PDA

View Full Version : Hahn Racecraft Super 20g



DervhaneGSX
02-28-2008, 11:27 PM
I have a Hahn Racecraft Super 20g, has about 10k on it, still in kicking ass condition, I wanted to get something different! Asking $400 shipped feel free for questions, it doesn't smoke, has some side to side shaft play, never boosted past 23psi, has a slight ship in the blade nothing major!

Annihilation
03-18-2008, 11:07 PM
that **** is ****ed........completely off balanced..not worth more than $100 cuz the wheel alone is about $150 and then balance and rebuild



why the hell hasnt this been locked

RandomGuy
03-18-2008, 11:10 PM
has a slight ship in the blade nothing major!


LAWL


fubarred nurbo FTL

thats a paperweight

you'll need a compressor wheel from turbochargers.com

and a rebuild costing more than the turbo itself

USMC_is300
05-08-2008, 11:33 PM
i got 75 on it just cause i need the cold side housing

S Ladd
05-11-2008, 07:01 PM
you guys are idiots. The compressor wheel is about $100. ( I have ordered one before ). The rebuild kit is $75 (also, ordered and rebuilt several before), and to balance the wheels/turbine shaft is only $36.

SO a total about $225 would make this a good reliable turbo. Journal bearing turbos are extremely easy to rebuild. Now if it were ball bearing.. thats a different story. They are a PITA to rebuild.

Turbo04
05-11-2008, 09:56 PM
you guys are idiots. The compressor wheel is about $100. ( I have ordered one before ). The rebuild kit is $75 (also, ordered and rebuilt several before), and to balance the wheels/turbine shaft is only $36.

SO a total about $225 would make this a good reliable turbo. Journal bearing turbos are extremely easy to rebuild. Now if it were ball bearing.. thats a different story. They are a PITA to rebuild.


So......225 to get in a workable condition, plus the 400 he's asking for.....yeah this thing sure is worth 625.00. If I'm spending that much I am damn well gonna buy a new one for that much (even if I need to spend more to get a brand new one.) Nice door stop right here :)

P.S. look at the date on his pics.

S Ladd
05-11-2008, 11:38 PM
So......225 to get in a workable condition, plus the 400 he's asking for.....yeah this thing sure is worth 625.00. If I'm spending that much I am damn well gonna buy a new one for that much (even if I need to spend more to get a brand new one.) Nice door stop right here :)

P.S. look at the date on his pics.


Yeah, the date on the pics is not good.. but the last time I checked, a 20g cost around $1150+ shipping new if its internally gated. So even at $625, thats just a little over half.

Its still a good deal, IMO.

S Ladd
05-11-2008, 11:39 PM
And Dervhane, take some new pics and ebay it if you want to sell it a little faster. The last 20g I put on ebay, which also needed a new compressor wheel, went for $350. Just make sure to set a reserve so it doesn't accidentally sell for less...

USMC_is300
05-20-2008, 02:28 AM
Yeah, the date on the pics is not good.. but the last time I checked, a 20g cost around $1150+ shipping new if its internally gated. So even at $625, thats just a little over half.

Its still a good deal, IMO.

that ecxact 20g from hahn if you call them is 750 i know cause i just went from the 16 to the 20 i would get an fp turbo before i would spend that on a blown and abused 20 g. i got 100 if you want to get rid of it. all i want is the exhaust side. and the intake side the center section is crap.

S Ladd
05-22-2008, 07:57 PM
i got 75 on it just cause i need the cold side housing


all I want is the exhaust side

From your previous post you want the cold side... now you want the exhaust side (hotside).. so together you want the whole thing ;) I think its easily worth $250 in its current condition. Go ahead and ebay it. If you get above $250, just send me a few dollars for my time.. LOL