?!?!? Bucky's civic build ?!?!?

[The BUCKY]

well i am finally making the time to work on my own car. My goal is to build a clean "show" car that can demo some of the work that we do here at Superstar Customs. its not gonna have some gaudy kit or alot of bling because i dont care to win anything.

what i am working with:


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF4993.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF4996.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF4994.jpg

as you can see alot of stuff was on the car before





as it sits right now



http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5074.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5075.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5076.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5077.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5080.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF4802.jpg


here is the paint for the build:

the silver is a custom color based on kaiser silver from the NSX

interior and engine bay will be battleship grey


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF4810.jpg





this is a pic of some of the parts goin on the car


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5083.jpg


carbon hood, front lip, side skirts, valve cover, rear filler panel
nardi wood grain wheel
nrg release and hub
mugen shift knob
skunk2 vtec solenoid cover
new black carpet
titaium housing headlights
greddy timing belt
skunk 2 coilovers
17" racing hart cp10
blox LCA
Beaks lower tie bar
Buddy club camber kit F&R



things being made or on the way:

Carbon trunk, glove box, door handles,
Benan front strut tower bar
HYtech/Rage header from MR. Kidd

it will have an audio setup as i picked up T3 audio for this yr.
the box will be in the floor of the trunk and all wrapped in carbon.

i am finalizing the deal with F1spec for a set of carbon backed seats.

competition clutch is supplying me with an experimental carbon puck clutch as well so i greatly appreciate them as well.

i will take alot more pics as it goes should be a pretty quick build. month at most. first paint to spray will be the interior and then engine bay prob next week.

[greasemunkey]

pretty cool, im anxious to see how it turns out...what color you doing the cp-10's? leaving them white?

[NAIZBST]

sounds like a good build

[ARFNSX]

Kaiser Silver, I wonder where that is coming from ;-)

I love it...when are you painting it....and dont say after you get your seats

[SLOWLYbtngU]

I cant wait!!! :yay:

[KPowerEP3]

Holy hell, nice project.

[KDM>JDM]

it looked good before, i cant wait to see what its going to look like when youre done.

[00CelicaGT]

cant wait to see it completed. do u know when it will be done?

[Dirty Octopus™]

I cant wait!!! :yay:
http://i82.photobucket.com/albums/j261/Knonimous/GIFs/werd2.gif

Import Alliance here we come! :bump:


-Sofakingfresh. The Real Slim Shadys :D

[takume]

can't wait to see the finished one.

[Just_CHill]

Wow, sounds like that's going to be a sick ride! GL

[bigdare23]

What?!? The Bucky has a build thread!!!




Shut the game down homie!

[AnclyT]

nice carbon fiber lip ;)

[DC2NR]

Hurry up with the rest already ... :D jk gl. cant wait

[AnTi-PooN]

do my box in carbon!!!!!!!!!!

[Vteckidd]

Dont forget the header you bought from me :)

Bucky, i can work a deal with F1spec for you, i know them VERY well

[The BUCKY]

Dont forget the header you bought from me :)

Bucky, i can work a deal with F1spec for you, i know them VERY well



fixed

[Vuongy_Dong]

paint my name on your car FUC KER......

[The BUCKY]

ok get right on that.

[jew_boy]

nice project

cant wait to see it finished

[blacknightteg]

hell ya man

[Codeman1407]

Great build man.

[EJ_Allmota]

looks like its gonna be sick homie..

[carbongs]

i may have to stop by one day and sneak a peak! lol i also need to come strip my nitrous bottle! geesh, i have no time

[KillTheCrow]

This is going to be on nice ride. Can't wait to see it finished.

[IndianStig]

thats gonna be a nice car bucky!

do you make carbon fiber interior trim pieces? i might be buying a 5 series soon and wanna renovate the interior of it after i drop it and m replica it

[csmiths]

carbon rear lip would make that shiz look so good, well that just my opinion

[Mr. Clean]

hmm i couldnt help but noticed you attained that $600 carbon fiber valve cover...

bastard.

car will be ridiculous... cant wait to see it done. and like DO said, hopefully you'll have it done by importalliance. i hope to have something gangster to drive by then. hopefully

[Krappy]

ricer! painted interior FTL!!!! lol JK! looking good.....

[ironchef]

Seems like it might be cool, but the addition of a new clutch has me wondering. Is there so much power in that beast of a civic that you need a "experimental carbon puck clutch"?

