View Full Version : need help with b18 swap
NeWTRouBLeArMy
01-28-2008, 10:26 PM
ok i just did a b18a swap in a 91 crx dx i did all te wiring write but when i start the car it idles at 4500 rpms i was told it might be the intake gasket so i replaced the intake and the gasket then i was told it might be the sensors so i replaced all of them then they thoght it was the head so i replaced the head i am giving up almost does any one have any idea as to what it might be
thanks
NeWTRouBLeArMy
01-29-2008, 11:01 AM
anybody got any ideas
KidSaru
01-29-2008, 11:15 AM
Check for vaccum leaks. Throttle cable may be over tightened as well.
EmminoDaGreat
01-29-2008, 11:32 AM
x2 on vacuum leaks and tight throttle cable.
1flysi
01-29-2008, 01:13 PM
Did you switch the tps wires around?
NeWTRouBLeArMy
01-29-2008, 02:21 PM
thanks for the help the throtle cable was the only thing i didnt think of its a small problem and i was thinking big
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.