View Full Version : auto to manual conversion
ulbsry02
01-30-2008, 12:12 AM
im going to do the conversion, but can anyone give me a list of the parts i will need? thanx in advance.:D
99-00 civic hatch
GaGen2Teg
01-30-2008, 12:12 AM
what car would be nice to know
ulbsry02
01-30-2008, 12:16 AM
sorry fixed
GaGen2Teg
01-30-2008, 12:26 AM
http://www.honda-tech.com/zerothread?id=1337459&page=1
.blank cd
01-30-2008, 12:27 AM
since your car is OBD2, you'll need a same-year computer from a 5spd car, transmission, starter from a 5 speed, transmission mount, shifter, and assuming its a hydraulic trans, you'll need a master cylinder, resivoir, slave, shifter assembly, linkage, all the hardware, a shift boot and a knob
Got Milk?
01-30-2008, 12:38 AM
since your car is OBD2, you'll need a same-year computer from a 5spd car, transmission, starter from a 5 speed, transmission mount, shifter, and assuming its a hydraulic trans, you'll need a master cylinder, resivoir, slave, shifter assembly, linkage, all the hardware, a shift boot and a knob
god damn, might as well sell that car, and but u the same car with a manual tranny.
.blank cd
01-30-2008, 12:59 AM
its not as bad as it looks. hard part is sourcing all the parts together. I have to do mine, all my stuff can be had for 500 bucks or so. but im waiting on the H to come around so i'll do it all at the same time. If you plan on swapping the motor to a B series, i would wait untill you did that and do it all at once. No point in buying 2 transmissions
ulbsry02
01-30-2008, 10:10 AM
yeah i do plan on the B swap, thanks for all the info
EmminoDaGreat
01-30-2008, 10:29 AM
if you need the swap done let me know.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.