dtmcnamara
04-16-2008, 02:33 PM
Ok I dont have a picture yet but they will be up by the end of the night when I get home. (MODS PM ME BEFORE CLOSING)
What I have here is a APC AP-7911 Rack PDU. This was ordered as a refurbished unit but will no longer be needed. It was tested by APC and we received it on friday so its practically new. I think it retails for $900 and ebay prices are between $600-$800 so I figured $500 obo and its yours. Like I said if you need pictures ask and I can open the box and take some, I was just trying to save time. Specs are below along with factory pictures:
Technical Specifications
Manufacturer: AMERICAN POWER CONVERSION-APC
Manufacturer Part Number: AP7911
UPC Code: 731304220503
Estimated Weight: 15.54 lbs
Manufacturer: APC (American Power Conversion)
Part number: AP7911
General
Device Type Power distribution strip - Rack-mountable
Height (Rack Units) 2
Width 17.5 in
Depth 4.5 in
Height 3.5 in
Weight 9.9 lbs
Enclosure Color Black
Power Device
Input Connector(s) 1 x Power NEMA L6-30
output connector(s) 16 x Power IEC 320 EN 60320 C13
Max Electric Current 30 A
Circuit Protection Circuit breaker
Networking
Remote Management Protocol HTTP, SNMP, Telnet
Expansion / Connectivity
Interfaces 1 x Management - Ethernet 10Base-T/100Base-TX - RJ-45, 1 x Management - RJ-11
Expansion Slots Total (Free) None
http://www.upsgalaxy.com/images/bigimages/1646.jpg
What I have here is a APC AP-7911 Rack PDU. This was ordered as a refurbished unit but will no longer be needed. It was tested by APC and we received it on friday so its practically new. I think it retails for $900 and ebay prices are between $600-$800 so I figured $500 obo and its yours. Like I said if you need pictures ask and I can open the box and take some, I was just trying to save time. Specs are below along with factory pictures:
Technical Specifications
Manufacturer: AMERICAN POWER CONVERSION-APC
Manufacturer Part Number: AP7911
UPC Code: 731304220503
Estimated Weight: 15.54 lbs
Manufacturer: APC (American Power Conversion)
Part number: AP7911
General
Device Type Power distribution strip - Rack-mountable
Height (Rack Units) 2
Width 17.5 in
Depth 4.5 in
Height 3.5 in
Weight 9.9 lbs
Enclosure Color Black
Power Device
Input Connector(s) 1 x Power NEMA L6-30
output connector(s) 16 x Power IEC 320 EN 60320 C13
Max Electric Current 30 A
Circuit Protection Circuit breaker
Networking
Remote Management Protocol HTTP, SNMP, Telnet
Expansion / Connectivity
Interfaces 1 x Management - Ethernet 10Base-T/100Base-TX - RJ-45, 1 x Management - RJ-11
Expansion Slots Total (Free) None
http://www.upsgalaxy.com/images/bigimages/1646.jpg