PDA

View Full Version : amp



Barefoot
02-06-2008, 07:32 PM
ok i need some help finding an amp. i need something to run 2 sets of these
http://www.mbquart.com/en/produkte/car/reference/produkt.php?nr=rvf_268. pretty like 400 peak watts 4 channel at 4 ohms. not looking for a cheap amp. something main stream high end or high end high end to the point most dont know about it.

BanginJimmy
02-07-2008, 10:26 AM
those are 6x9's. Just find an amp that does 75-90x4 at 4 ohms. As long as its not a dual or jensen you will get everything they have to offer.

heres one, but you can find cheaper if you look at bit.
http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=4154

tluve69
02-07-2008, 11:14 AM
whats about a us amps HC 25? its a competition amp and pushes a over 300 watts at 1/2 ohm? pm me if interested

BanginJimmy
02-07-2008, 05:40 PM
whats about a us amps HC 25? its a competition amp and pushes a over 300 watts at 1/2 ohm? pm me if interested

why would he want an amp stable to 1/2 ohm for use on 2 sets of 6x9's?

Barefoot
02-07-2008, 05:43 PM
why would he want an amp stable to 1/2 ohm for use on 2 sets of 6x9's?
i was thinkin the same thing just didnt worry about it.

SRCRX
02-07-2008, 06:09 PM
why would he want an amp stable to 1/2 ohm for use on 2 sets of 6x9's?

He was talking about a wall of 6x9's :D

tluve69
02-07-2008, 06:38 PM
I never said he needed to run it at 1/2 ohm, the amp is stable to that I ran 3 jl 10'2 and it pounded and I have also ran my 3 sets of mids off of this, its not a sub mids/high its is a universal setup. I have a HC50 and at 1/2 ohm its 800 watts. they are just a clean and powerful amp setup and I was just letting him know it would do that plus whatever he wanted. Guess I should have beena little more clear in my post, my bad

redgst97
02-07-2008, 09:43 PM
Olk school USAmps (circa 1994-ish) are AWESOME, low-impedence amps. No question. I would NOT (personally) put them on a set of mid/highs again. However, thats just my opinion.

You want something HIGH end, and sort of "exotic"? You will have to PAY to play, but look at Helix or Genesis. A bit more mainstream, and I might suggest ARC or Zapco. Something "common" but good, try Polk Audio, Memphis, or Rockford. Some "crap", try Dual or Insignia....

Barefoot
02-08-2008, 01:29 AM
Olk school USAmps (circa 1994-ish) are AWESOME, low-impedence amps. No question. I would NOT (personally) put them on a set of mid/highs again. However, thats just my opinion.

You want something HIGH end, and sort of "exotic"? You will have to PAY to play, but look at Helix or Genesis. A bit more mainstream, and I might suggest ARC or Zapco. Something "common" but good, try Polk Audio, Memphis, or Rockford. Some "crap", try Dual or Insignia....
Helix or Genesis thats more what im lookin for. ill do some research into them see what i come up with.

BanginJimmy
02-08-2008, 08:38 PM
Helix or Genesis thats more what im lookin for. ill do some research into them see what i come up with.


dont waste your money on a high end amp for 6x9's. But if you do want high end, you can look at the Tru Technology copper line also.

After looking, the copper line is only 250x4 at 4 ohm.

Barefoot
02-08-2008, 09:40 PM
i ended up getting a great deal on a mb quart pab 4100. so i went with it. not really want i wanted but if i dont like it i can always sell it and get something else.

boosted b
02-09-2008, 08:07 AM
i have a 1100 watt sen amp pm if u want give u a good deal

Barefoot
02-09-2008, 10:48 AM
i have a 1100 watt sen amp pm if u want give u a good deal

i ended up getting a great deal on a mb quart pab 4100. so i went with it. not really want i wanted but if i dont like it i can always sell it and get something else.sry

boosted b
02-09-2008, 11:38 AM
it's cool