[FasTech]

Well best of luck to ya....... G/l on the build

[The BUCKY]

hmm i couldnt help but noticed you attained that $600 carbon fiber valve cover...



yea but i sure as hell didnt pay 600 for it not even close




ricer! painted interior FTL!!!! lol JK! looking good


not painting panels. just the sheet metal under the panels. so EAD



Seems like it might be cool, but the addition of a new clutch has me wondering. Is there so much power in that beast of a civic that you need a "experimental carbon puck clutch"?


its a clutch they are wanting to start selling for close to stock cars. they asked me to test it out for them. so you can EAD also

[HachiDori]

I want more pics!

[The BUCKY]

more pics tomorrow.

[PURP]

wow... thats alot of DE...lol G/L man with the build...

[WHT_EP3]

so my bad for asking but do you mold carbon fiber parts, like do you replicate them?
just wondering and sorry if its a stupid Q.

[juan b]

should be bad ass:goodjob:

[The BUCKY]

some of the carbon it overlayed. some is not.

[boostedb16]

buy my skunk2 plug cover to go with your vtec cover.

[LS2ner]

Looks like its going to be sick man. So you decided to keep the RH's?

[rollininstyle2004]

Should look awesome when its all done man. I cant wait to see the finished product. I still need to drop off that FG tub for you to spray sometime soon.

[The BUCKY]

yea bring it by

[puregroove]

This is gonna be good...

[VickNotic]

hmm looks like a BUMBLE-B if viewed from the front.. i know this becuz my brother's got one.. and looks just like it.. :goodjob:

[FasTech]

Got any new updates?

[Jblizzard]

def. going to be watching this one

[The BUCKY]

hmm looks like a BUMBLE-B if viewed from the front.. i know this becuz my brother's got one.. and looks just like it.. :goodjob:


how does it look like a bumble bee??




more pics tomorrow. havent been in the shop this weekend

[boostedb16]

want to trade wheel's?

[Dougk1401]

So you decided to stick with the Racing Hart CP-10's??? Or still thinking about the change??

[The BUCKY]

still considering a change but not for rotas

[Timinater]

should turn out sick, ive always loved that color. your gonna keep the hood black, right?

[blackboi50]

good sh!t bucky!!!!:goodjob:......1

[The BUCKY]

yes all carbon will be unpainted. mayber a silver pearl over it. undecided yet

[mocha latte cupcake]

Bout Dang TIME! w00t w00t! Bucky one step ahead of the game! can't wait bro... Lovin those CP10's!

[The BUCKY]

JM we might have to work a deal out for your set. i am having some problems with my other set

[mocha latte cupcake]

hmm..... interesting. hit me up man holla @ me man. you know i'll work with you

[00CelicaGT]

WHERE ARE THE PICS?

[The BUCKY]

give me a min. lol. setting stuff up to paint

[TOPbmw]

Bump for a friend:) nice ride

[Halfwit]

keep telling these hos to EAD. lol nice man.

[MR.EM1]

the suspense is killing me, hope it turns out well

[The BUCKY]

ok more pics finally

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5084.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5085.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5086.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5087.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5089.jpg

carbon glove box i am making

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5091.jpg


making me a carbon trunk. i have a real carbon one but i dont think its gonna like the stereo system to much.

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5093.jpg

[FasTech]

Like the carbon glove box.... pretty neat, Can't wait to see more pictures.........

[WhiteAccord]

GOOOD WORK.

[BTLFED]

In for more pics!

[eYezs1ck]

1 clean civic

[GSRteg®]

looks like its going to turn out good

[carbon_crash]

homie deboed my glove box!! Shia is coming along nicely!

[The BUCKY]

starting to pull stuff from the bay

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5097.jpg



no more airbag

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5099.jpg



lil teaser of the color

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5101.jpg

[EJ_Allmota]

color looks good.. pulling stuff from the bay.. you doing some wire tucking??

[The BUCKY]

yep should be a full wire tuck, fuse box, battery blah blah. no ps, ac.

gonna shave the bay also.

[atl300zx]

looks awesome! keep up the good work.

[ARFNSX]

Very Very Sexy!

[Motivation]

looks great so far!

[KDM>JDM]

how much would you sell the "real" carbon trunk for? if you dont use it that is.

[boostedb16]

are you going to sell the airbag?

