possible and not adding another lift.

Ideas/suggestions?

Oh and the floor color was picked by my kids so that will remain!

Anyone know where to find a wooden wire spool from?
BUGMAN
04-19-2008, 02:25 AM
One more of the shop and one of the spool in case you don't know what I am meaning.
santacruz77
04-19-2008, 09:19 AM
coming alont nicley man!
yogi08
04-19-2008, 09:24 AM
you can probably get a spool from a cable company up there man
KREEP
04-19-2008, 11:56 AM
Looks good man....when are you building the wall for the PB? Will that be last?
BUGMAN
04-19-2008, 03:05 PM
Not sure if we are going to build a structural wall or order a vinyl curtain like you see in large coolers and warehouses. We are not painting 24/7 so don't really want anything too permanent.
santacruz77
04-19-2008, 04:05 PM
thats a good idea ^
KREEP
04-19-2008, 05:33 PM
Not sure if we are going to build a structural wall or order a vinyl curtain like you see in large coolers and warehouses. We are not painting 24/7 so don't really want anything too permanent.
Cool vinyl removable curtain on tracks or some sh!t. Looking good keep it up...tell your boss man to give you a fuccin break sometime damn...lol
Masta's gots me workin
green91
04-19-2008, 07:16 PM
Thats a pretty good size shop, im not sure your ceiling is high enough for a life (to raise completely anyway), but i do like your tire/wheel rack and choice of flooring.
BUGMAN
04-19-2008, 11:54 PM
Thats a pretty good size shop, im not sure your ceiling is high enough for a life (to raise completely anyway), but i do like your tire/wheel rack and choice of flooring.

A 4 post drive on will work just fine because of the leg height but don't think I want to put one in there to be honest. I am adding a pole shelter to the left of the shop that will have the 4 post lift (outdoors) and the other side of the shop that you see there has a Ben Pearson 9k lift in it already.

Thanks for the compliment, I am trying to keep this side of the shop a little neater and clean while we use the other side for all the work/repairs, etc.

The other side of the shop has plenty of room to work in... There is another car behind the black as you can see in the 2nd picture to give ya a size reference. :)

What ya think?