Log in

View Full Version : Handling Mods 5x120 on a Japanese car? *Work wheels inside*


speedminded
02-12-2008, 03:40 PM
Found some Work wheels that have a 5 x 120 lug pattern! 16x7 and 16x8 with a 4" lip in the rear :hump:

http://xrims.com/imgs/dynamic/mags/big/P1010098.jpg

http://xrims.com/imgs/dynamic/mags/big/P1010099.jpg

http://xrims.com/imgs/dynamic/mags/big/P1010104.jpg
JITB
02-12-2008, 03:48 PM
what car has 5x120? euro?
speedminded
02-12-2008, 04:01 PM
what car has 5x120? euro?yep! If all 4 were 16x8 I would buy them this week.
JITB
02-12-2008, 04:06 PM
buy them and sell them for 10x more...lol
mocha latte cupcake
02-12-2008, 04:08 PM
MMMM SO SEX! work it out~!
speedminded
02-12-2008, 04:11 PM
People would be so pissed if I put them on the e30! hahaha :tongue:
DinanM3atl
02-13-2008, 01:05 AM
Why?
mikesEK
02-13-2008, 08:00 AM
5x120 is BMW bolt pattern....I have seen ppl use em on 5x4¾ chevy's
mikesEK
02-13-2008, 08:01 AM
Why? Come get yer cable
Andy_013
02-13-2008, 12:32 PM
Work also make wheels for VW
DinanM3atl
02-13-2008, 12:38 PM
I will sometime soon. I am busy haha
dickdragon
02-13-2008, 01:28 PM
isn't that bolt pattern for a vette or something?
speedminded
02-13-2008, 01:33 PM
isn't that bolt pattern for a vette or something?Technically 5 x 4.75" is 5 x 120.7 :tongue:
dickdragon
02-13-2008, 01:35 PM
correction!:goodjob:
thedream2147
02-21-2008, 05:51 PM
yea..5x120 is used by GM and BMW
speedminded
02-21-2008, 06:01 PM
yea..5x120 is used by GM and BMWGM's is 5x120.7...I seriously doubt they'll interchange.
mp5o
03-04-2008, 05:42 PM
GM's is 5x120.7...I seriously doubt they'll interchange.

They do, although some doubt the safety of doing so.
tubby
03-25-2008, 11:48 AM
GM's is 5x120.7...I seriously doubt they'll interchange.


well i have e36 bottle caps on my s10 so ur rong. and i put my boyd cottingtons that were on the truck before that on a e36m3 so idk wat ur talking about but there the same! :crazy:
speedminded
03-25-2008, 01:01 PM
well i have e36 bottle caps on my s10 so ur rong. and i put my boyd cottingtons that were on the truck before that on a e36m3 so idk wat ur talking about but there the same! :crazy:The difference is 0.7mm center to center or 0.35mm each lug so there shouldn't be a problem with them interchanging...I'd imagine with the lack of quality control and the amount of precise tolerances GM has you could get anything within several millimeters to fit. ;)
bandit1
04-10-2008, 07:49 PM
Yep, Bimmer wheels and GM lugz do cross, saw a FL Trans Am with M5 wheelz..... ewwwww.....


And had to use a F-body mini spare with my E36 once, Hubs can be an issue, but shouldnt be with that wheel. If you wanted to use them on a 5/114, you could use a spacer/converter. Usually around $75-100 a set of two for decent quality
NAIZBST
04-10-2008, 10:34 PM
polish them