chnco
03-26-2008, 06:20 PM
Have a project car for sale that needs some finishing work. Here are the details on the car:
1995 Nissan 240SX
155k miles on chassis
Clean title and Carfax
::Engine/Drivetrain
1987 Mustang GT 302 Motor
Motor is bored to a 306 cu/in
5k on built motor
New Cap/10mm Wires
New Starter
Custom Welded 351 Windsor Oil Pan
Shorty Mak Headers
LS1 Mid flange, y-pipe to 3" Apexi N1 Muffler
Rebuilt T5 Tranny
Spec Stage 2 Clutch
Weld Lockd V3 Diff
Apexi Intake
::Interior
Mini Steering Wheel
Push button start made
Short throw shifter
Mugen Harness for driver side
Clean Interior
Interior harness used.
::Brakes
Z32 Brakes
Brembo Drilled/slotted rotors
Braided Lines
::Misc
Working Heat
No A/C or P/S
::Exterior
Flat Black
OEM Lip
So here's what it needs to get running. The car will crank and fire, but misses due to the MAF.
-Needs clutch pedal connected to transmission, stock S14 tranny is hydraulic, T5 Mustang is Cable Type
-New MAF
-Driver side motor mount is sitting on crossmember.
The car is missing some panels from the interior (kick panels, steering column, etc). Again this is a project car, so please don't expect a perfect car. Should be an absolutly blast to drive once finished. I just too many projects right now.
Location: Kennesaw, GA 30144
Price: $4500, offers/trades welcome
Contact: e-mail me at [email protected] or AIM chnco7 or call me at 678-910-6481 for any more info.
Trades: I'm looking for really anything. Shoot me anything!
Thanks!!
Here some brief pics!
http://i41.photobucket.com/albums/e258/chnco/Picture121-1.jpg
http://i41.photobucket.com/albums/e258/chnco/Picture119.jpg
http://i41.photobucket.com/albums/e258/chnco/Picture118.jpg
http://i41.photobucket.com/albums/e258/chnco/Picture117.jpg
1995 Nissan 240SX
155k miles on chassis
Clean title and Carfax
::Engine/Drivetrain
1987 Mustang GT 302 Motor
Motor is bored to a 306 cu/in
5k on built motor
New Cap/10mm Wires
New Starter
Custom Welded 351 Windsor Oil Pan
Shorty Mak Headers
LS1 Mid flange, y-pipe to 3" Apexi N1 Muffler
Rebuilt T5 Tranny
Spec Stage 2 Clutch
Weld Lockd V3 Diff
Apexi Intake
::Interior
Mini Steering Wheel
Push button start made
Short throw shifter
Mugen Harness for driver side
Clean Interior
Interior harness used.
::Brakes
Z32 Brakes
Brembo Drilled/slotted rotors
Braided Lines
::Misc
Working Heat
No A/C or P/S
::Exterior
Flat Black
OEM Lip
So here's what it needs to get running. The car will crank and fire, but misses due to the MAF.
-Needs clutch pedal connected to transmission, stock S14 tranny is hydraulic, T5 Mustang is Cable Type
-New MAF
-Driver side motor mount is sitting on crossmember.
The car is missing some panels from the interior (kick panels, steering column, etc). Again this is a project car, so please don't expect a perfect car. Should be an absolutly blast to drive once finished. I just too many projects right now.
Location: Kennesaw, GA 30144
Price: $4500, offers/trades welcome
Contact: e-mail me at [email protected] or AIM chnco7 or call me at 678-910-6481 for any more info.
Trades: I'm looking for really anything. Shoot me anything!
Thanks!!
Here some brief pics!
http://i41.photobucket.com/albums/e258/chnco/Picture121-1.jpg
http://i41.photobucket.com/albums/e258/chnco/Picture119.jpg
http://i41.photobucket.com/albums/e258/chnco/Picture118.jpg
http://i41.photobucket.com/albums/e258/chnco/Picture117.jpg