Mr. Antonov
02-19-2008, 05:14 PM
SOLD :goodjob:
Hey guys, I'm selling my brand new Agile AL-3100 Les Paul.. I got it in January so it's not even 2 months old. Reason I need to sell it is I'm looking into getting a halfstack soon. This thing has monster tone, I don't know the exact weight of it but its pretty heavy, thus giving it ridiculous amount of sustain.
It is great for anything from blues to metal. If you know anything about Agiles or frequent any guitar forums (Ultimate-Guitar), you will find that people praise Agile guitars for their quality and affordability.
I'd like cash only and would prefer it if you came and picked it up.
My Cell is 678 576 6161 so call or text!
http://img164.imageshack.us/img164/2345/02192008hz4.jpg
http://img260.imageshack.us/img260/658/02192008001uh0.jpg
Here are specs pulled from Agiles website.
# Extra wide neck for comfortable playing - Width of the neck at the nut: 1 3/4"; at the 21st fret: 2 1/4"
# Solid mahogany (not a multi-ply!) arch top body
# High quality Book-Matched Flame Canadian Maple Top (100% real wood top-not a photo top!)
# Triple bound body, and headstock. Single binding on neck.
# Improved Nickel plate hardware, including Nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
# Two Type V Alnico humbucker pickups for warm, tradional sound
# The AL-3100 comes with improved wiring (single conductor braided 18 gauge American wire for pickups), improved pots (now higher voltage with brass shafts for reduced noise) and an improved pickup selector switch
# Two volume and two tone controls, plus a three way pickup selector switch
# One piece Mahogany set neck with 13.7" (350mm) radius neck for fast play and adjustable truss rod
# Ebony fretboard with 22 Jumbo frets and real Mother-Of-Pearl Trapezodial inlays
# The AL-3100 features GHS strings installed at the factory and a professionally cut Graph Tech Nut
# Individually hand filed frets for professional feel and playability
# Neck taper/thickness at the 1st fret: 21.5 mm; at the 12th fret: 23.5mm
# Overall length: 40"; Scale length: 24.7"
# Body thickness: 2" at edge; Width at the widest point: 13"
# Bridge pole spacing is 3", and the Tail piece pole spacing is 3 1/4"
Hey guys, I'm selling my brand new Agile AL-3100 Les Paul.. I got it in January so it's not even 2 months old. Reason I need to sell it is I'm looking into getting a halfstack soon. This thing has monster tone, I don't know the exact weight of it but its pretty heavy, thus giving it ridiculous amount of sustain.
It is great for anything from blues to metal. If you know anything about Agiles or frequent any guitar forums (Ultimate-Guitar), you will find that people praise Agile guitars for their quality and affordability.
I'd like cash only and would prefer it if you came and picked it up.
My Cell is 678 576 6161 so call or text!
http://img164.imageshack.us/img164/2345/02192008hz4.jpg
http://img260.imageshack.us/img260/658/02192008001uh0.jpg
Here are specs pulled from Agiles website.
# Extra wide neck for comfortable playing - Width of the neck at the nut: 1 3/4"; at the 21st fret: 2 1/4"
# Solid mahogany (not a multi-ply!) arch top body
# High quality Book-Matched Flame Canadian Maple Top (100% real wood top-not a photo top!)
# Triple bound body, and headstock. Single binding on neck.
# Improved Nickel plate hardware, including Nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
# Two Type V Alnico humbucker pickups for warm, tradional sound
# The AL-3100 comes with improved wiring (single conductor braided 18 gauge American wire for pickups), improved pots (now higher voltage with brass shafts for reduced noise) and an improved pickup selector switch
# Two volume and two tone controls, plus a three way pickup selector switch
# One piece Mahogany set neck with 13.7" (350mm) radius neck for fast play and adjustable truss rod
# Ebony fretboard with 22 Jumbo frets and real Mother-Of-Pearl Trapezodial inlays
# The AL-3100 features GHS strings installed at the factory and a professionally cut Graph Tech Nut
# Individually hand filed frets for professional feel and playability
# Neck taper/thickness at the 1st fret: 21.5 mm; at the 12th fret: 23.5mm
# Overall length: 40"; Scale length: 24.7"
# Body thickness: 2" at edge; Width at the widest point: 13"
# Bridge pole spacing is 3", and the Tail piece pole spacing is 3 1/4"