wtb: valve adjustment tool today!

[DC2girl]

need to know where to get a valve adjustment tool. I don't feel like using an open end socket wrench. need it today. cash money

[Barefoot]

if your on the south side i got 1 u can borrow after u make a deposit on it.

[Tech5]

YOU DONT USE A OPEN END WRENCH YOU USE A CLOSED END WRENCH WITH A FLAT HEAD SCREW DRIVER

[boostedy8]

I made my own using an old deep wall socket w/ a GM style lug nut welded to the end of the socket so you can still fit a screw driver into the socket. And all you need is a 19mm wrench for the lug nut. I know on the D-series heads you can get away w/ using just a wrench but the B-series heads are a pain in the butt to adjust w/ just trying to use a wrench. I know if you bought one from the tool truck they go for around $100. Its an expensive tool, thats why I made my own.:goodjob:

[Barefoot]

I know if you bought one from the tool truck they go for around $100.
what snap on is like like 50 bux ebay like 25

[boostedy8]

Well they might be now. But when I needed one they were expensive. But for that tool, I would rather make my own for next to nothing. To each is own.

[green91]

Well they might be now. But when I needed one they were expensive. But for that tool, I would rather make my own for next to nothing. To each is own.

you are from gainesvegas? you should come out to the meets, ive never seen you around before.