my build...ef squad here i come!

[B_Hoov]

engine specs

h22a w/ golden eagle sleeves and LSD tranny
ARP head studs
ported and polished head
JE pistons 9:1
crower pro billet rods ( have tag )
crower 0/5mm oversize intake and exhaust valves
crower titanium springs and retainers
crower lightweight polished crank
crower beast cams ( have tag )
ferrea valve guides
skunk 2 fully adj cam gears
prodrive billet oil pump
garrett GT40R
PWR air to water intercooler
hose techniques clamps
walbro pump w/ inline
1000cc ( peak and hold ) RC PL4 injectors
golden eagle intake manifold
custom turbo manifold built by ME
aem fuel rail
aeromotive fuel pressure regulator
hondata S300
10mm spark plug wires
MSD 6AL ignition
MSD blaster SS coil
cometic head gasket
block was painted gloss black
ground kit
apexi turbo rimer
comp stage 5 clutch
synapse BOV
HKS 44mm wastegate


suspension
Skunk 2 sport springs and sleeve coil overs ( baby going to be in car and dont want a REALLY rough ride, just slightly bumpy! )
skunk 2 camber kits
skunk 2 LCA's

pictures below, my garage is VERY tiny so no hating! reps if you like!i will be needing to get some of them EF squad stickers as well, nd anyone who knows there way around an H motor and an EF help would be greatly appreciated in getting this monster set-up, dont get me wrong i could do this myself but then i would be an independent not part of a group such as the squad, this car will be NASTY when it's done, and i keep no secrets thats why pics are up!!!

[PURP]

Nice man, good luck and can't wait to see finished product

[Revmaynard]

Damn man, that's going to be sick! How much power you shooting for?

[slow_hatch]

Holy :eek: Thats going to be one hell of a ride :goodjob:

[uproot]

wow i cant wait to see this one done!

[low mileage]

going to be one sick ride there good luck on the build.

[JDMJAYDC2]

is this the setup from your accord?

[B_Hoov]

yes this is the set-up from my accord that insurance totaled out, changed a few things up and going to see ed at balanced when finished to get her tuned, my accord was running on break in tune as i never got it fully tuned, i would like to see 700hp from this one, tuned down to around 300 for daily driving and baby hauling!

[Revmaynard]

DAMN! That is gonna be a fast EF!

[B_Hoov]

got some 22" slicks on 13" steelies to, figure i would need them for the dyno atleast

[AnTi-PooN]

i hate you!!!!!!!!!!!!


j/k.. you know this battle will never end right

[B_Hoov]

i hate you!!!!!!!!!!!!


j/k.. you know this battle will never end right



yea i know, thats the beauty of it, it will only be a matter of time until someone else has a faster daily driven EF...and im okay with that... FOR NOW! lol

[mushroom_toy]

WHen you get it done you definitely gonna have to bring it to one of the meets. :) Cant wait man, bet it will be freaking baller.

[BABY J]

1) http://www.explicitspeedperformance.net/EFH22AMMK.html

2) http://www.honda-tech.com/zerothread/1646586

[B_Hoov]

got my mounts, trac bar set-up and a few other things from explicit speed!

[AnTi-PooN]

got mine from innovative...

[B_Hoov]

are you going to be able to close and use your factory hood without running spacers? thats a big reason why i chose explicit speed, lookin factory and moving like a ferrari...

[Scotsman]

are you going to be able to close and use your factory hood without running spacers? thats a big reason why i chose explicit speed, lookin factory and moving like a ferrari...do you still need those parts? i'll be home all nite

[BABY J]

Ferraris can run from a dig on street tires. LOL


Don't get me wrong, when you find traction it's gonna check outta the big end like a raped ape (on a slick and well-prepped track). But some mild B swaps (+ boost) w/ even decent power are gonna send you home pissed a lot of nights --- esp on the street. Traction - it's what's for dinner.

[B_Hoov]

got some slicks but not planning on running them daily, to the strip and maybe to certain meets etc...yea i still need them but i was laid off today so until i find something else i don't need to buy anything, i still have ordered parts that haven't arrived.

[Revmaynard]

got some slicks but not planning on running them daily, to the strip and maybe to certain meets etc...yea i still need them but i was laid off today so until i find something else i don't need to buy anything, i still have ordered parts that haven't arrived.

That sucks man, good luck with finding a job and finishing your car!

[B_Hoov]

preciate it, anyone knows of any mechanic or metal fabrication/welding openings let me know!

[boosted_nonv]

that sucks dude but good luck on the build

[FasTech]

Sucks about getting laid off, hope you find something else. But thats gonna be a badas* EF hatch, I also heard that EF's were not good cars to build for that much hp, don't know it was a question so don't kill me about it... But G/L on the build and hope to see it soon.

[sakasaku]

clean as fvCk...nice reps
u wouldnt happen to have an extra spark plug cover for h22 i need one for a friend