View Full Version : wtb: valve adjustment tool today!
DC2girl
03-15-2008, 12:11 PM
need to know where to get a valve adjustment tool. I don't feel like using an open end socket wrench. need it today. cash money
Barefoot
03-15-2008, 01:40 PM
if your on the south side i got 1 u can borrow after u make a deposit on it.
Tech5
03-15-2008, 04:35 PM
YOU DONT USE A OPEN END WRENCH YOU USE A CLOSED END WRENCH WITH A FLAT HEAD SCREW DRIVER
boostedy8
03-16-2008, 12:06 PM
I made my own using an old deep wall socket w/ a GM style lug nut welded to the end of the socket so you can still fit a screw driver into the socket. And all you need is a 19mm wrench for the lug nut. I know on the D-series heads you can get away w/ using just a wrench but the B-series heads are a pain in the butt to adjust w/ just trying to use a wrench. I know if you bought one from the tool truck they go for around $100. Its an expensive tool, thats why I made my own.:goodjob:
Barefoot
03-16-2008, 01:29 PM
I know if you bought one from the tool truck they go for around $100.
what snap on is like like 50 bux ebay like 25
boostedy8
03-16-2008, 06:32 PM
Well they might be now. But when I needed one they were expensive. But for that tool, I would rather make my own for next to nothing. To each is own.
green91
03-16-2008, 06:45 PM
Well they might be now. But when I needed one they were expensive. But for that tool, I would rather make my own for next to nothing. To each is own.
you are from gainesvegas? you should come out to the meets, ive never seen you around before.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.