View Full Version : 92 hatch wire tuck
ryan34
01-22-2008, 12:38 PM
ok i jus started my wire tuck i was gonna go with jus tucking the headlight and fan etc wires. i have done that but i really wana do it all engine harness into the firewall, fuse block in the car, the whole nine. It would be so much easier if i had some guidelines frm someone who done thi b4. I seen many clean tucks on here specially hatches. Any info yall can give me ( where to hide the wires, firewall issues, dash?) or where can i get it done and how much jus an option wana do it but if its not to expensive i might consider. Thanks 4 reading cant wait 4 ur info!
d16_turbo
01-22-2008, 01:33 PM
http://i133.photobucket.com/albums/q52/japan4racing/100_1053.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1054.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1055.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1056.jpg
http://i133.photobucket.com/albums/q52/japan4racing/100_1065.jpg
bigdare23
01-22-2008, 01:35 PM
http://honda-tech.com/zerothread/1693934
B18c1Turboed
01-22-2008, 06:45 PM
I did it on My Ek but was too lazy too take pictures!
i did it on my coupe... but i dont think i have oh so many pictures of it lol.... and theres many ways to do a tuck, that includes doing one while remove alot of stuff like ac/blow motor, ect. and then theres a tuck while retaining all that stuff... one costs more than the other
aaronfelipe
01-22-2008, 09:24 PM
Keep us posted!
ryan34
01-22-2008, 10:33 PM
thanks guys helps out alot i will try to get some pics up, o and i dont have ac or ps
any of u guys wana come down and help!!!!!!!!lol, i wana take the dash out is that a pain in the ass or decent i jus dont wana brake something that makes it look like **** when i put it back in lmk
i can help, requires money for my skills though :tongue1::yes:
d16_turbo
01-23-2008, 04:00 PM
thanks guys helps out alot i will try to get some pics up, o and i dont have ac or ps
any of u guys wana come down and help!!!!!!!!lol, i wana take the dash out is that a pain in the ass or decent i jus dont wana brake something that makes it look like **** when i put it back in lmk
the dash isn't hard to take out, where are you located at
ryan34
01-25-2008, 06:37 AM
in carrollton,ga bout 45 mins down i-20 west.
thanks guys helps out alot i will try to get some pics up, o and i dont have ac or ps
any of u guys wana come down and help!!!!!!!!lol, i wana take the dash out is that a pain in the ass or decent i jus dont wana brake something that makes it look like **** when i put it back in lmk
drop your steering colum. - 4 14mm bolts
unbolt the dash - 1 on each end, 1 in the middle under the vent, 1 in the middle behind the center console. might be a couple more, i do not have the dash support as well as some others.
unplug some wires from the fusebox and PULL.
p.s. unplug the heatercore, and pull the line for the temp off the core.
ryan34
01-25-2008, 09:00 PM
thanks ima get to it this weekend u guys inspired me o go ahead and try the full tuck, brake and fuel line also.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.