ATL, GA - G&Z Meet - Feb 17, Sunday: 3PM

[ATK_Designs]

February 17, 2008 Georgia G&Z meeting will be held at 3pm at:

Taco Mac Lindbergh City Center
573 Main Street
Atlanta, GA 30324
(404) 574-5813

http://www.taco-mac.com/lindbergh_city_center.htm

Taco Mac is behind Chili's and Longhorn on Piedmont Ave just south of Sidney Marcus (southernmost exit for Ga400).


We will meet on the 4th floor of the parking deck.

What this means is:
As you go into the parking deck (it is behind the Chili's and Longhorn), take a ticket and go into the parking deck.
Go up towards the Marta area.
On the 3rd floor of the parking deck, you will see another ticketing machine.
Stick your parking ticket into the 3rd floor machine and wait for the ticket to come back out.
Proceed up to the 4th floor.
We will park away from the elevators as this is a large area for parking together.

Please RSVP if you are able to make it (and if you are bringing guests). I will let Taco Mac know the approximate number that we are bringing.


Parking is always 2 hours free in the parking deck, Taco Mac will give 1 more hour.

The one nice thing about this location being in a parking deck is that when the weather is nice we can go to the roof of the deck. It has a great view of downtown. When the weather is bad we can have the meet covered. You can take some really nice photo there too. Pretty good environment and scenary.

As always, all cars are welcomed :goodjob:


Directions Added: Double check before you go, I'm not responsible for given wrong direction, just lending a hand.

Here are couple direction I googled for the lazies :p


From South Side (Southlake Mall):
http://maps.google.com/maps?f=d&hl=en&geocode=&saddr=Southlake+mall,+Morrow,+GA&daddr=573+Main+Street,+30324&sll=37.0625,-95.677068&sspn=48.287373,82.265625&ie=UTF8&z=11


From North 85 (Gwinnett):
From Gwinnett:
Take I-85 South towards Atlanta
Exit Cheshire Bridge, turn right at end of exit ramp
At first light, turn left onto Buford Hwy
Take right fork onto Sidney Marcus Blvd
Go through a couple of lights
At a light with Chick-fil-A, turn left onto Piedmont Ave
Go a light (maybe 2) and you will see Chili's up ahead.
Turn right into shopping center before the Chili's
Take first left, pass in front of Taco Mac
Turn right into parking deck.

If you go past the Chili's, turn right at the light (Lindbergh)
Turn left behind Longhorns
Turn left into parking deck.


From North GA400 - North Point Mall:
http://maps.google.com/maps?f=d&hl=en&geocode=1468388741727110359,34.047844,-84.298360&saddr=1000+N+Point+Cir,+Alpharetta,+GA+30022+(Nort h+Point+Mall)&daddr=573+Main+Street,+30324&mra=pe&mrcr=0&sll=33.937094,-84.328308&sspn=0.398202,0.6427&ie=UTF8&ll=33.935385,-84.334488&spn=0.39821,0.6427&z=11


From North I75 (Marietta):
http://maps.google.com/maps?f=d&hl=en&geocode=&saddr=33.88937,-84.459286&daddr=573+Main+Street,+30324&mra=dme&mrcr=0&mrsp=0&sz=13&sll=33.85132,-84.41787&sspn=0.099651,0.160675&ie=UTF8&z=13

[DirtyMechanic]

damn you monkey beat me to it...

[dho42]

ARRRRRRRRRRRR GRRRRRRRRRRRRR BAAAAAM im there last time i was sick as a dog. does anyone have extra G parts they wanna sell. wait how much is this parking going to cost?

[TS240]

If only I had a real Z :(
Have fun guys, take lots of pics!

[dho42]

dude who cares come chill

[TS240]

Cool, I'll come by if Im free.

[ATK_Designs]

dho - parking is free as listed in the first post.

[dho42]

yeah i read of it again. my bad

[LeX]

hmmm i MIGHT make it. Close to my house but i'm going to be out of town for V day weekend rofl

[DirtyMechanic]

If only I had a real Z :(
Have fun guys, take lots of pics!any and all cars are welcome.

[ZeDFuNk]

i will be there as alwayssss :D

[DirtyMechanic]

i will be there as alwayssss :D you not invited. please leave this thrread...



jk you know im playing.

[JessAlba452]

LoL I might be there...will bring a camera :)

[ATK_Designs]

LoL I might be there...will bring a camera :)

I got the camera, just bring yourself :boobies: :D :camera:

[CHADbee]

see u b1tchs there!

[GuessWho]

Ill be there with my friends Z... so if you know of anybody that might wanna buy one bring them by with ya cause its up for sale...

[Jonflip29]

I'll be there like always. Everybody and anybody is welcome to come.

[mogaffar]

ill be there driving my 1991 300zx TT

[Superman350z]

I'll probably be there.

[DirtyMechanic]

I'll probably be there. your up in North ga right? i remember a mountain run you went on with colins and justine and i and few others.

[atlaccordz94]

hey guys, im kinda new... ill come and meet some new car guys.....

[nsany(atl)]

isn't that when the Daytona 500 is? Bar may be packed

[DirtyMechanic]

isn't that when the Daytona 500 is? Bar may be packed good call but i dont think bars will be that packed for a race. if anything the people that really want to see the race went down to see it in person. but we will manage. we have a room up stairs just for us.

[Dr.G35]

sounds fun im in :D finally i get to meet some of you guys

[DirtyMechanic]

sounds fun im in :D finally i get to meet some of you guysdont meet us stay away at least 500 feet... we are degenerates.... lol


if you could check us out... this is the main page we are located on.

http://www.g35frenzy.com/forum/showthread.php?t=10458

[Johnny Chimpo]

I should be there in the new whip.

[DirtyMechanic]

I should be there in the new whip. and whats the new whip.

[Johnny Chimpo]

and whats the new whip.

IS300

[dho42]

IS300

i used to have a IS miss the hell out of it.

[Johnny Chimpo]

Nice, I have 19's coming next week. I do miss my G a little.

[300zx]

I'm there in my 300ZX NA.

[dho42]

any G owner ever heard of dropzone springs? im rollin on 20'' and was wondering if anyone knew if that would work. 1.6 front and back about a 2'' drop

[Johnny Chimpo]

I ran Eibach fr 1.1 rear 1.0 with 20's

[DirtyMechanic]

I ran Eibach fr 1.1 rear 1.0 with 20's ugly car... cheap rims... lol jk

[DirtyMechanic]

any G owner ever heard of dropzone springs? im rollin on 20'' and was wondering if anyone knew if that would work. 1.6 front and back about a 2'' droptein S-Techs for the 350z.... see sig...

[dho42]

i already have stechs on the car i wanted to to be able to go the lowest with just springs and camber kit without rubbing my 20's. stechs dont do it for me but my back tires are 295's. i posted it here and now tech bc we all in this thread are Z or G owners so i thought maybe i can get some suggestions

[Johnny Chimpo]

ugly car... cheap rims... lol jk

I could throw some dirt on it to make ya feel better if you want. lol

[DirtyMechanic]

I could throw some dirt on it to make ya feel better if you want. lol yes please. but wait we might get confused which car is whos.

[Dr.G35]

dont meet us stay away at least 500 feet... we are degenerates.... lol


if you could check us out... this is the main page we are located on.

http://www.g35frenzy.com/forum/showthread.php?t=10458

ahhah prob nothing i havent done!!! yea i signed up there a long time ago and forgot my password and my user name and dont remember which email address i used so im still trying to remember that. im mostly on driver

[DirtyMechanic]

ahhah prob nothing i havent done!!! yea i signed up there a long time ago and forgot my password and my user name and dont remember which email address i used so im still trying to remember that. im mostly on drivereww driver. both driver and my350z have to much politics in it and women bashing... not my cup of tea

[VQ35 Star]

yea, im a member of my350z, and most of the members are ****s/asssssholes. you can't even make a thread w/o atleast 6 people talking mad trash. it's gotten pretty ridiculous. IA is SO much better, lol.

OH and I will "try" to be there.

[DirtyMechanic]

yea, im a member of my350z, and most of the members are ****s/asssssholes. you can't even make a thread w/o atleast 6 people talking mad trash. it's gotten pretty ridiculous. IA is SO much better, lol.

OH and I will "try" to be there.IA is better lol... IA isnt just G's and Z's not a far comparrison. g35frenzy is a million times better than driver or my350z

[dho42]

dirty mech are you a girl?

[DirtyMechanic]

dirty mech are you a girl? well i have been called a girl a few times for my hair but i usualy go be jesus or dirty hippie kurt coban and few other celeberties. you could also look up in my profile too quick one.

Location:
Alpharetta, Ga Occupation:
The VQ Builder. Gender:
Male

[///Mary]

I'lll plan on coming!!! Sounds like a good place!! I just hope i don't get lost as i usually do in atlanta!! See you guys there!!

[///Mary]

i already have stechs on the car i wanted to to be able to go the lowest with just springs and camber kit without rubbing my 20's. stechs dont do it for me but my back tires are 295's. i posted it here and now tech bc we all in this thread are Z or G owners so i thought maybe i can get some suggestions

i have stechs too!!

[ATK_Designs]

well i have been called a girl a few times for my hair but i usualy go be jesus or dirty hippie kurt coban and few other celeberties. you could also look up in my profile too quick one.

Location:
Alpharetta, Ga Occupation:
The VQ Builder. Gender:
Male

Don't let DM profile fool you, she's a hottie :idb:

[collins]

I'lll plan on coming!!! Sounds like a good place!! I just hope i don't get lost as i usually do in atlanta!! See you guys there!! for some reason, i was thinking your car was red..... did you used to have a red one?

[Nissan Sean]

i think i might actaully go this time. and yeah my350z is the gayness(this coming forma guy who got banned 3 times n 6months) lol. ia is great, even the little honda ricers add smething special to the mix. so where exactly is this tacomac?

[tony]

yea, im a member of my350z, and most of the members are ****s/asssssholes. you can't even make a thread w/o atleast 6 people talking mad trash. it's gotten pretty ridiculous. IA is SO much better, lol.

OH and I will "try" to be there.

It wasnt always like that until Z's got really common, it was a pretty useful site before but now I only go over there to buy parts.

[Nissan Sean]

i wish i could go there to buy parts, i canteven acess the site, they blocked my damn ip adress. a holes


oh and anyone from the kennesaw area headin to the meet, i wouldnt mind following somone down their?, i get lost easy:D

[GTMule]

hmmmmm, first I've heard of this. Will it be a bunch of 16 year olds talking about racing hondas on North Ave, or something pretty legit?

[ATK_Designs]

hmmmmm, first I've heard of this. Will it be a bunch of 16 year olds talking about racing hondas on North Ave, or something pretty legit?

lol....It's for mature people only. ;)

It's our G35 And 350z Monthly meets. However, we welcome any car makes and models as a lot of Ex-Nissan owners are now owning BMWs, Vettes, Porches, etc.

[DirtyMechanic]

Mary i got s-techs too. but im specail i have them for the 350z not G35couepe. i got a slightly higher spring rate. and it lowers a little more since its a G and not a Z

Kev= ****er

colins i dont believe she had a red one. must be mistaken wtih someone else

nissan sean banned is pretty hard in general i really dont know how people do it.

GTMule this isnt 16 year old punks with daddys money. please dont asume what you dont know. like atk said we have a lot of older people that moved on with BMW Pcars Vettes and whatnot. When we first were created Gs and Zs were usualy owned by children.





To all there is a roll out from North Point mall for a few people up 400 that dont really know where to go. i believe there is a roll out from pleasant hill area too. PM me and let me know if you want to come to the north point pre meet... ill call you when and where we are meeting up.

[Nissan Sean]

what exit is it off of 400? like exit 1?lol

[DirtyMechanic]

what exit is it off of 400? like exit 1?lol umm more like Google it and find out... the addy is in the first post...:goodjob:

[Nissan Sean]

your so helpful, can you give the web adress for that place you said, It was google right? :2up:

[ATK_Designs]

your so helpful, can you give the web adress for that place you said, It was google right? :2up:


The meeting place info is on my first post.

If you want to meet at North Point to caravan down, it's off exit 9 of GA400.

[Nissan Sean]

i think ill just use the annoying navigation off my phone,thanks

[dho42]

this is for kevin. slammed 3'' borrowing the pic. i know this isnt a picture thread but for information purpose to kev.

[ATK_Designs]

this is for kevin. slammed 3'' borrowing the pic. i know this isnt a picture thread but for information purpose to kev.

Yea, you can do that. :goodjob:

[DirtyMechanic]

your so helpful, can you give the web adress for that place you said, It was google right? :2up: i did say if anyone wants to meet up at north point to PM me and ill call you with when and where to meet.



are people just not reading thses days.

[///Mary]

Mary i got s-techs too. but im specail i have them for the 350z not G35couepe. i got a slightly higher spring rate. and it lowers a little more since its a G and not a Z

Kev= ****er

colins i dont believe she had a red one. must be mistaken wtih someone else

nissan sean banned is pretty hard in general i really dont know how people do it.



ooooo!! You ARE special!! hahah!!! :)


for some reason, i was thinking your car was red..... did you used to have a red one?

Nope! black! What do you have?!

[GirlieZ]

one of the z1 girls has a red gcoupe, stock i think.

ill be there if i can get my timing chain tensioners and guides in and installed by then. its sooo much fun taking apart the engine to just dump another grand more into it :mad:

[ATK_Designs]

one of the z1 girls has a red gcoupe, stock i think.

ill be there if i can get my timing chain tensioners and guides in and installed by then. its sooo much fun taking apart the engine to just dump another grand more into it :mad:

Hope you can be there. Must be nice to have good cash. I'm broke :(




Btw, Directions are added on the first post.

[GirlieZ]

well im lucky to have gotten my upgrades soo cheap (and still NEW) that i have some room. on a 03 with 80k on the odometer im pretty lucky everything that is being replaced is normal wear items. i was sad i had to cancel my tuning appointment at red star bc i couldnt get parts in time and i was in the ER all yesterday getting rehydrated from a bout with food poisoning :(

[ATK_Designs]

well im lucky to have gotten my upgrades soo cheap (and still NEW) that i have some room. on a 03 with 80k on the odometer im pretty lucky everything that is being replaced is normal wear items. i was sad i had to cancel my tuning appointment at red star bc i couldnt get parts in time and i was in the ER all yesterday getting rehydrated from a bout with food poisoning :(

ouch, are you okay now?

[GirlieZ]

yep on bed rest for the next day or two but im gonna escape in a hour or two to pay for my parts at capital nissan and visit my BABY! my tech didn't pull the motor out to do the install which is pretty pimp, he actually said it wasn't that big of a b!tch job as the shops make it out to be.

[DirtyMechanic]

yep on bed rest for the next day or two but im gonna escape in a hour or two to pay for my parts at capital nissan and visit my BABY! my tech didn't pull the motor out to do the install which is pretty pimp, he actually said it wasn't that big of a b!tch job as the shops make it out to be. correct i dont see why people insist that the motor has to come out on VQs to put cams in.

[GirlieZ]

correct i dont see why people insist that the motor has to come out on VQs to put cams in.
they did the same with headers. i guess sharif just makes excuses to charge for more labor hours :rolleyes:

[DirtyMechanic]

they did the same with headers. i guess sharif just makes excuses to charge for more labor hours :rolleyes: what did he quote you for what?

[GirlieZ]

1800 without doing the valve train. it seemed a little low for him. el oh el. z1 was 2300 at least with the valve train

[DirtyMechanic]

1800 without doing the valve train. it seemed a little low for him. el oh el. z1 was 2300 at least with the valve train when you say valve train you mean replacing the chains, guides and tensionors?

[GirlieZ]

when you say valve train you mean replacing the chains guides and tensionors?
doing that and the springs and shims. i actually just ordered my guides and tensioners today and then she will be done and i can get tuned :D hopefully ill break the 247whp mark :rolleyes:

[mocha latte cupcake]

whats going on in here?!?!?! something about valvetrain and low hp numbers?

[DirtyMechanic]

doing that and the springs and shims. i actually just ordered my guides and tensioners today and then she will be done and i can get tuned :D hopefully ill break the 247whp mark :rolleyes: whats with this 247whp thing? i know your making more.

[GirlieZ]

ohh i guess you didnt hear about my great evo/subie shop tune?!?

i should have told them if i wanted 247hp i would have flushed 500 dollars down the cr@pper and let sharif tune it!

[DirtyMechanic]

ohh i guess you didnt hear about my great evo/subie shop tune?!?

i should have told them if i wanted 247hp i would have flushed 500 dollars down the cr@pper and let sharif tune it! sharif is probably the best tuner on the east coast or Jeremy Tibbs in orlando. but ONLY for the VQ. and he can ONLY tune nothing more.

[mocha latte cupcake]

whoa whoa whoa angry voices in here! 247 is plenty.... if your looking to pick on your little sister in her B18C1 CRX bwhahahahahah I keed i keed... but yeah new tune + cams = :goodjob: and michael.... :ninja: i need your addy there are.... :ninja: things to be sent and someone should be sending me something as well :ninja: paypal and addy NOW!

[GirlieZ]

i havent seen any charts outa forged with the same mods put down numbers close to me. i know ATK has the same mods and he puts down ~25-30hp less, i mean granted he is an auto...

i think some shops in fl do a good job tuning n/a cars, but i have heard alot more bad stories about sharif lately then good.

[mocha latte cupcake]

dyno differences would be my guess...

[DirtyMechanic]

whoa whoa whoa angry voices in here! 247 is plenty.... if your looking to pick on your little sister in her B18C1 CRX bwhahahahahah I keed i keed... but yeah new tune + cams = :goodjob: and michael.... :ninja: i need your addy there are.... :ninja: things to be sent and someone should be sending me something as well :ninja: paypal and addy NOW! hey hey hey i said i lost 3 fingers 3 fingers = $300 and what are you sending me? and i dont have Paypal. im not internet savy

[DirtyMechanic]

i havent seen any charts outa forged with the same mods put down numbers close to me. i know ATK has the same mods and he puts down ~25-30hp less, i mean granted he is an auto...

i think some shops in fl do a good job tuning n/a cars, but i have heard alot more bad stories about sharif lately then good. because now he only has a 18yr old punk that doest know...much to say the least. and some other guy that i dont know anything about. but from a pic ive seen of the shop like a month ago he is pack beyond pack with work. he fired Chirs his best fabrocator ive ever seen blew up his built LS/vtec t-67 in his civic with 6lbs lol. and now devons WRX with a STI turbo and FMIC. devon left for more money. forged is a sad sad shop.


i havent heard any stories? linkys?

[DirtyMechanic]

sorry Kev but i have to say it again. Justine i made the same power ATK made fully tuned and n/a'd out when i was bone stock with 2 degrees timing.. lo 223 but that was on a DD you really cant compare dynos i really really hate when people do that. now if it was the same day on the same dyno then ill believe the HP difference

[GirlieZ]

jm atk dynoed at redstar i think maybe 240ish, he is welcome to come and correct me.

mike...this is why my Z car has more success at a vette shop then import shop, since the shop owner actually gives a damn about his reputation and his results. ahh well see about my new setup, not alota ppl have done it yet alone posted any info on it. all i know i JM is skeeting on ms. sushi right now. perv...


and my timing isnt adavnced that greatly, i think just a degree, we saw better results when it was left on stock timing last time around.

[DirtyMechanic]

jm atk dynoed at redstar i think maybe 240ish, he is welcome to come and correct me.

mike...this is why my Z car has more success at a vette shop then import shop, since the shop owner actually gives a damn about his reputation and his results. ahh well see about my new setup, not alota ppl have done it yet alone posted any info on it. all i know i JM is skeeting on ms. sushi right now. perv... no he cares about the reputation on My350z.com only not really anywhere else. and results he doesnt want to blow stuff up with a n/a tune lol:lmfao: and look bad on my350z.com heavan forbid him blow up a VQ motor but a wrx and a civic that his employees drive he doesnt care. i just home the few 2j's that came dont blow up. i would feel really sorry for them but not for someone that doesnt know how to tune a 2J or something else. lol cant wait to see this so call 700whp evo they have lol i wonder how many times he has popped it yet.

[DirtyMechanic]

and my timing isnt adavnced that greatly, i think just a degree, we saw better results when it was left on stock timing last time around. yeah i know the stock timing is very good but a little power is made with it but mostly from fuel.

what cams did you get? i know tomei but specs?

[GirlieZ]

ahh so he is still searching for his "clark killer"?

[mocha latte cupcake]

and get paypal cry baby it takes 2 seconds i don't wanna send your arse cash or a cashiers check geez. and something... something ninja like that is EXTRA RUSTY AND capable of giving you tetris... thats right i said tetris because no one likes that game!

[DirtyMechanic]

ahh so he is still searching for his "clark killer"? charles not clark.... evo.. supra...? confused? what spec tomei cams you get?

[GirlieZ]

264 and 10.2, ive heard between 10 to 25whp gain, at this point i just want my car back :( im mad at stupid nissan dealerships not keeping parts in stock! :2up:

[DirtyMechanic]

and get paypal cry baby it takes 2 seconds i don't wanna send your arse cash or a cashiers check geez. and something... something ninja like that is EXTRA RUSTY AND capable of giving you tetris... thats right i said tetris because no one likes that game! hey i have your super jesus polished SR injector caps still soo you know what you can do with your pie hole.... thats right eat some PIE!!!:lmfao: no really i have no need for paypal... umm when are you coming up here next s!ut?

[DirtyMechanic]

264 and 10.2, ive heard between 10 to 25whp gain, at this point i just want my car back :( im mad at stupid nissan dealerships not keeping parts in stock! :2up: that stuff someone in town should have had a set enougth to put a motor back together. 264 thats it? on both intake and exhaust? if so that will be on the lower side like 10-13whp

[GirlieZ]

its a DD, its a nice cam and it was OMG cheap but still new...i graudate in 6 months and have a few jobs lined up so ill be adding another lsX car to the collection after that :)

[DirtyMechanic]

its a DD, its a nice cam and it was OMG cheap but still new...i graudate in 6 months and have a few jobs lined up so ill be adding another lsX car to the collection after that :) how cheap and where? you should have went crazy and turn it into a track whore... JWT G.A. 297/289 FTW!!!

[GirlieZ]

i wish i could have done a whole build but that isnt in the budget... ill be happy with mid 280s or low 290s and a larger power band :)

[DirtyMechanic]

i wish i could have done a whole build but that isnt in the budget... ill be happy with mid 280s or low 290s and a larger power band :)i think higher 280's is probably what you'll see.

when i say track whore i mean something like this stripped caged 10.5 CR 272whp on DD. he is crazy fast at RA 1:42 hits the brakes at 125ft at 10A.
now Jose is a track whore.
http://i250.photobucket.com/albums/gg247/DirtyMechanic_album/100_2617.jpg
http://i250.photobucket.com/albums/gg247/DirtyMechanic_album/100_2618.jpg
http://i250.photobucket.com/albums/gg247/DirtyMechanic_album/100_2619.jpg

[dho42]

whats goin on here?

[DirtyMechanic]

whats goin on here? nothing that i see...

[JessAlba452]

Anyone think of doing a caravan down there? That would be cool.

[tony]

I'm sorry.. just have to be sure, are we talking 280 to the wheels on a VQ?

[dho42]

tony you rollin to the meet? man we need to play football soon

[DirtyMechanic]

I'm sorry.. just have to be sure, are we talking 280 to the wheels on a VQ? yes on a Dyno jet. not Dyno dynamics

[DirtyMechanic]

Anyone think of doing a caravan down there? That would be cool. where are you coming from? A few people and I are meeting up at North Point mall... and then blastin' down 400

[GirlieZ]

tony i've only used DJ, although a certain import shop claimed their's reads low, which i didn't believe and found out i had a jacked tuned and jacked AFR. i also heard sharif bumps his dynos 11% to compensate, but thats a my350 rumor

[tony]

Not 100% sure if I'm going.. On Sharif I really cannot say, I've heard Forged's dyno reads low (And I know for a fact Z1's tend to be kind of low as well) but 280whp is very impressive n/a.. really REALLY impressive.

[GirlieZ]

im not far off before i did my lastest round of mods so hopefully after this round gets tuned ill be deep into that...and the DEs seem to have less hp and more tq then the REVUP engines. but i do LOVE having a ton of tq (relatively)....

