new build ?s

[y-49]

ok this is going to be my setup.

ls block and ls head. ported and polished with crower 404 cams and crower springs and retainers. pr3 pistons a.c.t flywheel and header and all the bolt ons i can get. and chiped and tuned with crome.

but my ?s are.

what kind of bearing,rings. and head gasket do i need to run.

i was thinking maybe clevite bearings. but i am unsure about rings and headgasket.

thanks for any help

[Barefoot]

OEM

[vtecgsrguy]

OEM
he's right! :goodjob:

[B18c1Turboed]

clevite bearings or ACl Bearings are fine, and run a OEM headgasket they seal better!!!
Rings it depends on the pistons you running, most aftermarket pistons come with Rings already so i would run those, if not OEM!!

[Just_CHill]

Most def OEM.

[arteg6]

shop on ebay-acl bearing ,the head gasket get oem ls gasket..

[LongLiveH2b]

^^^^^hahah EBAY what if thats defective parts! they'll still sell it:yes:^^^^
i mean ebay is not bad if your buying like corner lights, fender etc. But parts that play a major role in the engine :no:no way jose...

[Mr2raceworks]

^^^ DO NOT SHOP ON EBAY ^^^^ are you serious... are you really buying essentials for your motor on ebay... you are stupid man