Mr. Clean
01-21-2008, 05:55 PM
alrighty i finally took my doors off and got some with handles so now i am going to sell the shaved ones.
:EDIT:... will part out the popper kit: 30Lb. kit w/2 solenoids and remote and pre wired harness... super easy to install.
$225 doors+kit
$150 doors only
$100 popper kit only
no power mirrors, no panels. but everything else works... both windows work and speaker wire is hooked up... and i am leaving the wiring harness in it... there is a clip on the outside of the door that you just have to hook back up and you are done.
i have the entire popper kit with the remote and everything. the poppers are still hooked up in the door and work perfect. i dont know the name brand of the kit.
the passenger door is beautiful... no dings no dents no nothing.
i made a big booboo on the driver door though... i thought i could pop the plate off but they welded the crap out of it so it is in there. but i broke all the bondo off from around the plate and it cracked it a little under the handle... BUT with a good sanding that would come with a paint job anyway and re-bondo job and you would be good to go:
http://www.importatlanta.com/forums/attachment.php?attachmentid=130914&stc=1
alright well thats it... heres the doors:
:EDIT:... will part out the popper kit: 30Lb. kit w/2 solenoids and remote and pre wired harness... super easy to install.
$225 doors+kit
$150 doors only
$100 popper kit only
no power mirrors, no panels. but everything else works... both windows work and speaker wire is hooked up... and i am leaving the wiring harness in it... there is a clip on the outside of the door that you just have to hook back up and you are done.
i have the entire popper kit with the remote and everything. the poppers are still hooked up in the door and work perfect. i dont know the name brand of the kit.
the passenger door is beautiful... no dings no dents no nothing.
i made a big booboo on the driver door though... i thought i could pop the plate off but they welded the crap out of it so it is in there. but i broke all the bondo off from around the plate and it cracked it a little under the handle... BUT with a good sanding that would come with a paint job anyway and re-bondo job and you would be good to go:
http://www.importatlanta.com/forums/attachment.php?attachmentid=130914&stc=1
alright well thats it... heres the doors: