Prelude H22 369whp

[ILLSMOKEu]

there is few pics of my car just got it back not to long ago 12psi putting 306whp on 18psi 369whp...fun to drive though daily on 12psi

[BKgen®]

any exterior shots?

[Frög]

^^ im scared its going to be rice.. i see a wing west avenger front bumper on his avatar, and trust me, its a ugly ass rice front bumper..

nice engine bay though..

[HachiDori]

TEASER!! WTF

[Civic_H2b]

Nice

[13Bracer]

^^ im scared its going to be rice.. i see a wing west avenger front bumper on his avatar, and trust me, its a ugly ass rice front bumper..

nice engine bay though..
x2

[WhiteAccord]

ehhhhh.... I dont know.... Those look like small numbers. What are your specs?

[ILLSMOKEu]

naaa i got greaddy lip and stock front end....

[01SpectraGSX]

Nice engine shot though

[ILLSMOKEu]

ehhhhh.... I dont know.... Those look like small numbers. What are your specs?
what small numbers i dont get :umno:

[WhiteAccord]

Same motor... Guy put out 420-450ish with two more PSI....So again... whats your specs?

[MistaCee]

Damn dude you need a wire tuck badly. Decent numbers though

[chrisdohck]

nice

[white_rice]

any exterior shots?


x2

[itzjustmikey]

is that a kit or is it custom?

[itzjustmikey]

Same motor... Guy put out 420-450ish with two more PSI....So again... whats your specs?

not the same turbo or setup lol

[SRCRX]

^^ im scared its going to be rice.. i see a wing west avenger front bumper on his avatar, and trust me, its a ugly ass rice front bumper..

nice engine bay though..

Damm, Haten hard :yes:

[04Prerunner]

needs a minor wire tuck..under the hood looks disheveled but damn thats alot of power

[IndianStig]

Same motor... Guy put out 420-450ish with two more PSI....So again... whats your specs?

yeah but isn't he running a GT40R?

thats one fcking huge turbo

[4uh8ers]

I bet that thing flys. Its got v-tach

[_Christian_]

good sh!t man. interested in the setup as well.

[404 THE DC4]

Damn dude you need a wire tuck badly. Decent numbers though

x2

[Nemesis]

Sweet ass numbers, who did all your work? Any dyno plots?

[TonyRSX]

exterior shots/wire tuck

x4652435832

[ATK_Designs]

yea, any work on the motor and specs?

Btw, nice numbers. Must be fun to drive daily :)

[Ch0psticks11]

good numbers......the engine bay looks a mess though. lets see some exterior shots!

[TRAYZ06]

there is few pics of my car just got it back not to long ago 12psi putting 306whp on 18psi 369whp...fun to drive though daily on 12psi

I think I saw you on 400 the other day. ;)

http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_0457.jpg

[STI101]

Man dont believe a word he says. That **** is RICE!!!!!!!! I could take you in my jeep with my eyes closed buddy. Hey why haven t you been at Nava rice boy?

[Just_CHill]

Looks good man. Very nice numbers.

[admedlin]

yeah i bet it would be fun to drive on 12psi. looks good, should probably make a little more power, but looks like a fairly conservative turbo on there

[fuct.]

Man dont believe a word he says. That **** is RICE!!!!!!!! I could take you in my jeep with my eyes closed buddy. Hey why haven t you been at Nava rice boy?

im with this guy! sell it and buy a type-r!

[ILLSMOKEu]

I think I saw you on 400 the other day. ;)

http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_0457.jpg
i think i did see u on GA400,i was just messing around i knew i didnt have chance on 12psi maybe with 18psi,but unfotinatly i have manual boost controller,i mean we could pull over :yes: so i could adjust it :blah: :blah: :blah: then go..

[ILLSMOKEu]

Man dont believe a word he says. That **** is RICE!!!!!!!! I could take you in my jeep with my eyes closed buddy. Hey why haven t you been at Nava rice boy?
Jason is that u that talking trash with you "Fast truck" :goodjob:
Few pics from Inside some hatters were asking for :taun:..next time am Tuning i should put over 400whp hopefully :gay:

[19'sPrelude]

List the setup/dyno sheet or I call shenanigans :)

[soul]

holy ****, can you just put some ext. shots up for god ****in sakes

[itzjustmikey]

lol my buddy is interested in your turbo setup if its a kit could you let me get the name?

[19'sPrelude]

holy ****, can you just put some ext. shots up for god ****in sakes

:stupid:

[isa2o3]

paint the manifold.

[AnclyT]

nice numbers

you should list your turbo setup

engine bay needs to be cleaned up a bit!

[ILLSMOKEu]

hey guys sorry havent put pics :camera: yet,i just simple didnt have any :rolleyes: so i went to my car a took few shots,they might be little dark...setup :thinking: Garret turbo 61 trim,38mm Waste gate,3inch exhaust,revhard turbo manifold it was better looking when i bought it,680cc injectors,p72 for tuning,2 moths been in shop also getting some other suspension and tranny done + 3hours of tuning =369whp not to bad, can tell the difference :bannana: ....yea Mike GearHead did all the work car runs good,but still need more tuning i think ...so yea if u have more ??? ask ill answer idunno how soon cus i dont get on IA to often maybe now i will :cheers:

[ep9716]

roflcopter

[chinitoxamor]

hey guys sorry havent put pics :camera: yet,i just simple didnt have any :rolleyes: so i went to my car a took few shots,they might be little dark...setup :thinking: Garret turbo 61 trim,38mm Waste gate,3inch exhaust,revhard turbo manifold it was better looking when i bought it,680cc injectors,p72 for tuning,2 moths been in shop also getting some other suspension and tranny done + 3hours of tuning =369whp not to bad, can tell the difference :bannana: ....yea Mike GearHead did all the work car runs good,but still need more tuning i think ...so yea if u have more ??? ask ill answer idunno how soon cus i dont get on IA to often maybe now i will :cheers:


i like the lip.. looks clean

[chinitoxamor]

let me know if u wanna sell the wheels

[13Bracer]

nice greddy lip on a prelude = SEX!!!!!

[JayKnight]

If you want to see some impressive Turbo H22 Lude Numbers, in a 3rd gen no less....Look for JTC Dudeman. He is running some kind of boost by gear set up , some mad crazy internals, and all sorts of other stuff too complicated for me to even try to understand.

Here I did all the hard work for you......
http://www.preludepower.com/forums/showthread.php?t=258835
There are pics of his ride there, and a pic of his dyno sheet at the time.

Here is the low down that get him around...
1989 Honda Prelude Si 2.0 H22a T60-1

Power:
600 hp.

525whp/400ftlbstq @ 20psi on pump gas


Engine Specifications:
JDM H22a (9500rpm redline)
Darton Sleeves
Crower Billet Rods
Endyn Rollerwave Design Pistons
Ferrea 1mm Oversized Stainless Steel Valves
Ferrea Titanium Springs
Ferrea Titanium Retainers
Ferrea Titanium Valve Seats
Ferrea Titanium Clips
ARP Head Studs
ARP Main Studs
ARP Oil Pan Studs
Moroso Max Oil Pickup Tube
Cometic HD Head Gasket
Clutch Masters Aluminium Flywheel
Clutch Masters Twin-disk Ceramic Clutch
Clutch Masters High HP Throwout Bearing
Pro-Drive Billet Oil Pump Set
Venom Sheetmetal Intake Manifold
MSD Digital-6 plus Ignition
MSD Blaster Coil
Skunk 2 Cam Gears
Ported and Polished Head by Eagle Machine
Total Seal Gapless Piston Rings
Micropolished and Balanced Block by Eagle Machine
MSD Spark Plug Wires
NGK-9 Spark Plugs
Bored Throttle Body
Wideband O2 Sensor w/ digital readout in place of dimmer..
AEM Alternator Pulley
Custom Underdrive Pulley (No P/S)
Moroso Oil Pan
Earls SS Oil Return Lines

Engine Misc.:
Place Racing Motor Mounts
PRI Engine Wiring Harness
OBD0 to OBD1 Conversion Harness
DC Sports Anodized Blue Plug Wire Cover
Custom Hydraulic Line for Slave Cylinder
EVERY Bracket is chromed or polished (including headlight motors) by Roadhouse Polishing
Polished Valve Cover
Polished Head
Polished Distributor and Accessories
Polished Block
Polished Transmission
Chrome Intercooler Piping
Polished Intercooler

Turbocharger & Induction:
Revhard CUSTOM Turbo Manifold(modified for the 3rd gen, moved wastegate)
Turbonetics T60-1 Stage IV Turbo .58 AR T-4 Housing
Spearco Intercooler 32x10.5x3.5 Core
HKS 40mm External Wastegate
HKS Super Sequential Blow Off Valve
Blitz Boost Controller
2.5" Intercooler Piping by John Lee Designs

Fuel & Tuning:
AEM Fuel Rail
AEM Fuel Pressure Regulator
AEM Fuel Filter
RC Engineering 1000cc Injectors
Twin Endyn Fuel Pumps
Earls Fuel Line Fittings
Earls 3/8" Stainless Steel Fuel Lines
Custom Triangle Fuel Sump in Gas Tank
Hondata S300
GM 3 Bar Map Sensor
Devils Own 3bar Progressive Methanol Injection Kit (10 gallons per hour nozzle)
2.5 Gallon Methanol Tank
250psi Devils Own Methanol pump
Washer Fluid Tank in Trunk for Intercooler Sprayer

Exhaust:
3" ID Downpipe (custom) by John Lee Designs
3" ID Exhaust (completely) by John Lee Designs
Dual Tip Muffler
Exhaust V Clamps(holds it together)
Custom Wastegate dump tube by John Lee Designs

Drivetrain:
Quaife LSD
Custom Axles 4 1000 hp(driveshaftshop lvl 5)
Suspension, wheels & tires:
Energy Suspension Urethane Bushings CUSTOM modified to fit
Tokico Blue Shocks
Adjustable Coilovers in front
Nuespeed Springs in rear
Slotted and Cross Drilled Rotors
5zigen 17" wheels
Extended front wheel studs
Drag Slicks for track
Energy Suspension Universal Sway Bar End Links
Ingalls Camber Kit front/rear

Interior:
Indiglo Gauges
Razo Shift Knob
4bidden Short Shifter
4th Gen Shift Linkage
Kangaroo Leather Shift Boot with Blue Stitching
4th Gen Front Seats in Kangaroo Leather with Blue Stitching
3rd Gen Rear Seats Covered in Kangaroo Leather
Custom Black Carpet
Grant GT Steering Wheel
Custom Switch Panel
CLOCK COVER intact
Compustar alarm
Doorlock Actuators(i.e. power door locks)

Stereo
Kicker SS 6.5" components
Kicker 8" L5 subwoofer
Kicker 700.4 SX amplifier
Custom door panels
Eclipse CD4000
Custom subwoofer box
Custom amp rack
Power
Optima Red Top Battery relocated in trunk
Motorcycle Battery(Odyssey 545) in front mounted to frame behind front bumper

Exterior:
Custom Dodge Viper Blue paintjob
Online Performance Body Kit
Eurolite H4 headlights
Custom Painted Tail Lights(all red)
Quick Connect Zuess Fittings for Front Bumper
Custom Tag

Later !!!

[ILLSMOKEu]

If you want to see some impressive Turbo H22 Lude Numbers, in a 3rd gen no less....Look for JTC Dudeman. He is running some kind of boost by gear set up , some mad crazy internals, and all sorts of other stuff too complicated for me to even try to understand.

Here I did all the hard work for you......
http://www.preludepower.com/forums/showthread.php?t=258835
There are pics of his ride there, and a pic of his dyno sheet at the time.

Here is the low down that get him around...
1989 Honda Prelude Si 2.0 H22a T60-1

Power:
600 hp.

525whp/400ftlbstq @ 20psi on pump gas


Engine Specifications:
JDM H22a (9500rpm redline)
Darton Sleeves
Crower Billet Rods
Endyn Rollerwave Design Pistons
Ferrea 1mm Oversized Stainless Steel Valves
Ferrea Titanium Springs
Ferrea Titanium Retainers
Ferrea Titanium Valve Seats
Ferrea Titanium Clips
ARP Head Studs
ARP Main Studs
ARP Oil Pan Studs
Moroso Max Oil Pickup Tube
Cometic HD Head Gasket
Clutch Masters Aluminium Flywheel
Clutch Masters Twin-disk Ceramic Clutch
Clutch Masters High HP Throwout Bearing
Pro-Drive Billet Oil Pump Set
Venom Sheetmetal Intake Manifold
MSD Digital-6 plus Ignition
MSD Blaster Coil
Skunk 2 Cam Gears
Ported and Polished Head by Eagle Machine
Total Seal Gapless Piston Rings
Micropolished and Balanced Block by Eagle Machine
MSD Spark Plug Wires
NGK-9 Spark Plugs
Bored Throttle Body
Wideband O2 Sensor w/ digital readout in place of dimmer..
AEM Alternator Pulley
Custom Underdrive Pulley (No P/S)
Moroso Oil Pan
Earls SS Oil Return Lines

Engine Misc.:
Place Racing Motor Mounts
PRI Engine Wiring Harness
OBD0 to OBD1 Conversion Harness
DC Sports Anodized Blue Plug Wire Cover
Custom Hydraulic Line for Slave Cylinder
EVERY Bracket is chromed or polished (including headlight motors) by Roadhouse Polishing
Polished Valve Cover
Polished Head
Polished Distributor and Accessories
Polished Block
Polished Transmission
Chrome Intercooler Piping
Polished Intercooler

Turbocharger & Induction:
Revhard CUSTOM Turbo Manifold(modified for the 3rd gen, moved wastegate)
Turbonetics T60-1 Stage IV Turbo .58 AR T-4 Housing
Spearco Intercooler 32x10.5x3.5 Core
HKS 40mm External Wastegate
HKS Super Sequential Blow Off Valve
Blitz Boost Controller
2.5" Intercooler Piping by John Lee Designs

Fuel & Tuning:
AEM Fuel Rail
AEM Fuel Pressure Regulator
AEM Fuel Filter
RC Engineering 1000cc Injectors
Twin Endyn Fuel Pumps
Earls Fuel Line Fittings
Earls 3/8" Stainless Steel Fuel Lines
Custom Triangle Fuel Sump in Gas Tank
Hondata S300
GM 3 Bar Map Sensor
Devils Own 3bar Progressive Methanol Injection Kit (10 gallons per hour nozzle)
2.5 Gallon Methanol Tank
250psi Devils Own Methanol pump
Washer Fluid Tank in Trunk for Intercooler Sprayer

Exhaust:
3" ID Downpipe (custom) by John Lee Designs
3" ID Exhaust (completely) by John Lee Designs
Dual Tip Muffler
Exhaust V Clamps(holds it together)
Custom Wastegate dump tube by John Lee Designs

Drivetrain:
Quaife LSD
Custom Axles 4 1000 hp(driveshaftshop lvl 5)
Suspension, wheels & tires:
Energy Suspension Urethane Bushings CUSTOM modified to fit
Tokico Blue Shocks
Adjustable Coilovers in front
Nuespeed Springs in rear
Slotted and Cross Drilled Rotors
5zigen 17" wheels
Extended front wheel studs
Drag Slicks for track
Energy Suspension Universal Sway Bar End Links
Ingalls Camber Kit front/rear

Interior:
Indiglo Gauges
Razo Shift Knob
4bidden Short Shifter
4th Gen Shift Linkage
Kangaroo Leather Shift Boot with Blue Stitching
4th Gen Front Seats in Kangaroo Leather with Blue Stitching
3rd Gen Rear Seats Covered in Kangaroo Leather
Custom Black Carpet
Grant GT Steering Wheel
Custom Switch Panel
CLOCK COVER intact
Compustar alarm
Doorlock Actuators(i.e. power door locks)

Stereo
Kicker SS 6.5" components
Kicker 8" L5 subwoofer
Kicker 700.4 SX amplifier
Custom door panels
Eclipse CD4000
Custom subwoofer box
Custom amp rack
Power
Optima Red Top Battery relocated in trunk
Motorcycle Battery(Odyssey 545) in front mounted to frame behind front bumper

Exterior:
Custom Dodge Viper Blue paintjob
Online Performance Body Kit
Eurolite H4 headlights
Custom Painted Tail Lights(all red)
Quick Connect Zuess Fittings for Front Bumper
Custom Tag

Later !!!
i know that guy he run 13s if am not mistaking...

[soul]

i know that guy he run 13s if am not mistaking...
i hope not


wasted alot of money and time if that was the case lol

[JayKnight]

i know that guy he run 13s if am not mistaking...

