FS: B-Series Ported Heads, Block, Tranny w/LSD, TB’s, Manifolds & A LOT MORE LOOK!!

[2K_GSR]

Alright my civic just got totaled so I want to sell everything I have because I doubt I’ll be getting back into Hondas any time soon. I first had a gsr swapped into my 98 Civic. The block began to knock so I swapped in a LS. 2 weeks later the car was ran off the road by a FedEx truck so the car is gone, along with most of the swap. These are the parts I have left over after years of modding. I am accepting all reasonable offers which is why everything says OBO. Additional pics can be taken upon request. Parts are located in Gwinnett, I live in ATL so I am only available to meet up with stuff on Friday evenings and Saturdays. I will only ship smaller items so that means no heads, block, tranny, axles, shift linkage, etc are available for shipping, for now. E-mail or PM me with any questions or comments. Also you can check my 100% Feedback on Ebay, username is 2k_gsr there also. Thanks for looking!!

GSR P72 Ported Head w/ Valvetrain - $650
ARP GSR Headstuds - $60
70mm RPM GSR Throttle Body - $150
OEM LS Header - $30
2 OEM GSR Intake Manifolds - $40 each
OEM GSR Throttle Body- $50
LS Distributor w/ MSD Distributor Cap & Wires - $125
GSR Valve Cover - $50
P30 AC Bracket - $50
OBDII P72 GSR ECU -$125
OBDII P75 LS ECU -$75
LS Axles - offer
O2 Sensor - $25
O2 Simulator - $40
Power Steering Pumps - $50
AC Compressors - $50
98 OEM Civic Taillights - $40
Misc. hoses and bolts and mounts

ALL PRICES ARE OBO! ACCEPTING OFFERS!
ALL PICS CAN BE FOUND HERE: http://s22.photobucket.com/albums/b310/xtremeplaya04/Civic%20pics/Parts%20FS/

[RandomGuy]

vouch for seller, dont remove

[2K_GSR]

vouch for seller, dont remove
Thanks man!

[six7teen]

good stuff bump!

[kaotickaozpunk]

you know the only thing is sooner or later someone is going to mention " you have to post pics on here not a link" but good luck though im thinking about getting that DFE gsr head from you..its complete right? i mean all internals...oh and this is not a sarcasm statement...cause i really dont care if you have pix on here or there...just as long you got some somewhere..

[2K_GSR]

there are a lot of pics of the DFE head in the link butyeah i guess i ll upload the same pics to IA, its just a lot of uploading cuz i have upwards of 50 pics which isnt much when i can only attach 5 pics per post lol. i ll upload pics of the higher priced items if that ll help me not get this thread deleted. the dfe head has the full valvetrain but no cams, IM, dizzy, etc. i do have those seperate though so im sure we can make a deal if you really are interested. Thanks for the tips though! Later

Shawn

[kaotickaozpunk]

+ reps...no problem dude..but yea im interested..im just hoping i can some cash in time for it before someone gets it..but ill let you know..as of right now..99.9% want it but .1% no money..hahha..but ill keep you updated...but any ways can you give me the description of whats been done to it..like valve size...what the valve springs rated to rev to etc...thanks.

[2K_GSR]

+ reps...no problem dude..but yea im interested..im just hoping i can some cash in time for it before someone gets it..but ill let you know..as of right now..99.9% want it but .1% no money..hahha..but ill keep you updated...but any ways can you give me the description of whats been done to it..like valve size...what the valve springs rated to rev to etc...thanks.

you know man im not even sure about all that lol. i ve had it sittin in my closet for a while, i got it from vteckidd when he built my gsr NA. all i have written about it is it is a DFE Ported Head with Rocket Valvetrain and Omnipower Valves. I was suppose to run Rocket M22 cams with it but reverted back to stock, which is why i have 2 gsr heads. Im sure Mike remembers this head and can vouch for it. as for valve size and valvespring ratings i dont want to BS like i know cuz i dont have the slightest clue anymore. sorry i dont have much info but i would be glad to meet up if you just want to check it out to see for yourself. just let me know, Thanks. Later

Shawn

[Batlground]

his stock block GSR made 185whp with this head and a SMSP header like 4 years ago.

