oil pan tightning

[blackhatch99]

all right guys i have installed everything for the turbo and found out my morso oil pan was leaking so i took wat a had to take off and tightened the bolts agian but leaked worse than before so my friend siad that if u overtighten it will leak and if u dont tighten enough it will leak so how do u determine if the bolts are to tight or to loose thanks for the help!!!!!

ist 2000 honda civic si

[Barefoot]

tq to 107 in. lbs

[blackhatch99]

i dont have a torque rachet

[EmminoDaGreat]

fu ck moroso oil pans.

[Barefoot]

hand tight pretty much without killing it

[NAIZBST]

fu ck moroso oil pans.


I agree, I had it on my old integra and it always leaked...piece of crap

[blackhatch99]

its not just leaking if i put put it on jack stands it like poors out i dont care if it had a small leak i could deal with that

[southside]

honda bond it and torque to 10 pounds if you dont have a torque wrench do it bye hand and snug it dont kill it.

[NAIZBST]

its not just leaking if i put put it on jack stands it like poors out i dont care if it had a small leak i could deal with that

well if it pours out then I would get a new gasket and hand tighten


my moroso just constantly leaked little by little...not worth the headache

[changaroo]

is it that hard to buy a torque wrench?

[southside]

is it that hard to buy a torque wrench?lol yes dont invest in walmart brand either.They will break

[Barefoot]

lol yes dont invest in walmart brand either.They will break
yup. pretty much if they are even close to calibrated right. they will work break before u get it home.

[blackhatch99]

thank guys

[mitch lab]

7.2 lbf/ft

[iNsTuN nOoDoH]

My Moroso leaks. I thought I was just special. I use teflon tape haha

[blackhatch99]

i gigured it ou thanks for the help the gasket slipped off the back studs and thats y it leaked but there is no more leaks now