Yep, that is my friend Tommy. That car has come a long way from when he first bought it. I got to give him mad props, since he did everything himself.

He has actually been banned from Commerce until he gets a full roll cage in his car. Haters !!! :tongue1: :tongue1: :tongue1:

Later !!!

[ILLSMOKEu]

i hope not


wasted alot of money and time if that was the case lol
totally agree,whats the point of all that horse power if u cant put it down all it is just a numbers at the end of the day no offense to that guy(with big numbers)
and yea Commerce Sucks any way :crazy:

[ILLSMOKEu]

i finally got new aviator thanks guys...

[SiRed94]

i know that guy he run 13s if am not mistaking...

hahah hell naw... big waste of time...

[AnclyT]

just buy some slicks

[#1Beaver]

damn nice

[Dwisforme05]

that is one impressive lude. i think ur hood needs to be re finished tho lol. might just be the pics but it seems dull.

[WhiteAccord]

So ummmm... motor wise... Is it built? Or what?

[integraguy06]

engine looks clean, always wanted to build one

[soul]

that is one impressive lude. i think ur hood needs to be re finished tho lol. might just be the pics but it seems dull.
i think your hood needs to be refinished, im not sure i cant tell, looks likea big blck spot or something...

[Frög]

nice!! i was scared for a minute.. sweet ride, i used to have a prelude..


oh and btw, don't listen to JayKnight too much, he's got red tint, and i dont want him to influence you.. lol



ya ya ya j/k...

[jew_boy]

very clean

[xdavidscenex]

yes a greed needs wire tuck

[ILLSMOKEu]

that is one impressive lude. i think ur hood needs to be re finished tho lol. might just be the pics but it seems dull.
yea u right my hood start fading after i put turbo cus of heat that generates from turbo,but i dont know where i can get it done or am thinking just get a stock hood...

[manilikecars]

nice!! i was scared for a minute.. sweet ride, i used to have a prelude..


oh and btw, don't listen to JayKnight too much, he's got red tint, and i dont want him to influence you.. lol



ya ya ya j/k...

:no: busting on your car jay haha

[ILLSMOKEu]

:no: busting on your car jay haha
haha thats funny :goodjob:

[Vuongy_Dong]

good numbers for a 60-1 turbo.

[JayKnight]

:no: busting on your car jay haha

Oh thats alright. I just won't let him eat any thing at the BBQ.

Mess with the King, you don't get any wings. BBQ King that is)

And I now him, notice the J/K at the end of his post?
He is alright by me.

Later !!!

[Frög]

Oh thats alright. I just won't let him eat any thing at the BBQ.

Mess with the King, you don't get any wings. BBQ King that is)

And I now him, notice the J/K at the end of his post?
He is alright by me.

Later !!!

good old days when we had the prelude meets!! and i better get some food at the BBQ!!!!!!!!!!!!!!!

[bigdare23]

All the people that are telling him to do a wire tuck, do you even have a tuck? If not, stfu LOL

[Frög]

All the people that are telling him to do a wire tuck, do you even have a tuck? If not, stfu LOL

:yes: and i would never do a wire tuck..

[ALVIN]

bucky can refinish the hood give him a pm he is on here

[manilikecars]

yeah, i don't know about wire tucks on ludes

[redpanda]

nice solid numbers. lip's not my taste but goodwork

[RandomGuy]

i finally got new aviator thanks guys...http://farm2.static.flickr.com/1117/528074187_c67316827e.jpg

[Doppelgänger]

Yup, thought that car looked familiar from seein' it up at AutoFab for awhile. Nice numbers. Did Jerry do the tuning?

[01CDMLUDER]

nice setup and good numbers! car looks good too!

[batlude]

I like the Greddy lip man!!! AnclyT has a H22 motor in his EK... it has crazy number. Wish my prelude has turbo

[low mileage]

clean engine bay

[youngmill]

that engine is clean

[ILLSMOKEu]

thanks for all the compliments and suggestions guys am glad most of u like :hump: what they saw on pics,but for those who didnt :smackass: thanks anyway for stopping by...maybe ill some of you tomorrow at Varsity come buy say hi :goodjob: dont be shy :gay: