valvetrain for skunk2 pro3's

[eghonda88]

What springs and retainers would be best for my ls/vtec running skunk2 pro3's. Haven't purchased them yet but want to run them. Any advice from people who have used them???:thinking:

thanks in advanced

[Batlground]

Thats a big cam, Ill have to check the coil bind numbers on a few diffrent sets of springs but probably the Ferrea setup.

Matt

[eghonda88]

lol okay i called batlground late on friday to ask them about ferra valves im supposed to get a call back. you say springs and retainers too

[Batlground]

lol okay i called batlground late on friday to ask them about ferra valves im supposed to get a call back. you say springs and retainers too

Ahh yeah that was me you talked to, its hard to go wrong with the Ferrea stuff. Ill get you a qoute on both they were already closed on Friday. Talk to you around lunch time.

Matt

[EmminoDaGreat]

Use the skunk2 stuff...

[eghonda88]

Ahh yeah that was me you talked to, its hard to go wrong with the Ferrea stuff. Ill get you a qoute on both they were already closed on Friday. Talk to you around lunch time.

Matt

sounds good see about a quote for springs and retainers to run those cams please!:goodjob:
I might be routing at work and wont hear your call you can leave a message

[Batlground]

No problem, Ill check on the Skunk 2 stuff as well

[eghonda88]

Yeah i just need to know what will run the best with them considering i want this to run as long as possible and dont want my rocker arms or block to go b/c of a poor build

[Vteckidd]

you MUST use SKUNK2, an you must run their PRO series japanese CNC Springs. Ferrea will not work an neither will omni, rocket, blox, etc.

You can try but you will coil bind an wear rockers out or drop a valve.

-Love
The only guy to run PRO3s in a B series that i know of in GA

[all-mota]

if your installing the cams yourself and not checking valve to valve or valve to piston clearance then your crazy. depending on the setup the valves need to be sunk into the head and spring install height needs to be set to protect from coil bind even with skunk2's valvetrain. you can't just throw them in with the cams and expect nothing to happen.

if not we might see another i blame skunk2 for my stupidity thread pop up real soon.

my advice is to let a good machine shop or engine builder check everything for you unless you have to tools and knowledge to do it yourself.

i myself also have pro 3's and after switching from a cam around the same size before everything was checked again to make sure it was good. i.e. coil bind, spring tension at seat and spring install height.

[eghonda88]

lol thanks for help no im am not trying this build alone...i have a honda master mechanic which was one for 10years now retired working for his own. I trust him and his knowledge. Thanks for all the previous knowledgeable information!

[Mr2raceworks]

pro3, do you really need this??? I don't know your setup (besides ls/vtec), you sure you won't be over camming? all that cam, what you trying to get 240+ whp. Francisco w/ the yellow type r na drag car for password jdm runs pro1s and makes 250ish.

[JDMB20]

listen to Mr.Kidd he knows wat he is talking about he has helped me with my setup
B20/vtec build