Fat Piggy vs. Skinny Chicken

[On_Her_Face]

Collins and I after the varsity decided to head down to Mexico and do a few runs..


http://img.photobucket.com/albums/v632/meganneu/safari_farm_fat_pig.jpg
VS.
http://i156.photobucket.com/albums/t29/lilraggagal/chicken.gif

1st run was a 60 roll:

I honked 3 times and took off, however i took too much of a jump so i just left off the gas

2nd another 60 roll:

I honked 3 times again we were about dead even till about 95~mph and up to 120 i decided to let off

3rd run was a 40 roll:

Honked 3 times again and collins pulled me by about a nose up to about 75-80~ mph then i slowly (yet surely) started to pull a car up to 120 again

good runs, hope to go to mexico again in a few weeks with him

Ls2_Kid: stock

Collins: I/H/E

:goodjob:

edit: btw lol @ the chicken

[TIGERJC]

good job chicken

[On_Her_Face]

good job chicken

i think the piggy will take me next time :(

[OnURleft]

Dosn't collins drive a fat.......

http://i11.photobucket.com/albums/a154/foodhoe/aug07/goat.jpg

[On_Her_Face]

Dosn't collins drive a fat.......

http://i11.photobucket.com/albums/a154/foodhoe/aug07/goat.jpg

i call it "teh pig"

but in all seriousness it was fun, especially the 40 roll, btw collins your car sounded good man

[DirtyMechanic]

When did the flying fcuk did this happen...? i dont remember driving down to mexico....? or was this after i made a left at NYC?

[On_Her_Face]

When did the flying fcuk did this happen...? i dont remember driving down to mexico....? or was this after i made a left at NYC?

after you headed to NYC

[DirtyMechanic]

after you headed to NYC ahh... good news upper east side was kicking tonight.

[collins]

btw collins your car sounded good man thanks bro! and good runs! like is said, gimmie about a week and a half-2 weeks, she'll be retuned so she's not running so rich and/or pulling timing. she should be a whole different animal :)

mike, how was nyc? a little colder, i hear?

[collins]

haha oh yeah... :lmfao: @ the title of this thread!

[DirtyMechanic]

thanks bro! and good runs! like is said, gimmie about a week and a half-2 weeks, she'll be retuned so she's not running so rich and/or pulling timing. she should be a whole different animal :)

mike, how was nyc? a little colder, i hear? eh not to bad. i was inside the good ole penthouse sipping back some cyrstal.


i dont see how its pulling timing if your rich. you much pushing the timing to the edge if you rich and pulling timing...

[On_Her_Face]

thanks bro! and good runs! like is said, gimmie about a week and a half-2 weeks, she'll be retuned so she's not running so rich and/or pulling timing. she should be a whole different animal :)

mike, how was nyc? a little colder, i hear?

thats why we're going to have to go to a higher mph to give me a chance haha

[collins]

well, teh afr's all jacked up... i'm not exactly sure where its rich and where its lean, but you can feel it retard teh timing just for a second, then it'll go back to normal... i think it just might be running rich down low... not sure... i dont remember the dyno chart, as we didn't print it out.

[DirtyMechanic]

well, teh afr's all jacked up... i'm not exactly sure where its rich and where its lean, but you can feel it retard teh timing just for a second, then it'll go back to normal... i think it just might be running rich down low... not sure... i dont remember the dyno chart, as we didn't print it out. gothchick says " ok im getting confused about your numbers. post up so dynos so i know your telling the true."... lol wtf.... lol jkhttp://i250.photobucket.com/albums/gg247/DirtyMechanic_album/ninja.gif

[collins]

HAHAHAAH ok, gothchick! :lmfao:




j/k.... just cause u got long hairs, i shouldnt call you names...

[DirtyMechanic]

HAHAHAAH ok, gothchick! :lmfao:




j/k.... just cause u got long hairs, i shouldnt call you names...:sicks:

[collins]

LOL... tru... that was a low blow... i'm sorry mike :taun:

[onebadgt]

sounds like good runs guys congrats, whenever i eventually get my car back id like to do some runs with you guys, they would all be pretty good i assume.

