t0518g vs. gt28rs

[2.0 under pressure]

Which turbo is more capable, I would like tips from facts please. what's max whp on both of these turbos?

83 mm GSR fully built head etc.

[patrick4588]

borg warner s366 ftw mutha ****a

[Vteckidd]

We did a GT28RS on a b20VTEC Del SOl. 9psi it made 285whp with a FAT powerband, it hit full boost at 2000rpms.

Car was evil.

[patrick4588]

We did a GT28RS on a b20VTEC Del SOl. 9psi it made 285whp with a FAT powerband, it hit full boost at 2000rpms.

Car was evil.

sounds pretty badass. especially for a stock motor.

[-S Double C-]

We did a GT28RS on a b20VTEC Del SOl. 9psi it made 285whp with a FAT powerband, it hit full boost at 2000rpms.

Car was evil.

lol damn talk about tire roasting!...haha

[KidSaru]

GT28RS > lag

[Vteckidd]

Here is the B20 GT28 we did

http://batlground.com/gallery/albums/batlground_tuned/normal_Rodney%20copy.jpg

[bRiAnMcIvIcS]

We did a GT28RS on a b20VTEC Del SOl. 9psi it made 285whp with a FAT powerband, it hit full boost at 2000rpms.

Car was evil.

Thats badass!:goodjob:

[miro_gt]

so when you can't pick the rpm signal the dyno doesn't show the TQ curve ?

to the OP: the RS of course

[Vteckidd]

so when you can't pick the rpm signal the dyno doesn't show the TQ curve ?

to the OP: the RS of course
well the TQ will show but it will be a jagged graph with unrealistic tq numbers.

I can post the TQ, it just wont be realistic

[Dietcoke]

How can you get realistic hp with unrealistic TQ. -_-

[miro_gt]

How can you get realistic hp with unrealistic TQ. -_-

lol, reps :D

[Footefan52]

Because it is a honda it doesn't make realistic torque


jus playn

[Vteckidd]

How can you get realistic hp with unrealistic TQ. -_-
ok, the TQ will show 450 ft lbs, because it will be spiked.

Some cars the tach lead is real sensitive, if it picks up a bad signal it will spike and show a high TQ number.

You can strap a car down and do pulls with not electronics hooked up and it will calculate a HP number based on the rollers speed.

The TQ comes from the RPM or tach lead calculated with the roller speed (HP)

so bad tach lead, bad tq numbers.

[josh green]

You guys may want to invest in some new cables or something for the dyno. I dont think that I have seen a graph come out in rpm, showing TQ or w/out the curve being all fu(ked up.

[Vteckidd]

You guys may want to invest in some new cables or something for the dyno. I dont think that I have seen a graph come out in rpm, showing TQ or w/out the curve being all fu(ked up.
Thats not true at all, heres proof:

http://batlground.com/gallery/albums/batlground_tuned/normal_PhillipGreenH22%20copy.jpg
http://batlground.com/gallery/albums/batlground_tuned/normal_Shandy%20copy.jpg
http://batlground.com/gallery/albums/batlground_tuned/normal_julian%20copy.jpg
http://batlground.com/gallery/albums/batlground_tuned/normal_JasonSti%20copy.jpg
http://batlground.com/gallery/albums/batlground_tuned/normal_Baller%20copy%282%29.jpg
http://batlground.com/gallery/albums/batlground_tuned/normal_speedtech%20copy.jpg
http://batlground.com/gallery/albums/batlground_tuned/normal_DAN%20copy.jpg
http://batlground.com/gallery/albums/batlground_tuned/normal_gary.king.jpg
http://batlground.com/gallery/albums/batlground_tuned/normal_ShaneMassey%20copy.jpg

Some cars just have ignition problems or MSD sometimes makes thing hard to read. Ive been around enough dynos to know that some cars, just dont read right.

[patrick4588]

my msd dizzy has a tach output to make it easy :P

[japan4racing]

GT28RS > lag

lag is what the loser of the race users as an excuse. i have never had a problem with lag....and dont suspect i ever will

[2.0 under pressure]

lag is what the loser of the race users as an excuse. i have never had a problem with lag....and dont suspect i ever will


Why is that? Did you finally get your block back? I called them on it. If this is Mike? Pat's buddy from Macon/W.R.

[2.0 under pressure]

My tq.'s #'s were close to expected when Brandon dyno'd My Evo. C.O.P. FTW.

[95alty]

Personally car had a GT28rs... my altima to be exact... that damn thing boosted crazy... it screamed at 4k rpms

[RandomGuy]

the td05- 18g will support more power


but the gt28rs will spool a lot faster...

so its on you...

I personally would pick the 18G because its much cheaper and it still spools pretty quick (same turbine side as stock starion turbo) and supports on top end.

[bRiAnMcIvIcS]

GT2871R.:goodjob:
Horsepower 280 - 460
Displacement 1.8L - 3.0L