[Jblizzard]

its probably just me - but i think the bumper looks better without those fog light/driver light pieces there.

[rollininstyle2004]

Looks great so far Bucky. What color are the wheels going to be? You should carbon wrap the spokes.

[Crazy Asian]

I WANT THAT COLOR!!!

[carbon_crash]

are you going to sell the airbag?

If he doesnt sell his air bag, I got a pass. and drivers airbag out of my ek coupe I will sell. PM me for details:D

[The BUCKY]

i will sell the airbag. pm me an offer.

[J-ROCK]

man thats a bad a** color! gl on the build cant wait to see the outcome!

[RUFFIAN]

that should be very sick when it is all done.

[SLOWR/T]

Updates!?!?!!?! Cant wait to see this thing done!

[Dirty Octopus™]

Updates!?!?!!?! Cant wait to see this thing done!
yeaaahhh... me neither :screwy:

[carbon_crash]

more pics yo! Motor is out!

[The BUCKY]

welding!!!!






suc it




lol

[You_Wish]

nice car bucky

[Dirty Octopus™]

welding!!!!






suc it




lol
Yo Mike! did you get the memo?

feel free to toss some boat flake on the hoist there :ninja:

[The BUCKY]

Yo Mike! did you get the memo?

feel free to toss some boat flake on the hoist there :ninja:


memo got burned somewhere

[carbon_crash]

welding!!!!






suc it




lol

whore

[UpSideDownDesi]

u ricer paint the grill and fins in the bumper black.

[The BUCKY]

u ricer paint the grill and fins in the bumper black.


let me finish bit ch. :2up: :tongue1:

[FasTech]

Looking good man....... Can't wait to see the wire tuck, want to get one on my car... but don't have the first clue on how to do it or were to get it done.....

[rollininstyle2004]

Looking good man....... Can't wait to see the wire tuck, want to get one on my car... but don't have the first clue on how to do it or were to get it done.....

Well now you know where --> SuperStarCustoms. :goodjob:

Bucky YGPM

[The BUCKY]

got about half the bay shaved. take some pics laters

[SLOWR/T]

No Bitch take them now!!!!

[Alan®]

x2

[carbon_crash]

pic yo!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!



NOW!!!!!!!!!!!!!!!!!!!!!!!!

[d_day87]

cars coming along nicely. i saw the car in the parkin lot at nopi in commerce. did you make the carbon pieces under the tail lights too?

[The BUCKY]

cars coming along nicely. i saw the car in the parkin lot at nopi in commerce. did you make the carbon pieces under the tail lights too?


yea first thing i made


pics right after we pulled the motor

alot of these are for future reference

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5123.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5125.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5126.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5127.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5134.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5135.jpg



motor

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5129.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5137.jpg


after a couple hrs of shaving

all the holes were welded up first

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5140.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5141.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5142.jpg


cleaned the motor up some

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5143.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5144.jpg




rolled outside



http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5145.jpg

[00CelicaGT]

LOOKS LIKE ITS COMING LONG NICLEY +1

[csmiths]

coming along nicely, gonna look good with all that damn carbon fiber

[Mi4Daniel]

nice work bro.

[The BUCKY]

got some more parts


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5149.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5148.jpg

[The BUCKY]

mocked up

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5152.jpg


carbon trunk i made
all the red is gonna be matched to the car

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5153.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5154.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5155.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5156.jpg



carbon glove box

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5157.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5158.jpg

[smokeyj]

REAL NICE HOW LONG DID IT TAKE YOU TO MAKE THAT TRUNK

[JDMjoe]

Lookin good man!

[canadianrcis]

sick man, love the cf.

[rollininstyle2004]

Everything is looking amazing Bucky. I cant wait to see the end result. :goodjob:

[white_rice]

moarrrrr!!!!!!!!!!!!!!!!

[MR.EM1]

damn bucky u do some amazing stuff...cant wait bro. Wheres ur shop located at?? I need to get my trunk painted/bondo bc i just took off my wing.

[.:Stirfry:.]

its lookin good man:. cant wait to see that bay when its all finished up:..

[AnthonyF]

I had those rims back in the day. :goodjob:

it's gonna look sweet man! def paint the block and maybe the head or try and clean it with a bead blaster. Make that aluminum shine

[rollininstyle2004]

damn bucky u do some amazing stuff...cant wait bro. Wheres ur shop located at?? I need to get my trunk painted/bondo bc i just took off my wing.

Right near the intersection of Buford Hwy and Pleasant Hill behind the TowPro.

[juan b]

looking good:goodjob:

nice engine stand;)

[The BUCKY]

I had those rims back in the day. :goodjob:

it's gonna look sweet man! def paint the block and maybe the head or try and clean it with a bead blaster. Make that aluminum shine


plan on painting the block black along with everythign in the bay. headers will be polished i think thats about it.

[The BUCKY]

Right near the intersection of Buford Hwy and Pleasant Hill behind the TowPro.


thanks :goodjob:

[JEY$JDM]

always loved ur car bro.

cant wait to see it when ya done!

[Vuongy_Dong]

Bucky is a ricer!

[The BUCKY]

Bucky is a ricer!


:blah: :blah: :blah: :blah: :blah: :blah: :blah: :blah: :blah:

[FasTech]

once again the car is lookin' nicer and nicer, can't wait to see more pictures..........

[WhiteAccord]

:blah: :blah: :blah: :blah: :blah: :blah: :blah: :blah: :blah:

Oh you know its true.....:crazy:

[The BUCKY]

Oh you know its true.....:crazy:



not so much

[carbon_crash]

update this shia hoe!!

[Truegiant]

looks good.. glad to see that your actually having time to invest in the project. Wish you were closer and I would be bringing some stuff buy to spray.. anywho.. plus a few for you!

[Ronsam2006]

Damn this is coming along very nicely! PLease keep us posted.

[DC2girl]

looking good, especially the trunk. Can't wait to see it completely painted.

[The BUCKY]

update!!!!

dash partially in car. trying to find a spot for the fuse box

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5184.jpg



shaving done. just gotta find time to paint.

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5182.jpg


motor mocked up so i can start making the new harness :bump: :bump:

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5179.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5178.jpg

[ARFNSX]

Show Off!!!

[rollininstyle2004]

Looks beautiful bro :goodjob:

[tuyen]

gonna look good when done. i will need you to do more think to my next bike

[Oz10]

Lookin' forward to seeing the finished product! :goodjob:

[NevrNufTorq]

gonna be sweet when you're done. oh, planning on stopping by tomorrow on my way out of town :D

[Whiteboy™]

mike, i thought you got rid of that thing, lol


on a side note, lookin' good

[csmiths]

that valve cover looks awesome

[DUBSf22c]

looking better every day

[Hondizzle!]

Looking beautiful. Looks like some good work going into this car. Only thing I would like to see is the grill in the bumper painted back to black, just a pet peeve of mine. Of course its not my car to make that decision. :P

[The BUCKY]

Looking beautiful. Looks like some good work going into this car. Only thing I would like to see is the grill in the bumper painted back to black, just a pet peeve of mine. Of course its not my car to make that decision. :P


yea its deff goin back black. just havnt had the time yet. its hard to make time for the car with the shop a lil busy. but it will be done soon enough. hopefully we can get together for you to shoot it when i am done.

[Hondizzle!]

Hey Im definitely down to do that. Just let me know man. Good luck with the rest of your build btw.

[Skillet]

good sh!t

[iNsTuN nOoDoH]

Looks good, I bolted my fuse box onto the kick panel of the ecu. The engine bay going to be a lighter color than the car huh?

[The BUCKY]

nah i am just gonna color match the bay. changed my mind. i am still trying to put it in the glove box

[WillyBigNut]

lookin good

[OTG Signs]

Lookin good so far.

[bigdare23]

Hurry up Bucky!!!

[4uh8ers]

why dont you wrap your engine bay in carbon fiber!!!!

[The BUCKY]

why dont you wrap your engine bay in carbon fiber!!!!


deff dont have the time

[mocha latte cupcake]

i'm coming to see it personally this week!

[OTG Signs]

why dont you wrap your engine bay in carbon fiber!!!!

And add weight to the front end of an already front-heavy car?

[rollininstyle2004]

Saw it in person yesterday...looks gutted. Should look amazing when its all done though :)

[The BUCKY]

painted the body finally. time to start putting it back together.


some may like the engine bay some may not but its my car so suck one



and yes the shock will be removed and painted black.


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/CopyofDSCF5266.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/CopyofDSCF5267.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/CopyofDSCF5268.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/CopyofDSCF5272.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5268.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5269.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5270.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5272.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5277.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5278.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5281.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5285.jpg

[.::UNKNOWN::.]

you do amazing work truly talented

[UpSideDownDesi]

G for Gliter......G for Gay....engine bay. I knew u had a ricer hidden in you somewhere.
Please remove bolts and paint them black....tank you come agian.

[The BUCKY]

G for Gliter......G for Gay....engine bay. I knew u had a ricer hidden in you somewhere.
Please remove bolts and paint them black....tank you come agian.


Like I said suck one!!

And I have something instore for the bolts. I didn't want paint in all the threads. That's why they are there

[Mr. Clean]

good god thats some serious flake! haha... i wanna come see it in person one day... looks pretty good man... cant wait to see it all put back together...

[patrick4588]

just saw this thread for the first time. build looks sick and like its coming along pretty good.

[Dirty Octopus™]

dayum!!! this thing was just flat white yesterday!!!! :crazy:

[wantsanS14]

wow that really came a long way in no time,props man!

[Crazy Asian]

YOU HAVE TO DO MY BUMPER AGAIN YOU BASTARD!!! I WANT THAT QUALITY LOL!!!

[404 THE DC4]

DAMN NICEEEE.. Why not u call your civic "silver surfer" lol

[The BUCKY]

YOU HAVE TO DO MY BUMPER AGAIN YOU BASTARD!!! I WANT THAT QUALITY LOL!!!

bring it when you get the skirts done. i take care of you

[FasTech]

Just checked in on the build and the paint is wonderful Bro...... Can't wait to see the car come together with some ballin' parts...........lol,...... great work

[00CelicaGT]

motor looks sick wit the C/F valve cover

[Tech5]

Very nice Bucky!

[rollininstyle2004]

Damn man...looks amazing. Did you get a chance to spray my tub? I can come pick it up tomorrow if you did.

Car is looking great though, lots of flake, but since the car is silver I dont think it is too overwhelming. Great work :goodjob:

[Crazy Asian]

bring it when you get the skirts done. i take care of you

K thanks hahah I get a lot of compliments about the bumper though. LOL one girl said my car was sexy. YAAA

[boostedb16]

the car is looking better and better everytime i look in this thread.

[FasTech]

Anything new for us............

[EJ6]

seen it today...looks great keep up the awesome work

[WHT_EP3]

i cant wait to see that engine bay wow nice looking motor

[DB4LYFE ™]

wow! that motor and engine bay are goin to be mad nice together! :crazy:
good job so far cant wait to see the finish! :goodjob:

~DB4LYFE

[The BUCKY]

more pics courtesy of the D.O.

obviously not put together just mocked up to get an idea. still no motor or interior of any kind

http://i82.photobucket.com/albums/j261/Knonimous/The%20Bucky/1IMG_0670b.jpg



http://i82.photobucket.com/albums/j261/Knonimous/The%20Bucky/1IMG_0672b.jpg



http://i82.photobucket.com/albums/j261/Knonimous/The%20Bucky/1IMG_0673b.jpg



http://i82.photobucket.com/albums/j261/Knonimous/The%20Bucky/1IMG_0678b.jpg



http://i82.photobucket.com/albums/j261/Knonimous/The%20Bucky/1IMG_0679b.jpg


http://i82.photobucket.com/albums/j261/Knonimous/The%20Bucky/1IMG_0680b.jpg



http://i82.photobucket.com/albums/j261/Knonimous/The%20Bucky/1IMG_0684b.jpg



http://i82.photobucket.com/albums/j261/Knonimous/The%20Bucky/1IMG_0693b.jpg

[juan b]

:goodjob::goodjob:

looks so much better with those wheels

[MistaCee]

Damn that paint looks sweet!

[DC2NR]

Looking good.

[Tree]

clean.. love all the cf

[whitekoop]

lovin the steering wheel

[GaGen2Teg]

i like it alot nice color choice especially with the carbon

[.:Stirfry:.]

oh my..:idb:

[dkjohnson04]

this car is gonna be so nice!!!! i love your work!!

[EP3Hatch]

Sweet project. Can't wait to see the finished product.

[FasTech]

Its looking so good with those wheels, and that steering wheel is so cool..... Can't wait to see more, and once again G/L on the build.

[HachiDori]

Another noice civic coming out of atl, looks good cant wait till the finished stage!

[rhd_civic_ej]

those wheels are NOICE....but i think it would look sick with paint matched sides and lip...i know its CF, but i think it would flow better....but regardless still sick.

[GSRteg®]

Looks good

[white_rice]

=00000000000000000000000

[boostedb16]

sh!t looks good. what size wheels are those?

[FasTech]

Anything new to show us?

[4uh8ers]

And add weight to the front end of an already front-heavy car?

Because all of that carbon fiber will weigh so much and make any kind of diff?? DUMB A$$!!!!!!!!

[rojodamonkey]

lookin good bucky

[Mr. Clean]

word son... lookin good.... those wheels are much better IMO!... can't wait to see it done man... cant wait.

[boosted_nonv]

keep up the good work man

[KillTheCrow]

Im loving this thread.

[ATLTSX]

I saw the car today. Quality work. now paint my car black :) . lol

[WhiteAccord]

Very Nice, Like the rims.

[VQ35 Star]

very very nice color man. i love it.
nice to see you did all the detail work too, jams and all :D nice

very nice.

now wet sand w/ 1000, then re-clear it. then wetsand with 2000 and buff the **** out of it. that ***** would be so slick

[The BUCKY]

very very nice color man. i love it.
nice to see you did all the detail work too, jams and all :D nice

very nice.

now wet sand w/ 1000, then re-clear it. then wetsand with 2000 and buff the **** out of it. that ***** would be so slick

i sanded and buffed a lil today and it came out nice. no need to reclear

[csmiths]

looks really good, i still think a carbon fiber rear lip will make it look so hot.

[mr.koupe]

looks really good, i still think a carbon fiber rear lip will make it look so hot.

x2


sniff* & 1 other thing........

http://i108.photobucket.com/albums/n7/b18cguy/Picture037.jpg
http://i108.photobucket.com/albums/n7/b18cguy/400281995_ab7f8af566_o-1.jpg

:ninja:



looking good bucky. :goodjob:

[rollininstyle2004]

Good stuff :goodjob:

[The BUCKY]

x2


sniff* & 1 other thing........

http://i108.photobucket.com/albums/n7/b18cguy/Picture037.jpg
http://i108.photobucket.com/albums/n7/b18cguy/400281995_ab7f8af566_o-1.jpg

:ninja:



looking good bucky. :goodjob:


you dont even know how much i am considering doing this.

[mr.koupe]

:goodjob:

[BTLFED]

Are those rotas?! :(

[Crazy Asian]

NO BTFLED!!! If I can remember correctly that civic is rocking custom polished one of Sprint CPR's. I remember reading it from Super Street.

[BTLFED]

NO BTFLED!!! If I can remember correctly that civic is rocking custom polished one of Sprint CPR's. I remember reading it from Super Street.

I'm talking on Bucky's car. Why do I give a damn about a Super Street car? Bucky is the man.

[The BUCKY]

Yea they are. I am not comFortable getting the wheels I really want. 2k wheels on a civic in Gwinnett is like a flashing beacon. Believe me I want some diff wheels. But that will come later. There is a lot of stuff goin on with the shop and sick so that money is well spent in other ways

[FasTech]

I think polished rims would look good as h e l l on your with that color.

[BTLFED]

Yea they are. I am not comFortable getting the wheels I really want. 2k wheels on a civic in Gwinnett is like a flashing beacon. Believe me I want some diff wheels. But that will come later. There is a lot of stuff goin on with the shop and sick so that money is well spent in other ways

I will only excuse it if you hook me up on polishing back out the JDM 4Runner wheels I got. :tongue1:

[The BUCKY]

I will only excuse it if you hook me up on polishing back out the JDM 4Runner wheels I got. :tongue1:


lol we will see

[BTLFED]

lol we will see

I don't have anything besides a Dremel that spins fast enough to get the JDM sh!t off of them (whatever it is) and it would take me like forever and a day to polish them out with a Dremel. It comes off pretty easily with the Dremel though. They are already polished, just have some white JDM crap on them from lord knows what LOL

[boostedb16]

the car look's great but why not carbonfiber the plastic around the tag? and what size are your wheels?

[The BUCKY]

I don't have anything besides a Dremel that spins fast enough to get the JDM sh!t off of them (whatever it is) and it would take me like forever and a day to polish them out with a Dremel. It comes off pretty easily with the Dremel though. They are already polished, just have some white JDM crap on them from lord knows what LOL



lol just let me know when your ready.


i liked the way the color was thrown in there so i didnt want to carbon it. wanted something diff and the new wheels are 16

[404 THE DC4]

yo bucky. did u go to varisty tonight? I am not sure its you who i saw @ varsity

[The BUCKY]

yea i was there on the bikes. i had a blue shirt and jeans on.