[mocha latte cupcake]

realitive to what.... my SR MOAR!!!!!! be afraid might lucy is coming to town!!!!!! tremble in fear mortals! well.... ok if you have a B16 tremble LIRL lol

[GirlieZ]

he ill be untuned till next week, so you can take a shot at sushi!

[mocha latte cupcake]

bwhahaha i'm not even sure if lucy will be running by next week LOL.... she needs a test pipe, tune and battery lol lol

[GirlieZ]

i kid i kid!

[DirtyMechanic]

GirlieZ sharif doesnt bump the numbers up he normally does it in shootout mode which you cant do anything like that. the DD does read low but why other read low i dont know.

JM im very dissappointed in you. Lucy is not back up to her old glory... after all the hard work and labor we did... geez what good are you. oh we need to play around to see how badly i rape you. like as in we need to do a daytime vid like....:goodjob:

[mocha latte cupcake]

bwhahaha i know right!??!? well she needed a tune... and OMG i HATE my battery UGH! i'm about to buy a frickin new optima cause this one is taking farkin forever! BUTTTTTTT i am looking at another car this weekend and if thats teh case she will stay down a bit longer til i can ummm.... get some more "mods" done :ninja:

[GirlieZ]

i m just repeating what i saw on the z boards about him admiting he bumped numbers, doesnt effect me, just his customers.....and jm drop tops ftw

[DirtyMechanic]

bwhahaha i know right!??!? well she needed a tune... and OMG i HATE my battery UGH! i'm about to buy a frickin new optima cause this one is taking farkin forever! BUTTTTTTT i am looking at another car this weekend and if thats teh case she will stay down a bit longer til i can ummm.... get some more "mods" done :ninja::D EVC ?:yay:

[mocha latte cupcake]

yes ma'am when you pop the top the panties drop..... :D

michael mcGpants - later on... just test pipe right about now... and then suspension and brakes :D

[DirtyMechanic]

this is just from what i heard from the rumor mill and the water cooler but JM drops tighty whiteys lol:lmfao: no panty or droptop dropping for JM lol....

[GirlieZ]

***covers eyes and ears***

[DirtyMechanic]

yes ma'am when you pop the top the panties drop..... :D

michael mcGpants - later on... just test pipe right about now... and then suspension and brakes :Dpshh brakes we dont need no stinkin brakes.... well for you wont be needing them your car dont run son... test pipe is easy and quick... ring ring ring hello mineike...click.

[DirtyMechanic]

***covers eyes and ears*** tis true its sad i know.

[mocha latte cupcake]

sigh HA......HA.......HA THATS RIGHT MAKE GAY JM JOKES...... SIGH whatever! idk you're a meanie poo face! you.... you... meanie!

[DirtyMechanic]

sigh HA......HA.......HA THATS RIGHT MAKE GAY JM JOKES...... SIGH whatever! idk you're a meanie poo face! you.... you... meanie! i never said anything about gay jokes just that you.... well ok they were sort of gay... im sorry forgive me... ill let you drink teh panty dropper if you come up....

[GirlieZ]

ahh JM admits to the gayness, good thing i know collins isnt on his left side :)

[DirtyMechanic]

ahh JM admits to the gayness, good thing i know collins isnt on his left side :)ahh haa Stacey was a guy!!! lol

[GirlieZ]

NOOOOOOOO!!! why!!!!!!!?????????!!!!!!!!!!!!

[DirtyMechanic]

Currently Active Users Viewing This Thread: 5 (5 members and 0 guests) Dirty Mech. (http://www.importatlanta.com/forums/member.php?u=12282), GirlieZ (http://www.importatlanta.com/forums/member.php?u=4431), manny8275 (http://www.importatlanta.com/forums/member.php?u=21030), jumpin800agl (http://www.importatlanta.com/forums/member.php?u=21415), PURE jdm (http://www.importatlanta.com/forums/member.php?u=3156)




come on JM do you forgive me. can we still be friends...? dont be

http://i250.photobucket.com/albums/gg247/DirtyMechanic_album/emokitten.jpg

[GirlieZ]

man, ninja dont have long enough hair on his head to be emo...but that big burly chest, now thats emo hairs at their best!

and i kid i kid JM collins beats you in that department tooo...man ninja you just cant win anything without the skyvia :tongue1:

[DirtyMechanic]

man, ninja dont have long enough hair on his head to be emo...but that big burly chest, now thats emo hairs at their best!

and i kid i kid JM collins beats you in that department tooo...man ninja you just cant win anything without the skyvia :tongue1:~~plugs ears with fingers~~ LALALALALALALALALALALALALALALALALALALALA

[ATK_Designs]

wow, you guys turned this thread upside down.

Back to OT....The meet is this Sunday. Anyone from SS wanna roll up there?

[DirtyMechanic]

wow, you guys turned this thread upside down.

Back to OT....The meet is this Sunday. Anyone from SS wanna roll up there?contact Jonny the flip for the SS roll up. i think chadbee and peeps are rolling it.

now back off topic

[DirtyMechanic]

Any one around the cummings/alpha/roswell/duluth area that wants to meet up before a few of us are meeting at the Normal North Point meet spot at 2:20ish and leaving no later than 2:45. PM me if your coming so we down leave you.

[Nissan Sean]

im coming tomorow, rain or shine. im prolly bringing my buddy(he loves the 350z) is that guy w/ the porsche coming. i would love to seee his porsche. i like to think of my Z, as an affordable porsche. :)

[300zx]

I'm there..Save me a spot.

[Nissan Sean]

i hope i dont get lost, lol.

[DirtyMechanic]

i hope i dont get lost, lol. where are you coming from/ its real easy to get there form 400.

[Nissan Sean]

comin from kennesaw, im gonna take 75 south to west paces ferry to east paces ferry, then turn right on peidmont then on main st. sound good? i dont drive in atl much

[DirtyMechanic]

comin from kennesaw, im gonna take 75 south to west paces ferry to east paces ferry, then turn right on peidmont then on main st. sound good? i dont drive in atl muchi guess. have you googled it

[DirtyMechanic]

better yet get off at west paces ferry rd then south on 41 then left at east wesley rd then that will T into peidmont rd


but thats what ill do. do what ever you feel comfortable.

[Nemesis]

I might see you guys there!

[DirtyMechanic]

I might see you guys there! you should get time to get some Pics of some dirty cars. i think the rain will hold off till we go inside and eat.

[Nemesis]

you should get time to get some Pics of some dirty cars. i think the rain will hold off till we go inside and eat.


Yeah Ill take some pics when everyone goes inside. Im actually headed to dinner with some folks later tonight so I wont be eatin.

[///Mary]

sorry i didn't make it everyone- i was too worried about the weather :(

[GirlieZ]

me too mary! my car is still down :( my mechanic thought it would be funny to text me and say a tornado hit norcross and they only found my hood. i almost teared up!

[Revmaynard]

Yeah Ill take some pics when everyone goes inside. Im actually headed to dinner with some folks later tonight so I wont be eatin.

I saw you chowin' down :ninja:

[Nemesis]

I saw you chowin' down :ninja:


you know man, we big people gotta eat :lmao:


I had a blast guys! You guys are great crew to hang around. Ill definitly try to make it out and be the troll loll

[DirtyMechanic]

me too mary! my car is still down :( my mechanic thought it would be funny to text me and say a tornado hit norcross and they only found my hood. i almost teared up!you stil chould have came. bring the goat. sh!t i think half the cars werent even Gs or Zs...

[DirtyMechanic]

you know man, we big people gotta eat :lmao:


I had a blast guys! You guys are great crew to hang around. Ill definitly try to make it out and be the troll loll get your pics up ****... lol jk... yeah we are fairly good bunch of people. Deff not your normal IA meet. then again this isnt really a IA meet anyways.

[Johnny Chimpo]

Had a great time eveyone. I cant wait for the pics.

[DirtyMechanic]

Had a great time eveyone. I cant wait for the pics. to bad the conyers and Z1 crew punked out... lol but i probably would have if i had the rain that was coming down on me when i left.

[DirtyMechanic]

Nemesis here is Chops' pics

http://www.g35frenzy.com/forum/showthread.php?t=10751

[ATK_Designs]

Great time guys. LOTS OF YOU PUNKED OUT (aka Conyers crew).

lol....we were covered in the parking deck, so no rain 'till we drove home.

Definitely look forward to next month. :)

[Revmaynard]

Yea, it was nice somewhat meeting whoever was there LOL.

Haha, my Blazer was definitely the troll of that buch, George.

[CHADbee]

Great time guys. LOTS OF YOU PUNKED OUT (aka Conyers crew).

lol....we were covered in the parking deck, so no rain 'till we drove home.

Definitely look forward to next month. :)
yeah yeah we suck. i was tired and sleepy. plus the weather was looking pretty nasty and started coming down pretty hard out this way. if it wasnt so far i woulda rode out anyways but....

*insert other lame @ss excuses here*

catch u guys at the next one for sure. i just wish we could have the meets downtown instead of all the way up 400 and sh1t...sundays are my only day off and i feel like being a lazy bum for atleast 1/2 the day!

[Nemesis]

NO excuses chaddy chad, I dont even own a Z or G and I made it!!!!! L








it only took me 5 minutes to get there though lol

[Revmaynard]

Yea, I definitely don't have a G or a Z, I have an S LOL.

But either way it was good company.

[Nemesis]

catch u guys at the next one for sure. i just wish we could have the meets downtown instead of all the way up 400 and sh1t...sundays are my only day off and i feel like being a lazy bum for atleast 1/2 the day!


Dude its only like 10 minutes from the V if you know where you're going. Its really not all up on 400.

[LeX]

i'll be there next time. Had family gathering this afternoon. Got a $100 amex gift card though so it's all gravy

[ATK_Designs]

yeah yeah we suck. i was tired and sleepy. plus the weather was looking pretty nasty and started coming down pretty hard out this way. if it wasnt so far i woulda rode out anyways but....

