Log in

View Full Version : FS: SOHC Vtec Head(EX Civic) - Y8 high comp. Machined head. - $225


JDMirza
03-12-2008, 08:44 PM
http://images.craigslist.org/0101080102010116022008020385fec0840e55f4c0620054b3 .jpg

Sort of got into a little accident with my car, and now I am deciding to get rid of it. So I am parting it out, and then probably selling it and getting me something else.

What you see I have a vtec sohc head from a ex 2000 civic with the vtec pressure switch, and has been machined at downtown lawrenceville. I have the receit to prove to you that it's been machined(valve job) and I have also adjusted the valves with intake being .20 clearance, and .25 exhaust clearance. Which is Hondas Original OEM principle. I will also add a Intake manifold and Fuel rail to the person that purchases it. With the throttle body, and vacuume lines. I will include some brand new out of the box spark plugs with this too. NGK's ofcourse, that is.

$225
SiLkY_JohnSon
03-12-2008, 09:47 PM
Let me have it for Free mirza put it on the eg4
SiLkY_JohnSon
03-12-2008, 09:50 PM
Just for a lil while
hondachick22
03-12-2008, 09:53 PM
what all has been (machined) on it.
SleeperWRX
03-12-2008, 10:28 PM
I have also adjusted the valves with intake being .20 clearance, and .25 exhaust clearance.

LOL .20 over is how the head comes what did u adjust
JDMirza
03-13-2008, 05:43 AM
Just for a lil while

Ehhhh. No Sir.
JDMirza
03-13-2008, 05:44 AM
what all has been (machined) on it.

Just the exhaust and intake.
JDMirza
03-13-2008, 05:46 AM
LOL .20 over is how the head comes what did u adjust

Okay, first of all when the head comes out of a shop usually the motherfuker that puts in the valves back in when he machines it does not give a **** about how tight or loose the valves are. That is why I reset them back to standard clearance.
SiLkY_JohnSon
03-13-2008, 09:43 AM
Ehhhh. No Sir.

Its cool to be you Mirza.......
JDMef88
03-13-2008, 02:33 PM
what is the advantage in hp over a stocky y8? Is there gonna be a noticable difference?simple question no flaming is needed...
JDMirza
03-13-2008, 06:31 PM
what is the advantage in hp over a stocky y8? Is there gonna be a noticable difference?simple question no flaming is needed...
I did some research and it says my compression was suppose to be set at 10.6 if I put this head on my a6 block.
hondachick22
03-13-2008, 07:15 PM
Just the exhaust and intake.what do u mean regrinded valves or what ?
JDMirza
03-13-2008, 07:49 PM
what do u mean regrinded valves or what ?

Im sorry, the seats and guides were refurbished basically a valve job. Didn't have any oil burning in the past or anything, just felt like it was necessary for me to perform one in order to restore compression for my new setup. But I ran into some problems.
scrxils
03-13-2008, 08:05 PM
good luck man
JDMirza
03-13-2008, 08:25 PM
good luck man
Thanks dude, night bump.
streeteg
03-13-2008, 09:45 PM
interested pm me
N/A EK
03-13-2008, 11:01 PM
its sold!!!