CarbonGS' GS3 Under Construction

[carbongs]

Haha, as stated in the GS4 thread that I have going, I am preparing the GS3 for some changes for in time to debut at the World of Wheels Birmingham next weekend. I saw what Automan has done so I needed to step up my game. He is a great team mate and always drives me to do more and more! :thumbup: Well, after lots of time and consideration this is what I've done thus far. The projects should be finished next Tuesday night just in time to roll out next Thursday monrning to roll into the World of Wheels.



Here's a little teaser!



http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS3.jpg



lol you know me, look at my screen name! I needed more carbon!











































ok, enough with the comedics, here are the rest of the pics for your viewing pleasure. Once again, nothing is completely finished. give me some time to finish it all up before criticizing about cleanliness etc... lol. i love you guys!



The wood grain i purchased from a member here serves as an extra set and i decided to wrap it all up in carbon. make my interior flow with my exterior.



http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS31.jpg



http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS32.jpg



http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS33.jpg



now, before you say anything about this center piece, take into mind that i am using the middle section for my nitrous toggles (activation and purge). the area where the middle piece meets the side pieces will be sanded flat and painted gloss black to create sort of a seam.



http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS34.jpg



i got a graduation present out of the blue from my mom and dad. i've been asking for an in dash dvd player for years, back to when i had my m3. i guess persistance pays off! lol. i got what i wanted and more. my parents have always been supportive of my mods and they definitely surprised me with this one. very rarely do i get something my parents buy so that makes it extra special!



pioneer avic d3 FTW!!!



http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS35.jpg



The beginnings of my new trunk set up



http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS36.jpg



Up under the hood. got most of the plastic pieces, my intake and intake heat shield painted gloss black. (Thanks Bucky!) I have an HKS cam gear that i will be putting on as well, that's why there's a cut out on my stock exhaust cam gear.



http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS37.jpg



http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS38.jpg

[Sammich]

where do you get the fabric from and materials to do this..i wana do that

[blackboi50]

sicknesssss!!!!:goodjob:........now stop being everywhere im at!!!!:D.....1

[carbongs]

where do you get the fabric from and materials to do this..i wana do that

i work with super star customs! BUCKY FTW!!!


sicknesssss!!!!:goodjob:........now stop being everywhere im at!!!!:D.....1

lol stop stalking me! i am always there first!

[carbongs]

Here you can see where my Bucky got creative with some paint.

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9175.jpg

I am also getting my pro lex performance exhaust manifold heat shield painted black. after some research i found that it really doesn't do much of a job shielding heat from the intake piping so i decided to create a show piece of it. i cut out a rectangular window so that you can see the headers through the hole. It should add for some good contrast with the black heat shield and the gold headers.

up close idea of it. it is only filler primered right now. not painted yet.

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9173.jpg

further away

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9174.jpg

Here are both of my projects side by side!

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS39.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS311.jpg

that is all for now. i'll keep you guys updated

[Sammich]

i work with super star customs! BUCKY FTW!!!


since when does bucky do CF?? hell nawz...OMG..i need to have my maxima done

[carbongs]

yup come holla!

[blackboi50]

yup come holla!

btw i hate both of your cars they are the ugliest thing this side of town.......FACK a V8 lexus and a show ready GS3...:2up:...



































can i come with u to birmingham????:thinking:........:lmfao:.....1

[Sammich]

btw i hate both of your cars they are the ugliest thing this side of town.......FACK a V8 lexus and a show ready GS3...:2up:...



can i come with u to birmingham????:thinking:........:lmfao:.....1

arghh teezz are uninvited:lmfao:

[Brett]

LOOKIN GOOD BRO

[rollininstyle2004]

Good stuff Tony :goodjob:

Also...I see my car sneaking in the shot in the background:

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/2-1-08GS311.jpg

[carbongs]

lol yeah we are getting started on it j!

[ZeDFuNk]

not enough carbon. need more carbon.

[carbongs]

thanks, lol i need more don't i?

[rollininstyle2004]

lol yeah we are getting started on it j!

Awesome, I cant wait to see it all put back together :goodjob: :goodjob:

[ZeDFuNk]

lol car looks great man :]

[xatlxshawtyx]

Looks good :) How come I only got to see one of your cars???

[xlilvi3tx]

damn thats ALOT of cf! lookin real good though... straight show car huh? repped for some great work

[YokotaS13]

aint that a *****!
i cant get another set of LXZs!

[carbongs]

Looks good :) How come I only got to see one of your cars???

i got the gs4 late last year. it's been under wraps lol :goodjob:


damn thats ALOT of cf! lookin real good though... straight show car huh? repped for some great work

thanks i appreciate the kind words! not just a show car. i love driving this car! it is out pretty much every day it doesn't rain! thanks for the rep!


aint that a *****!
i cant get another set of LXZs!

yeah i don't have those. i have the exe konvex wheels. would love a set of lxz's though

[carbongs]

^ what a dork! lol. sadly i got that a lot at a couple of shows i've been to this year already! "is that snake's skin?"

Ok, so today was a very productive day for me considering how late it started lol. I want to thank Dan, Juan, and and Shin (GGPIS3, Jvillagran and CarbonIS) for helping me out with parts and last night with my AEM wideband install, and thanks to Bucky for loaning me his spare carbon fiber single guage pod to use until we come up with something better later.