The DFE Head has:
Standard Size High Compression Valves From Omnipower
ROcket Motorsports Gen 1 Springs/Ret
DFE $1000 port job and new valve guides, seats

The head is prob really worth close to $1500, so this is a steal.

if i were building another motor id get the head for myself.

[2K_GSR]

his stock block GSR made 185whp with this head and a SMSP header like 4 years ago.

The DFE Head has:
Standard Size High Compression Valves From Omnipower
ROcket Motorsports Gen 1 Springs/Ret
DFE $1000 port job and new valve guides, seats

The head is prob really worth close to $1500, so this is a steal.

if i were building another motor id get the head for myself.

Thanks Mike! I knew you'd come through haha

[Init2winit]

Who ported the head? It looks like they used a saws-all.

[2K_GSR]

Who ported the head? It looks like they used a saws-all.

which head? cuz if your referring to the new one look at vteckidds post a few posts up. Thanks

[Init2winit]

A $1000 port job? The runners are wavy and uneven, and the ridges are still around the valves in the combustion chamber.

[Init2winit]

which head? cuz if your referring to the new one look at vteckidds post a few posts up. ThanksWhichever one you have pictures of. Sorry man, but you got ripped big time on that head.

[2K_GSR]

Sorry man, but you got ripped big time on that head.
its cool man, dont be sorry, just move along. Thanks :)

Shawn

[kaotickaozpunk]

yea dude i wouldnt mind meeting up with you to check that mug out..can you meet me at discover mills..if you can thanks lmk..just pm me...

[2K_GSR]

yea dude i wouldnt mind meeting up with you to check that mug out..can you meet me at discover mills..if you can thanks lmk..just pm me...

pm'ed ya!

[Batlground]

Whichever one you have pictures of. Sorry man, but you got ripped big time on that head.
No offense to you, an i know you know your stuff.

this head flowed 290cfms.

Don has been porting heads for 30 years. He builds 300whp NA 2.0l Honda engines. He built my 240whp LSVTEC .

Every motor he has built for my customers has SET RECORDS or made killer power.

the head is HAND PORTED. Its dissasembled and cleaned then reassembled after porting. I challenege ANYONE IN ATLANTA to flow bench this head versus ANY HAND PORTED HEAD IN ATLANTA against this head. IF YOU OUT FLOW IT, ILL GIVE YOU $100

The head is ported by one of the most respected and knowledgeable engine builders in the COUNTRY.

I will put my name behind it. An that counts for alot . ;)

[Batlground]

http://honda-tech.com/zerothread?id=2190138&page=1
http://honda-tech.com/zerothread?id=1239144
http://honda-tech.com/zerothread?id=1256186
http://honda-tech.com/zerothread?id=965320
http://honda-tech.com/zerothread?id=1987610
http://honda-tech.com/zerothread?id=1568113
http://honda-tech.com/zerothread?id=1220100

Thats just a handfull of threads on HT praising Don. If Jim Justice, Skunk2, SMSP, King Motorsports reccomend him, he must be doing something right.

[Init2winit]

I just know what I'm looking at in the pics. Maybe he put up the wrong pics, I don't know? That is not quality work by far. There are so many different areas in the runners and the combustion chambers (which weren't even touched) for improvement. If that head actually flowed 290, I'll bet I can get at least another 20-30 cfm out if it.

[Uptown401]

PM

[Batlground]

I just know what I'm looking at in the pics. Maybe he put up the wrong pics, I don't know? That is not quality work by far. There are so many different areas in the runners and the combustion chambers (which weren't even touched) for improvement. If that head actually flowed 290, I'll bet I can get at least another 20-30 cfm out if it.
v8 isnt the same as honda :D

How many honda heads have you ported? what have they made on dynos? To criticize someone like Don, these are questions that must be answered.

I have no doubt you no what to do when it comes to V8s an such, honda is different.

there are million dollar race teams that cant get 320cfms out of a B series head.

Ever heard of RLZ?

[Batlground]

for Reference:

RLZ who is regarded as one of the best if not THE BEST honda head ported in the country, flow tested a stock ITR head, then ported the head and reflowed it.

http://www.we-todd-did-racing.com/files/1003034_8rsdo/type-rflowsheet.jpg

Thats to put into perspective how good this head is.

[Init2winit]

v8 isnt the same as honda :D

How many honda heads have you ported? what have they made on dynos? To criticize someone like Don, these are questions that must be answered.

I have no doubt you no what to do when it comes to V8s an such, honda is different.

there are million dollar race teams that cant get 320cfms out of a B series head.

Ever heard of RLZ?I've done dozens of honda heads. I'll bet anything that the head he has pictured will not flow 290 on my flow bench. Matter of fact, I will pay whomever brings me that head pictured $100 if it comes within 10cfm of 290. I'll even flow it on whatever size bore plate and tube you want. As far as dynos go, I don't have a clue. I make sure the air/fuel is right, and I tune at the track. The fastest cars I've built have never seen a dyno.

[Init2winit]

I will also bet $100 that the runners don't even have the same volume. We can even cc them.

[Batlground]

what track times have your all motor cars ran?

Honda wise, if it aint 11s, i dont want to hear it :D

your entitled to your opinion, maybe you should start porting more heads for honda guys locally.

Ill take your bet but ill send it to RLZ an have him to the test. :cheers:

[2K_GSR]

i'll admit i suck at taking pics if that helps any :)

[Init2winit]

The last one I built was a full weight integra gsr. It went consistent 12.10s. Stock short block, a little cutting on the head, custom ground cams. Nothing really fancy.

[Batlground]

The last one I built was a full weight integra gsr. It went consistent 12.10s. Stock short block, a little cutting on the head, custom ground cams. Nothing really fancy.
is he local?

Full weight GSR running that time means he was in the 220-230whp range. On a stock block, i dont think so. If he is, i know him. No one makes that power without me knowing it.

BTW 2200lb CRX and EGs run 11.7-11.9 with 220-230whp with built 2.0L.

you are telling me that a full weight 2600-2700lb INTEGRA with a STOCK block ran 12.10s? Thats really hard to swallow, if its true, sign him up for all the NA races this year, he will beat everyone.

Whats his name? trap speed? Final Drive?

maybe with a 100 shot of nitrous :crazy:

maybe you meant 13.10

[Init2winit]

Its one of my old cars. Its been parted out since then. I can't remember the trap speeds. Hell, its been a few years back. It had a stock gsr trans, and was on bfg drag radials as well.

[Batlground]

Init2winit, ill talk with you more in person, lets not ruin this guys thread.

Where do you port heads at? PM me

[silversol]

The last one I built was a full weight integra gsr. It went consistent 12.10s. Stock short block, a little cutting on the head, custom ground cams. Nothing really fancy.
12.10! :eek: :eek: :eek:

[dELfONiK]

DonF is the man! Bump for a dope head!

[NAIZBST]

DonF is the man! Bump for a dope head!

:werd:

[kaotickaozpunk]

damn it shut the hell up already..hahah i might get the head...and besides if i was to add in, i think "the old one", from endyne or endyne in general does some of the best work on honda heads well i say building honda motors ftw..besides that ill admit too rlz **** is pretty freakin good too..so Init2winit ill take a look at the head and let you know about quality but if you can do better jobs then prove it....but from what ive heard about DFE there not too bad... pretty good **** but im just going to get this head because its worth a shot and price too..

[SpooL'DGsR]

you have a pm !! please respond asap !

[Reaper-D]

good stuff bump.

[2K_GSR]

good stuff bump.
thanks!

[civicracer5000]

back on the sales
what weight is that flywheel?

[2K_GSR]

back on the sales
what weight is that flywheel?
im about to unbolt it off the clutch and weight it right now since i dont remember exactly how much it weights. Let ya know soon, Thanks!

[Scotsman]

seats are for?

[2K_GSR]

seats are for?

umm what seats? i ve got some stock civic seats under my deck that ll need to be cleaned up but those are the only seats i have for sale (but didnt post them in this thread)

[PawnShopCEO]

no aftermarket b series mounts?

[2K_GSR]

no aftermarket b series mounts?
nope, sorry

[2K_GSR]

bump! oh yeah did someone from here call me at 1am?! i was in a movie but next time leave vmail!

