The work for my 240sx powered w/ RB

[bluecivic]

hey guys this is latest 240sx with some work done with Footwerks suspension recently and also need more stuff for it and i need to get some advice from you guys. My 240sx are bone stock RB25 NEO and want to make it a sleeper that can run about 400HP daily, but don't which end to start. This is not my drift car this is my BABE other than my women at home LOL. This is some pic of my ride.

[Alan®]

this is the car pics section where are the pics?

[greasemunkey]

speak engrish before you come to our country please....o ****, nvm you has nice car, you ok here

[R32Dragon]

Wow, dont see NEO's much. Especially in a clean Kouki.
I'd start with the basics and work your way up from there, of course.

1.Intake
2.Exhaust
3.Dump and downpipe
4.Injectors [Nismo 555's sound good to me]
5.Fuel pump [Walbro 255lph]
6.Boost increase [12psi should net you much, high boost on 15]
7.Get a GOOD tune on quality engine managment equipment [Power FC] ahem...

Not sure if a stock RB25 snail can support 400WHP reliably though, may want to invest in a stouter unit.

[greasemunkey]

thought id help...

[bluecivic]

this is the car pics section where are the pics?
yes guy I will try go get better picture. i take some of the pic with my cheap phone that why the pics are so huge

[KillTheCrow]

Damn thats a nice s14.

[bluecivic]

thought id help...
thank for the pic man LOL

[bluecivic]

Wow, dont see NEO's much. Especially in a clean Kouki.
I'd start with the basics and work your way up from there, of course.

1.Intake
2.Exhaust
3.Dump and downpipe
4.Injectors
5.Fuel pump
6.Boost increase
7.Get a GOOD tune on quality engine managment equipment

Not sure if a stock RB25 snail can support 400WHP reliably though, may want to invest in a stouter unit.
good idea thank for the help. But I did some research on the RB25 Neo. It got around 280hp and 300 ft-lbs or more i thing it can handle. But never know unless i try. Either blow the motor or good to go right LOL

[bluecivic]

Damn thats a nice s14.
thank. she is sexy

[whitekoop]

lol Why you selling your footworks I called you about them a couple hours ago to bad they are for an s14 and not s13

[greasemunkey]

'{spell check}' Thank(s)

[whitekoop]

You should join 240atlanta.com
im on there!!!

[whitekoop]

where did you get that Tag in the front???

[bluecivic]

lol Why you selling your footworks I called you about them a couple hours ago to bad they are for an s14 and not s13
Still planning what to do with it. The Footwerks parts are good stuff is just because my wheel are too wide. Either i get some spacer on the front and four side of the fender roll out or else my wheel would either hit the fender or the front wheel touch the shock.

[bluecivic]

'{spell check}' Thank(s)
thank for the help i never proofread. Bad habit

[bluecivic]

You should join 240atlanta.com
im on there!!!
I will try to join soon

[bluecivic]

where did you get that Tag in the front???
i bought with the car.

[K24cb7coupe]

you need some wheels with a lower offset, it should help with the wheels hitting the coilovers

[puregroove]

Oh snap...so, you're the guy that bought the parts from my bro. He said you had a clean kouki. Bump for Footwerks/Extramade. :goodjob:

Let me know if I can take some better pics for you. Where are you located?

[JITB]

wow never seen that motor before... what did it come out of?

[bluecivic]

Oh snap...so, you're the guy that bought the parts from my bro. He said you had a clean kouki. Bump for Footwerks/Extramade. :goodjob:

Let me know if I can take some better pics for you. Where are you located?
Tucker hit me up whenever

[bluecivic]

wow never seen that motor before... what did it come out of?
98 R34 Skyline

[bluecivic]

you need some wheels with a lower offset, it should help with the wheels hitting the coilovers
yeah but I just got gram light wheel on and it not time for me to let it go and also want to coilover too. I might try to pull my fender and get some spacer soon.

[R32Dragon]

wow never seen that motor before... what did it come out of?

The RB25DET NEO motors are from R34 GTT Skylines. It is a RB25 block fitted with a performance oriented head, called the NEO head. It is rated at 280bhp. This has been your Nissan fact of the day.

[JITB]

The RB25DET NEO motors are from R34 GTT Skylines. It is a RB25 block fitted with a performance oriented head, called the NEO head. It is rated at 280bhp. This has been your Nissan fact of the day.


indeed it has... :goodjob: so is this the last version of the rb25?

is it like the neo sr20ve, version of the sr20de?

[xXThat GuyXx]

Damn thats a nice s14.

i'd do her

[R32Dragon]

indeed it has... :goodjob: so is this the last version of the rb25?

is it like the neo sr20ve, version of the sr20de?

Yeah, although it pains me to say it; the Nissan Ecology Oriented Variable Valve Lift and Timing (NEO VVL) system is not unlike Honda's VTEC. Truly a shame that this technology has been shelved by Nissan for the most part.

[MeanMugen]

get a jdm s14 silvia front end conversion :boobies:

[bluecivic]

Yeah, although it pains me to say it; the Nissan Ecology Oriented Variable Valve Lift and Timing (NEO VVL) system is not unlike Honda's VTEC. Truly a shame that this technology has been shelved by Nissan for the most part.
Man I learn alot from you thank

[bluecivic]

get a jdm s14 silvia front end conversion :boobies:
Would love to man, but can affort it now

[Krappy]

hey, i was the one who called you about the coilovers and talked about fender rolling...car looks good

[Extra Made]

I really wish I would've seen that engine, as it would have been my first time. VERY clean car:goodjob:

[bluecivic]

hey, i was the one who called you about the coilovers and talked about fender rolling...car looks good
Thank Lee. nice talking to you man

[bluecivic]

I really wish I would've seen that engine, as it would have been my first time. VERY clean car:goodjob:
Thank Pat

[csmiths]

im pretty sure i drove past you on beaver ruin today, if so that **** looks so clean

[FasTech]

Like the 240...... Real clean

[MeanMugen]

98 R34 Skyline

correction i think its an ER34 :taun:

[bluecivic]

Thank for the comment you guys.

[FoolsDrifFWD]

RB25 POWER!!!!!!!!!!!

[xclusivebean]

U dont have to worrie about 400hp on the stock rb25, the blocks are rated to 750 stock, i know travis from driftstar syndicate who drives the s13 with the rb on it and right now thats making 516 on the stock engine so ur good making them 400

[bluecivic]

U dont have to worrie about 400hp on the stock rb25, the blocks are rated to 750 stock, i know travis from driftstar syndicate who drives the s13 with the rb on it and right now thats making 516 on the stock engine so ur good making the m 400
That is good to hear. Thank Man

[xXnimbusXx]

saw this car in person. AWESOME work of art. Did the rotors I sold u work out for you?..

[xclusivebean]

yeah i've been doing some research too because im doing the same thing, quick question though are u still using u'r stock brakes or did u already upgraded them

[bluecivic]

saw this car in person. AWESOME work of art. Did the rotors I sold u work out for you?..
Yeah man work perfect. Thank for the deal