We took off the exisiting paint on the nitrous bottles yesterday night with aircraft paint remover. It is some cool stuff if you haven't ever used it before. Apply the goopy stuff on and spread it around. Let is sit for about 5 minutes and watch the paint bubble off! lol we then primered the bottles with a little sandable primer just to make the paint adhearable later. Thanks to Dan for letting me use one of his spare nitrous bottles until I get my new one in the mail!

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9185.jpg

Here is my header heat shield, along with the shifter panel, and double din face. These will be painted later today when Bucky gets a chance.

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9186.jpg

We trimmed the carbon panels and sanded the edges. We will be added 1 or 2 more flood coats of resin on top before sanding down and clearing them.

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9176.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9177.jpg

Here is the AEM Wideband. It is temporarily mounted to a chrome bezel guage holder.

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9180.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9181.jpg

And this morning with the carbon fiber guage pod Bucky let me borrow. I only have it held down right now with double sided 3m tape until i figure out what to do. I am trying to source a driver's side a-pillar so that i can mold my triple guage pod to it and wrap it with carbon fiber. until then this guage pod cup will do.

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9182.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9183.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9184.jpg

[rollininstyle2004]

Damn Tony...steppin it up. I cant wait for this season :)

[Jimmy B]

wow, nice!! can i have the other lexus :) you dont need two do you? lol

[YokotaS13]

i got the gs4 late last year. it's been under wraps lol :goodjob:



thanks i appreciate the kind words! not just a show car. i love driving this car! it is out pretty much every day it doesn't rain! thanks for the rep!



yeah i don't have those. i have the exe konvex wheels. would love a set of lxz's though
waitr wait wait wait

those are KNOCKOFF LXZ?

[carbongs]

waitr wait wait wait

those are KNOCKOFF LXZ?

no no. they just happen to be a similar design. the exe wheels have a machined finish and the inside of the spokes are different color. check out www.exewheels.com

[YokotaS13]

similar design?
http://www.exewheels.com/images/gallery_konvex_1_lg.jpg
yours

http://farm2.static.flickr.com/1282/797892751_ab50192b15.jpg
mine

blatent knockoff lol
and kockoff fail.

[YokotaS13]

But on a real note
dont let that make you think im hating on your car

I LOVE the CF interior. i might call up bucky and see if i can send him alot of my stuff.

[KurtzBoom]

ohh what a shining Car.. Great work u had did..


Kurtz

[Cyclonehatch]

Tony, your car is looking great! I met you last year at a seloc meeting, and was wow'ed by the cleaness. Your car is getting more and more carboned everytime I see you post. I would love to see your lexus in person.

[carbongs]

But on a real note
dont let that make you think im hating on your car

I LOVE the CF interior. i might call up bucky and see if i can send him alot of my stuff.

no prob man. i never realized how similar these two wheels are. maybe it is axis' way of copyin the lxz's. def call bucky man, we'll hook you up!


ohh what a shining Car.. Great work u had did..

Kurtz

thanks bro! i appreciate it!


Tony, your car is looking great! I met you last year at a seloc meeting, and was wow'ed by the cleaness. Your car is getting more and more carboned everytime I see you post. I would love to see your lexus in person.

hey thanks man. i appreciate the kind words! pm me bro, we'll hook up and you can check it out in person anytime!

[carbongs]

From today!

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9227.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9229.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9231.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9232.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9234.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9235.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9237.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9238.jpg

[carbongs]

hey hey hey, put in my PS2 Slim in today and took off my carbon interior pieces again to get them sanded down and recleared to a smooth finish.

PS2 Slim with i-Pod in the glove box

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9413.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9414.jpg

Carbon trim pieces are all off again.

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9416.jpg

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9415.jpg

[carbongs]

I also had a member pm me about how i did the initial install. well, for me it was because i also go on long road trips to shows in this car and i want to be able to use other electonic devices on the road i.e. laptop, charge phone, etc... so i got a power inverter and installed it directly to my battery through the firewall directly behind the battery location. i took off the glove box console, and fed the wires through to the inverter. while i had my dash apart for the carbon fiber trim etc... i fed the audio and video rca's to the pioneer avic d-3 which already has pre outs and ins for things like gaming systems, rear head rest monitors, and back up cameras.

i mounted the inverter here out of the way

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9420.jpg

i still have some work to do. i over estimated the size of the hole i dremeled out but i will be wrapping the whole glovebox on the inside with carpet to make it a cleaner install.

you can see the big hole behind the ps2 here

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9422.jpg

[carbongs]

Bucky finished up the carbon today! Woot Woot!

http://i49.photobucket.com/albums/f279/CarbonGS/GS300%20Build/DSCN9423.jpg

[YakuzaCiviC]

damn nice!! Vip :goodjob:

[blackboi50]

Daamn TONY :eek:......coming along super nice man:goodjob:......1

[carbongs]

hey thanks!

[rollininstyle2004]

Good stuff sir...give me a call, I want to hear how Sunday went :)

[KidSaru]

Wait...They're NOT Weds? What is the sizing?

[carbongs]

Good stuff sir...give me a call, I want to hear how Sunday went :)

Will do


Wait...They're NOT Weds? What is the sizing?

nope not Weds, they are EXE Konvex made by Axis. 20"x10" rear +35 and 20"x9" front +37