TopSpeed Time Attack - Winter Updates!

[TopSpeedInc]

This is the last couple pictures from the last time attack in West VA in 2007.
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_0433.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/brighton1.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_0062.jpg

Its been under the knife these last couple months.

Time for some winter off season updates...


Quick update: The set of Sparco Circuit's showed up today, and were too small. They were just uncomfortable for me to sit in. So I put them up for sale and sold them in under 3hrs, guess I priced them too low.

The good thing is I was very happy that I sold them, and it worked out the way it did. While I was at PRI in Orlando I got a chance to try out and sit in tons of different seats. I can honestly say after sitting in 30 different seats from 5 different manufactures that the RaceTech seats fit me the best.

So today I ordered a set of RT4009WHR. A bit pricey at $1100 each, but worth every penny.

If you ever get a chance I would highly recommend trying out each seat first before buying one. Seats are alot like clothes, in that two different seats both the same size will not fit the same. But when you do find that one that fits just right, the cost doesn't matter.


This is the new hotness
http://www.racetechseatsna.com/RT4009WTHR1.jpg


New wheels are on it.. and I have decided to switch suspensions yet again.

This time I am going with a full Competition Racing setup from JRZ. They are custom length struts designed for my car since it sits so much lower. They are also 3way adjustable, so I have my high and low speed adjustments seperate.

Wheels are 18"x10" +38offset enkie RPF1. The fronts I had to run a 5mm spacer to clear the brake calipers.

http://i14.photobucket.com/albums/a325/TRAYSTi/jrz.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_1925.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_1921.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_1920.jpg

[TopSpeedInc]

Finished the cage... just need to paint the interior black again.

http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_1940.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_1938.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_1937.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_1935.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_1934.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_1933.jpg

[santacruz77]

****s bad ass!! reps for grip driving. nice cage!

[Tracy]

Awesome dudes!!!! Are you guys ready to hang out lots next year? We will be time attacking, too in my STI that was supposed to stay a stock daily driver. Time to get beat up on by a girl! Yay, my favorite! It will be like old times. :D

[TopSpeedInc]

New pics of the manifold... I am not finished with it as you can see. I am contemplating trying to find some kind of clear cover or lexan maybe. To make the top plate of the intake manifold. I think the velocity stacks are just too pimp to cover up. Just not sure how it would hold up to heat and boost... humm well see.

Like I posted earlier the throttle body has been move to where the ac compressor used to be. I did this for a few reasons, but my main reason was so I could make really short intercooler piping.

Here are the pics..

http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2070.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2069.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2068.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2067.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2066.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2065.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2064.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2063.jpg

[TopSpeedInc]

Awesome dudes!!!! Are you guys ready to hang out lots next year? We will be time attacking, too in my STI that was supposed to stay a stock daily driver. Time to get beat up on by a girl! Yay, my favorite! It will be like old times. :D

Sounds good!

[On_Her_Face]

sweet jebus that mani is hot

[Tracy]

New pics of the manifold... I am not finished with it as you can see. I am contemplating trying to find some kind of clear cover or lexan maybe. To make the top plate of the intake manifold. I think the velocity stacks are just too pimp to cover up. Just not sure how it would hold up to heat and boost... humm well see.

Like I posted earlier the throttle body has been move to where the ac compressor used to be. I did this for a few reasons, but my main reason was so I could make really short intercooler piping.

Here are the pics..

http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2070.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2069.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2068.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2067.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2066.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2065.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2064.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/DSC_2063.jpg


shiny! o0o0o0o0o0o purty.

[WalkS]

sweet man!
good luck!

[TopSpeedInc]

Newest Addition to to the TopSpeed Family. 35ft Stacker & Toterhome!

http://i14.photobucket.com/albums/a325/TRAYSTi/toterfrt.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/toter1.jpg

[dorin48]

jeez baller lol :goodjob: very nice.

[greasemunkey]

drool...

[UpSideDownDesi]

yummy

[Vteckidd]

Thats a interesting looking intake manifold. Keep it see through!

[Maniac1]

That manifold looks insane!!

[Oz10]

hell yeah

[redgst97]

who built the cage? I am going to be needing one soon. In a different vehicle, but still a cage.

Car looks awesome!

[TopSpeedInc]

who built the cage? I am going to be needing one soon. In a different vehicle, but still a cage.

Car looks awesome!


TopSpeed did. Fabrication is done by Doug. We have mandrel bender in house.

[Elbow]

Hopefully I will be doing some time attack next year.

The Subaru looks AMAZING, nice cage, I LOVE this car!!!!

[TopSpeedInc]

Hopefully I will be doing some time attack next year.

The Subaru looks AMAZING, nice cage, I LOVE this car!!!!

Come on out!!! Here is the website of the schedule.
http://redlinetimeattack.com/index-5.html

We will be attending the majority of them.

[ugacivic]

awesome, nice work guys. best of luck at upcoming events.


how did you stack up against the white RHD suby next to you in that pic?

[SiRed94]

damn... that's what I'm talking about...

[TopSpeedInc]

awesome, nice work guys. best of luck at upcoming events.


how did you stack up against the white RHD suby next to you in that pic?


Its actually an evo II. They were in our class but they were several seconds behind us. That picture we were passing it soon after the pic.

[DUBSf22c]

WOW BALLLLLIN




Newest Addition to to the TopSpeed Family. 35ft Stacker & Toterhome!

http://i14.photobucket.com/albums/a325/TRAYSTi/toterfrt.jpg
http://i14.photobucket.com/albums/a325/TRAYSTi/toter1.jpg

[DinanM3atl]

JRZ and Racetech... very nice!

Why did you go with an HR version? Going to be required soon in your class/organization?

My next seat will be a 4009w

[dc2teg2006]

nice.... wish i had a car to compete like that!! love your car.

[ugacivic]

Its actually an evo II. They were in our class but they were several seconds behind us. That picture we were passing it soon after the pic.

whoops, shows what I know about evos, ha. love the new intake mani btw

[TopSpeedInc]

JRZ and Racetech... very nice!

Why did you go with an HR version? Going to be required soon in your class/organization?

My next seat will be a 4009w

We are a dealer for RaceTech so let us know if you need something. We may even have it in stock.

[NAIZBST]

very nice rebuild....goodluck on this upcoming season

[jaystar]

pretty sick

[DinanM3atl]

We are a dealer for RaceTech so let us know if you need something. We may even have it in stock.

What can you do on a 4009w and side mounts?