*insert other lame @ss excuses here*

catch u guys at the next one for sure. i just wish we could have the meets downtown instead of all the way up 400 and sh1t...sundays are my only day off and i feel like being a lazy bum for atleast 1/2 the day!

Dude, it's just around the corner of the V man (5 min).

This is the central location we've decided on for everyone. About 20-30 mins for everybody regardless where they come from (besides downtown ATL of course)

[Revmaynard]

Nice meeting you Kevin, I took some pictures but they were on my Dvd camcorder since my point and shot was dead. (they look like **** btw haha)

[Nissan Sean]

this was my first meet. i had a great time. kinda felt left out on the pics though......lol / ill def come to the next one. lookn for an exhaust for my z. thinkin invidia or rs*r. not really sure. everbody at the meet had really nice cars, you people spend way tooo damn much money, kinda hard to keep up. :)

[ATK_Designs]

Nice meeting everyone. I guess everyone know who I am now :)

[Nemesis]

Nice meeting everyone. I guess everyone know who I am now :)


Who are you?

[Nissan Sean]

hes the one w/ the red g. w/ the body kit. duh. :)

[Revmaynard]

Nice meeting everyone. I guess everyone know who I am now :)

Well when you said I'm Kevin/ATK_Designs I added it all up....? Haha.

[ZeDFuNk]

i would have come; i was in lawrenceville at about 1pm and it was raining too hard and "tornado warning's" so i didn't bother!

[chops]

Nice meeting you guys and gals, and thanks Nemesis for helping me out with the pictures.

here are some we took:


http://img183.imageshack.us/img183/451/image0001jn6.jpg
http://img166.imageshack.us/img166/9905/image0002xi0.jpg
http://img183.imageshack.us/img183/9264/image0003ur4.jpg
http://img183.imageshack.us/img183/9586/image0004yc4.jpg
http://img183.imageshack.us/img183/5582/image0005wt4.jpg
http://img514.imageshack.us/img514/8517/image0006dh5.jpg
http://img514.imageshack.us/img514/628/image0007rp1.jpg
http://img166.imageshack.us/img166/9814/image0008oj9.jpg
http://img166.imageshack.us/img166/5904/image0009ev4.jpg
http://img183.imageshack.us/img183/5177/image0010bt0.jpg
http://img514.imageshack.us/img514/8962/image0011eg6.jpg
http://img183.imageshack.us/img183/1199/image0012px6.jpg
http://img514.imageshack.us/img514/2496/image0013ax3.jpg
http://img514.imageshack.us/img514/1690/image0014zv5.jpg
http://img166.imageshack.us/img166/6646/image0015cb5.jpg
http://img183.imageshack.us/img183/8766/image0016dg9.jpg
http://img514.imageshack.us/img514/7600/image0017tn8.jpg
http://img514.imageshack.us/img514/1324/image0018in6.jpg
http://img166.imageshack.us/img166/1919/image0019xh0.jpg
http://img514.imageshack.us/img514/3007/image0020lr0.jpg

[Revmaynard]

Nice, those look so good compared to the ones I'm going to post up LOL.

[///Mary]

me too mary! my car is still down :( my mechanic thought it would be funny to text me and say a tornado hit norcross and they only found my hood. i almost teared up!

aww!! Well I'm glad i didn't "miss" you then!! Bc one of the reasons i wanted to go was to talk to my girl!!! haha!! Yea.. i heard tornado warning in atl so coming from athens worried me a little bit

[collins]

well damn, i should've rolled thru... i was actually right around the corner from there working at Paul's Restaurant. no no no, not admin paul... lol google paul's atlanta. but yeah, i got stuck out in the monsoon/flood and it sucked big time! HOWEVER! i did get to drive a brand spankin new off the showroom floor BMW 335i 6spd and a sl55 amg :D

[JessAlba452]

Didn't make it to this one. Looked like a really good showing too! :D Hope to make it to the next one ;)


Edit: Just noticed the white Lexus has the same wheels as me! :eek: Darn it now I gotta change em out ahaha

[Johnny Chimpo]

Edit: Just noticed the white Lexus has the same wheels as me! :eek: Darn it now I gotta change em out ahaha

Sorry, but they are a good looking wheel and I had to have them. Do you have them on your Maxima?

[JessAlba452]

^
Yep! :D They are a nice wheel. I like the polished lip on them.

What size are you running?

I think they would look sweet if painted gold or bronze!

Big pic of my car is linked.

http://img90.imageshack.us/img90/9872/calenderjpgzz6.jpg

The sky in the bg has been edited. Trying to submit it for a maxima calender :D

[Johnny Chimpo]

They 19x8 et40. I like the rough cast finish on them.

[JessAlba452]

Good size, running the same. You have a PM :)

[DirtyMechanic]

omg wheels whores^^^ where is Pure JDM? there is wheel talk going on in here.

[JessAlba452]

I've only gone through...

17" Original Factory
17" 350Z
18" 2k7 Maxima
19" Privat

Haha keeping the privats for show now instead of daily. Need to get the bent lip fixed sometime soon.

[Johnny Chimpo]

Ive had a few sets in my days.:ninja: