FS: T3/TO4E .... 0 MILES!!

[Doppelgänger]

Bought a turbo, decided im not going to need it.

Specs are Garrett T3 turbo with 46 TRIM TO4E 51MM INDUCER 75MM EXDUCER and .60 A/R compressor. Exhaust housing is .63 A/R and a high temperature coating. Turbo is internal wastegated. Comes with actuator and inlet ducting.

$400

http://i99.photobucket.com/albums/l281/teamFBG/1704_3.jpg
http://i99.photobucket.com/albums/l281/teamFBG/1d56_3.jpg

[Saung]

Nice....

[04Prerunner]

hahaha nice sig

[Doppelgänger]

$400

******EDIT********

Comes with oil feed line and oil filter sandwich plate for the oil feed. All brand new.


http://i99.photobucket.com/albums/l281/teamFBG/IMG_3999.jpg
http://i99.photobucket.com/albums/l281/teamFBG/IMG_3998.jpg

[B_Hoov]

is this as big/bitter than the gt30R im looking for? im looking to produce 450whp-520whp, will this support that ok? if so i'll swap my geo even for it if your interested?

[Doppelgänger]

you're kidding, right? You obviously have no idea about turbo sizing do you. The one i have listed should be good to ~350rwhp. Anything with hp abilities that high is going to be EXTREMELY laggy. The T3/4 i have listed is good for 1.8-2.2L motors with having only a bit of lag.

[Doppelgänger]

ttt

[Doppelgänger]

wow... kinda suprised by lack of interest on IA....

[B_Hoov]

didn't mena to sound ignorant, just with soo many sizes, different forms of measure, trims etc...i just didn't know, my 18g's wastegate is fully open at 2700rpm, im looking for a gt30R, dont care about lag...i actually expect it but it's the only way im going to pull big numbers like i want to, free bump.

[JayL]

wow... kinda suprised by lack of interest on IA....

i would love to pick this up from you, but i am not quite to that point in my build yet.. still working on the swap. sorry, but good luck on the sale!

bump for a good price!

[Doppelgänger]

didn't mena to sound ignorant, just with soo many sizes, different forms of measure, trims etc...i just didn't know, my 18g's wastegate is fully open at 2700rpm, im looking for a gt30R, dont care about lag...i actually expect it but it's the only way im going to pull big numbers like i want to, free bump.
FYI, there isn't just one "GT30R" there are several size "GT30R"'s out there.
I can not really suggest anything thats going to give "dyno queen" numbers, but i can sell a turbo thats going to have minimal lag and make more then enough power to get a lot cars moving with a quickness ;)

[turbosx©]

can I get the tee fitting?

[Doppelgänger]

sure... $400 and you get a free turbo and oil feed line kit.

[Doppelgänger]

SOLD