H22 Skunk2 Pro1 cams: characteristics?

[SE-Rious©]

I am interested in finding out the idling and driving characteristics of these cams in a more daily driven car.does it have a rough idle or more normal idle ? will the cams cause the engine to do the sputtering at light throttling ? thanks for any help.
:goodjob:

[all-mota]

if the cams are set up and degreed in properly they idle fine and don't have any issues but you need to get a good header and intake manifold etc for them to perform the best.

[SE-Rious©]

if the cams are set up and degreed in properly they idle fine and don't have any issues but you need to get a good header and intake manifold etc for them to perform the best.
so what cams do i need to watch out for that "cam" or have rough idling ?

[whatever210]

yes they do. you need the tuner series camshafts where youll have the stock idle lobes. the pro series is not your ordinary cam. is has a rough idle. but get tuner series only changes when your in vtec.

[all-mota]

yes they do. you need the tuner series camshafts where youll have the stock idle lobes. the pro series is not your ordinary cam. is has a rough idle. but get tuner series only changes when your in vtec.


that could never be less true if pro 3 cams idle like stock with itb's on my build pro 1's should idle fine. the only time i have seen when the cams don't idle like stock is when they weren't installed correctly.

[Vteckidd]

PRO1s idle like factory and are fine , we did an h22 that made 25whp with PRO1s over stock.

[scttydb411]

if you're just dropping them in w/o tuning then it's going to suck. like all-mota said, if they are installed, tuned, and have good intake and header you will enjoy them.