Computer Bios Help

[kfzemx3]

Ok so I just finished my new machine and I need a little help making sure my bios is setup properly, Typically what I do is just set everything to auto and forget about it. I ran Sandra to see if i needed to make any changes to make sure it was performing at its optimum performance (without over clocking) and i got some warnings, Mainly for the FSB speed, the computer shows it running at 1066 but i believe its so posed to match DDR which is 800 (sandra said it needed to be lowered). I'll post exactly what it found when i get home later today (at work and forgot the file) but Here's my specs:

2.4ghz Core2 Quad Q6600 1066mhz

ASUS P5K-E LGA 775 Intel P35 ATX Intel Motherboard

2 x1024gig kingston ddr2 800mhz hyper x

2x 500gig Western Digital Sata 7200 hard drives (raid 0)

geforce 6600 (waiting for 8800gts to come in the mail)

CoolMaster 550w Power Supply

Any help on the matter would greatly be appreciated, just want this thing to run as best as it can

[quickdodge®]

Well damn, lolol. Later, QD.

[ironchef]

AFAIK, the fsb can run asynchronous from the ram speed, but its more optimal for them to run at the same speed, meaning get faster ram.

[4dmin]

^ what the chef said... i checked the specs on the boards and...

Supported CPU
CPU Socket Type LGA 775
CPU Type Core 2 Quad / Core 2 Extreme / Core 2 Duo / Pentium Extreme / Pentium D / Pentium 4

FSB 1333/1066MHz

Chipsets
North Bridge Intel P35
South Bridge Intel ICH9R
Memory
Number of Memory Slots 4×240pin
Memory Standard DDR2 1066
Maximum Memory Supported 8GB
Dual Channel Supported Yes

you should run what is suggest by board manuf

[kfzemx3]

UPGRADE just upgraded to 4x ddr2 8500 kingston dual hyper X 1066mhz