[404 THE DC4]

you was standing next to nitro's car and talked to him right?

[The BUCKY]

you was standing next to nitro's car and talked to him right?



Nah I didn t see him last night

[JITB]

chrome is back!!!!!!!!!!!!!!!!

[Sammich]

x2


sniff* & 1 other thing........

http://i108.photobucket.com/albums/n7/b18cguy/Picture037.jpg
http://i108.photobucket.com/albums/n7/b18cguy/400281995_ab7f8af566_o-1.jpg

:ninja:



looking good bucky. :goodjob:

good lord thats hot...arent the first wheels bmw bottle caps

[JITB]

good lord thats hot...arent the first wheels bmw bottle caps


**** no!!

[Sammich]

lol chill homie..i thought someone polished the bottle caps or something..i mean those two wheels pictured dont look alike, they do, but they dont.

either way its butt sess

[mr.koupe]

^^ the eg's cpr's are 15" and a diff offset thats why they look different man :goodjob:

[N/A EK]

Looking good

[BTLFED]

lol just let me know when your ready.

LOL PM me a price. Money willing I'd like to get it done ASAP.

[.:Stirfry:.]

you dont even know how much i am considering doing this.


http://i62.photobucket.com/albums/h109/jdmlifestyle/5-1.jpg

[The BUCKY]

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5433.jpg


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5441.jpg



http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5445.jpg


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5447.jpg



http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5450.jpg

[NevrNufTorq]

http://i62.photobucket.com/albums/h109/jdmlifestyle/5-1.jpg
now that's just phat as hell!!!! cf door panel inserts look great

[The BUCKY]

gonna be offering the stainless fuel lines and clutch lines as a service for hondas soon. if anyone wants prices let me know.


i an do the carbon door inserts for 250 installed take about a week to complete.

[boostedb16]

is that price for both door panel's?

[mocha latte cupcake]

SuperStar Customs for the EPIC WIN!

[The BUCKY]

is that price for both door panel's?


yes both panels

[hadouken]

nice.. gl

[iNsTuN nOoDoH]

Those door panels look nice homie

[The BUCKY]

thanks

[boostedb16]

yea thats a good price for the door panel's. i hope to give you mine soon.

[The BUCKY]

no prob lmk when

[osnap]

Looking sexy. Hey Bucky... this is a bit off topic, but do you *polish* wheels by chance? I know you paint em, but I have some silver Heliums I might want to mirror polish soon. Just curious. Keep up the good work with the civic though man!

[The BUCKY]

yes i can take care of you. but your deff looking at more than what the wheels cost alone

[hadouken]

nice looks clean as hell

[tueyy]

:goodjob: clean

[The BUCKY]

some interior stuff done


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5578.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5576.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5583.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5579.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5582.jpg



fuel lines
no more filter on the fire wall
another option we are gonna be offering at SSC


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5571.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5570.jpg


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5558.jpg

http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5557.jpg



stainless clutch line.


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5559.jpg


cam gears in progress


http://i110.photobucket.com/albums/n89/csubucky19/SI%20build/DSCF5568.jpg

[VQ35 Star]

carbon fiber with the wood steering wheel. hmmm should be a interesting combo. can't wait till it's finished.

[The BUCKY]

i have a black leather nardi to install just havnt taken the time to yet

[VQ35 Star]

ah, missed that. lol that should look fire then.

[carbon_crash]

ummm, bucky, oh where did you get that idea for the carbon on the underside of the dash?? LOL!!

[Mr. Clean]

man your gonna need hella windex to keep all the finger prints off this ***** haha

[FasTech]

Looking good bro, maybe you should leave the woodgrain steering wheel it looks good with the carbon fiber

[KillTheCrow]

Damn Bucky you beat me to the cd relocation! Lol. Looks good man!

[EJ_Allmota]

not a big fan of carbon fiber, that ****s overkill..

[gen2freak]

not a big fan of carbon fiber, that ****s overkill..

x3, i know carbon fiber its cool and all , and yes light weight, but no offense, your taking it way to far. i mean you might as well just do the whole car i mean the whole car in carbon fiber!