Brakes

[jdmmmm]

What is the best way to take the rotors of my integra without taking it to the shop?

[AnthonyF]

take ur rims off, undo the 2 bolts for the caliper, 2 bolts for the caliper bracket, then if ur rotors have never been taken off before, there will be 2 screws holding the rotor on. you have to undo those.

[jdmmmm]

what is the best way to undo the screws?

[AnthonyF]

there is a special impact screw driver that is supposed to be used for it. Your car might not even have them anymore. You can try a screw driver, if that doesnt work, put some balls behind it. if THAT doesnt work then you'll prob need that tool. Advance and Napa has rent-a-tools.

[khaxnguyen]

^^ yups. i lost my little screw driver impact thing. lol it's only 20 bucks. try not to use a philips alone..

[jdmmmm]

Thanks for the help

[AnthonyF]

~helpin u get out of red +8~

[EmminoDaGreat]

If you dont have an impact driver you can try using a chizzel and a hammer to brake loose the phillips head screws. Once they are loose they can come out easily with a screwdriver.

[blaknoize]

~helpin u get out of red +8~ I'll also help to pull u from the grave :D

[khaxnguyen]

i guess i'll chip in my one block lol