[On_Her_Face]

sounds like good runs guys congrats, whenever i eventually get my car back id like to do some runs with you guys, they would all be pretty good i assume.

wouldn't you pretty much walk me and collins up and down the highway?

[onebadgt]

wouldn't you pretty much walk me and collins up and down the highway?

na, my car weighs a ton and my clutch is startin to slip :no: so im only runnin 8psi out of my bolt-ons, i do make more pwr but with all considered i think it will still be pretty good runs:goodjob:

[mocha latte cupcake]

come on coleen i got 2 words for ya..... GOAT.....Balls.... DO EET! good run can't wait to see the newness!

[collins]

lol.... in good time, sir... in good time...

ps... ur other sig was funnier

[mocha latte cupcake]

i can see the future... billy beware teh coleen stalks from the darkness
http://bitacoreando.com/uploads/soon.jpg

ps: I nah, I nah, but i just <3 this picture

[collins]

:lmfao: oh dear lord!

[TS240]

http://i156.photobucket.com/albums/t29/lilraggagal/chicken.gif
"El Diablo" "Thats awsome, what does it mean?" "Fighting Chicken"

Nice runs guys!


I wanna see a vid of the rematch in a few weeks.:D

[collins]

i'm sure there will be. i just cant wait for my car to not be running like sh.t anymore!

[1SLWPOS]

I want in next time you guys run should be fun ;) My car might be done next week woot!!! Should be alot closer to 400whp ;)

[collins]

in a ???

[1SLWPOS]

Crappy POS 240SX

[collins]

lol if you're close to 400rwhp in a 240, u should definatly pull on me... probably billy too... hell i'll be REAL lucky if i can even hit the number in my sig again. ;) the added weight of the ls7 clutch robbed a few ponies from me...

but hell, i dont care... hahah at least i wont be the slowest! :taun:

[1SLWPOS]

Well we will see last time I made 330whp and 315tq but then it blew up so it's at the machine shop. I have 272 cams now port polished head valve springs and retainers and a few other things. So i am hoping it will make a good bit more power until the clutch breaks the tranny ^.^

[collins]

tru tru... when i was down in orlando, i ran a 300+ whp s14 and it was a good run... but that was before the new clutch, so it might've been slipping a little bit... who knows... come on out and we'll have some fun!

[1SLWPOS]

I will......waiting for the metal head gasket still. It should be in I think on the 12th so I am hoping the car will be done late next week.

[On_Her_Face]

400 whp 240 should walk us

[DirtyMechanic]

I will......waiting for the metal head gasket still. It should be in I think on the 12th so I am hoping the car will be done late next week.http://www.importatlanta.com/forums/showthread.php?t=161654 you should come out then if its running by then.

[collins]

lol i guess we'll find out how close to 400 he really is ;)

[DirtyMechanic]

lol i guess we'll find out how close to 400 he really is ;)when you going... i want to come...

[collins]

not until after retuning. you know this.

[DirtyMechanic]

not until after retuning. you know this. yes but i want to come when you get retuned silly. read english much...?:thinking:

[collins]

u wanna watch it get retuned? :thinking:

[DirtyMechanic]

u wanna watch it get retuned? :thinking:well i want to see where this "place" is and whatnot... its not like i have anything else to do. and what are you doing. why are you working...?

[1SLWPOS]

LoL we will see I hope for those numbers since I made 330 before but who knows I might make less but I doubt that. 2700lb S13 at 330whp was pretty quick for the day it drove ^.^

[jayjaySTI]

lol at the chicken really close runs

[DirtyMechanic]

so why did the chicken cross the road...?

[GirlieZ]

damn jesus you must be bored. and doesnt jesus know all the answers?

[DirtyMechanic]

damn jesus you must be bored. and doesnt jesus know all the answers?http://i250.photobucket.com/albums/gg247/DirtyMechanic_album/ninja.gif

[GirlieZ]

so your saying jesus is a sneaky ninja. i mean today, friday? they day where i cant eat meat?

[collins]

wtf? y cant u eat meat?

[DirtyMechanic]

wtf? y cant u eat meat? freaks.... :lmfao:

[GirlieZ]

wtf? y cant u eat meat?
even if you where in pa, its lent dumbass....you know cathloics cant eat meat on fridays....hoozers


and jesus you should know this

[AnthonyF]

When did the flying fcuk did this happen...? i dont remember driving down to mexico....? or was this after i made a left at NYC?lolol ur one goofy s.o.b.