[VickNotic]

you take $150 for the dizzy & fidanza flywheel? 2nite?? lkm

[2K_GSR]

you take $150 for the dizzy & fidanza flywheel? 2nite?? lkm

pm'd u back!

[PawnShopCEO]

600 on the trans?

[2K_GSR]

600 on the trans?
sorry mayne, if it didnt have a LSD then that would be fair but with it its def worth more. Thanks anyways though!

[ThEGrNGoBLiN]

Pm'd

[2K_GSR]

weekends comin...lets make some deals!

[2K_GSR]

DFE Head sale pending....

[2K_GSR]

DFE HEAD SOLD!! tranny and block sales are pending...

[Reaper-D]

how much for just the lsd tranny?

[2K_GSR]

how much for just the lsd tranny?
i ve got someone to pick it up tomorrow, i ll let ya know if he doesnt come through, Thanks!

[2K_GSR]

stilllllll accepting offers...halfway decent ones anyways :)

[2K_GSR]

fidanza flywheel/competition clutch sold!

[2K_GSR]

tranny sold! plenty left though!

[B20brid]

Give me a call on the throttle body 678-859-0126 Thanks

[2K_GSR]

Give me a call on the throttle body 678-859-0126 Thanks

pm'ed ya

[2K_GSR]

block and ls harness sold!

[xdavidscenex]

whats the condition on the arp gsr headstuds? and where are you located?

[2K_GSR]

whats the condition on the arp gsr headstuds? and where are you located?

they are in excellent condition. only used for about 5k miles, still look brand new. im located in gwinnett fri-sun and in atlanta mon-thurs...

[xdavidscenex]

pm'd

[2K_GSR]

bump it up!

[RiDinDurRty]

got $40 for the gsr valve cover?

[2K_GSR]

weekend bump! 4evasmashin still want the VC?

[EK Hotch]

is that intake manifold for a gsr?

[2K_GSR]

is that intake manifold for a gsr?
if you re talkin about the blox yes it is but i just sold it yesterday.

[2K_GSR]

bump! intake sold! throw me some offers i need this stuff gone ASAP!

[2K_GSR]

bump! throw me some offers n get these things off my hands asap!

[93delsol15]

i need the ls axles and b series mounts if you have them still pm me i need them asap thanks

[2K_GSR]

i need the ls axles and b series mounts if you have them still pm me i need them asap thanks

pm'ed ya

[2K_GSR]

BUMPP!! I need this stuff gone within a week or else! send me offers asap!

[redskett69]

Pm

[2K_GSR]

bump!

[y-49]

i need the throttle body.call me asap.6785424344

[Dirka Dirka]

The last one I built was a full weight integra gsr. It went consistent 12.10s. Stock short block, a little cutting on the head, custom ground cams. Nothing really fancy.

hahahaha 12.10s my balls! lol

[2K_GSR]

hahahaha 12.10s my balls! lol
thanks for the bump! now who wants to buy somethin?!

[tubby]

do u still have the cf intake? if so pm me please

[2K_GSR]

do u still have the cf intake? if so pm me please
already sold

[Honda!ex!!!]

call me i need some parts!! 678 3604318!!!!

[SCOOBY18]

do you still have the vc?

[Kaden]

how much for tranny or is it gone? LMK

[2K_GSR]

scooby i still got the VC, i ll be in gwinnett fri if u want to meet up
kaden the tranny is sold

[civic-r11]

i need the 02 sensor.. for a odb1 car.. is that 02 sensor that you have is ob1.. if so.. i want it.. pm and do you still have those cams as well cause i am very interested in them too.. pm me about everything if you still have the stuff that i want.. thanks..

[2K_GSR]

i need the 02 sensor.. for a odb1 car.. is that 02 sensor that you have is ob1.. if so.. i want it.. pm and do you still have those cams as well cause i am very interested in them too.. pm me about everything if you still have the stuff that i want.. thanks..

pm'ed

[Black4DrEK]

u have a pm.

[2K_GSR]

u have a pm.
back at ya

[southside]

U got that intake still

[2K_GSR]

nah sold the cf intake

[2K_GSR]

cams sold! bump!