PDA

View Full Version : Handling Mods Prelude Camber Kit... Whats the difference?


DaMaGe ZWK
03-08-2008, 02:00 PM
I found a Progress Front Ball Joint Alignment Kit #51.1011 for 90-97 Accord and 97-01 Prelude SH (+ or -1.0degree) for a really good price, the only thing is that I have the 97-01 suspension but not SH... will the SH ball joint kit work on the regular prelude suspension? What is the difference between the 2?
HatchHero
03-08-2008, 02:16 PM
good question... dont know if the atts might play a role in it..but if not it should be the same. if it works on 90-97 accord it should bolt rite up
DaMaGe ZWK
03-08-2008, 02:22 PM
good question... dont know if the atts might play a role in it..but if not it should be the same. if it works on 90-97 accord it should bolt rite up
exactly what i was thinking
HatchHero
03-08-2008, 02:24 PM
LMK!!
DaMaGe ZWK
03-10-2008, 01:33 PM
??
Ludester
03-10-2008, 07:28 PM
it will be fine...
DaMaGe ZWK
03-15-2008, 08:35 AM
it will be fine...
you really think it will work?
DaMaGe ZWK
03-21-2008, 08:22 AM
up
DaMaGe ZWK
03-26-2008, 08:52 AM
up
.blank cd
03-28-2008, 03:01 PM
The only thing that distinguishes the SH from any other 5th gen prelude is ATTS. The 5th gen accord and the 4th gen preludes however share almost the exact same front suspension with the exception of strut mounts
EmminoDaGreat
03-28-2008, 03:38 PM
The Prelude SH's also have a different style cradle, that the front motor mount bolts to. Non SH's have a setup like accords, Sh's use different types of traction arms, that use a double ball joint. (lower) I would say the uppers are similar though.