[LEAVINU]

Well we will see last time I made 330whp and 315tq but then it blew up so it's at the machine shop. I have 272 cams now port polished head valve springs and retainers and a few other things. So i am hoping it will make a good bit more power until the clutch breaks the tranny ^.^

Is this in a S13?

If you added 272 cams and were already at 330 I say you will be pulling those LS2 cars. Assuming you have a decent size turbo on the car as well of course.

Ask me how I know this.;)

[LEAVINU]

the added weight of the ls7 clutch robbed a few ponies from me...



:eek: Please tell me you are just pulling someones chain. Why is your tune off now? You got it tuned and never changed anything else right? or is there a :ninja: behind the whacky tune.

:thinking:

[LEAVINU]

LoL we will see I hope for those numbers since I made 330 before but who knows I might make less but I doubt that. 2700lb S13 at 330whp was pretty quick for the day it drove ^.^


just confirmed my theory.

I cant sit back and let a car similar to my old setup rape on lil ol LS2 motors. So when you have this run b/t the GTO and LS2 kid give me a call. I'll show you what a LS2 can do.:D

[DamnDisLaOsBoY]

how much power does a stock LS2 push out?

[collins]

stock, 400 crank so approx 350ish to tje tires, depending on break in and transmission

[SicStang03]

So, how was the weather? Gotta watch for potholes the size of cows in Mexico

[Ronsam2006]

Damn sounds like yall had some great runs!

[collins]

:eek: Please tell me you are just pulling someones chain.
not at all. the car's down about 15 from where the tune was, and i want it back :) the ls7 clutch assembly is HEAVY man!

[DirtyMechanic]

not at all. the car's down about 15 from where the tune was, and i want it back :) the ls7 clutch assembly is HEAVY man! a few rotational lbs isnt going to knock 15hp off. i think its the crazy timing you got since its pulling it. timing is power you know...

[collins]

tis tru... i dunno, eli messed with a couple parameters trying to regain some stuff... i cant explain it, i dont know what else happened... all i know is last time he tuned it, it left with the numbers in my sig, and when we did the dyno pull after teh clutch install it was sitting right around the 375 mark. i have felt it pull a little timing a couple times, i'm going to have him look into that as well. as long as he can get it close to what it was before, i'll be happy

[DirtyMechanic]

tis tru... i dunno, eli messed with a couple parameters trying to regain some stuff... i cant explain it, i dont know what else happened... all i know is last time he tuned it, it left with the numbers in my sig, and when we did the dyno pull after teh clutch install it was sitting right around the 375 mark. i have felt it pull a little timing a couple times, i'm going to have him look into that as well. as long as he can get it close to what it was before, i'll be happy i think your on the timing threshold have. did you let any time for clutch break in. or did you just put it in and then strap in down you might have been slipping. but the timing issue seems like your on the edge. id take it down a half degree or maybe 1 and check the egts high timing=high egts

[collins]

well we slapped it on there right after the install. being a factory clutch made for the z06, it doesnt need that much of a break in period, so taking it up in the rpm range should be ok... just no hard high rpm shifts for a few hundred miles... getting up there should be ok. but i guess its a possibility none the less... we'll see when it gets retuned. the clutch is good and broken in now, so if it WAS slipping, it wont be now. we shall see :)

[GirlieZ]

tis tru... i dunno, eli messed with a couple parameters trying to regain some stuff... i cant explain it, i dont know what else happened... all i know is last time he tuned it, it left with the numbers in my sig, and when we did the dyno pull after teh clutch install it was sitting right around the 375 mark. i have felt it pull a little timing a couple times, i'm going to have him look into that as well. as long as he can get it close to what it was before, i'll be happy
im pretty sure he just messed with AFR, he was only on the fuel map....

[collins]

whats ur point? i said he messed with a couple things... not a full retune...

[DirtyMechanic]

whats ur point? i said he messed with a couple things... not a full retune... :ninja: excuses excuses:blah: :blah: http://i250.photobucket.com/albums/gg247/DirtyMechanic_album/ninja.gif jk lol