CH@Dbee's 350z v.taketwo

[changaroo]

what up IA

met up with chadizz today and shot his 350z since its modded now :)
(before pics here http://www.importatlanta.com/forums/showthread.php?t=144867)

have a few more pics, but theyre mostly from the same angle so these will do :P :idb:

ps: forgive me for the slight color inconsistencies :P laptop monitor = ghey. ill fix it once i get back to schoolio if you want.

http://www.changaroo.com/images/chadbee/IMG_8944.jpg
http://www.changaroo.com/images/chadbee/IMG_8948.jpg
http://www.changaroo.com/images/chadbee/IMG_8950.jpg
http://www.changaroo.com/images/chadbee/IMG_8953.jpg
http://www.changaroo.com/images/chadbee/IMG_8956.jpg
http://www.changaroo.com/images/chadbee/IMG_8961.jpg
http://www.changaroo.com/images/chadbee/IMG_8982.jpg
http://www.changaroo.com/images/chadbee/IMG_8979.jpg

:ninja:

[ZeDFuNk]

lookin good man!

[WalkS]

awesome pictures!

[Papa_Smurf]

looks pretty sick to me.

nice shots :goodjob:

[MachNU]

looking dam good!

[.:Stirfry:.]

nice shots::.. lookin good:goodjob:

[koffebean00]

Cool, it looks alot better now

[Halfwit]

jsut as good in person!

[Ruiner]

No FMIC, no care! ;)

[CHADbee]

thanks everybody! thank u so much chang!



No FMIC, no care! ;)
give me some $ and there will be a FMIC lol

[addandrew]

Looking good :goodjob::goodjob::goodjob:

[IndianStig]

what mods do you have done man? what are your plans?
looking good, saw it at santa run, but eric makes it look better, lol

[Maniac1]

Very nice, Chad.

[ironchef]

Looks good, whats done to it besides the wheels?

[CHADbee]

mods....

20% tint
painted the wheels
tanabe GF210's
20mm spacers
nissan versa antenna
JWT pop charger intake
TurboXS testpipes
Borla true dual exhaust
255whp and 247wtq

future plans are...shave the front emblem and a veilside lip, black housing headlights. i also am looking at the Z1 brake upgrade kit for the brembros and more go fast goodies including a plenum spacer, headers and a bottle

[Crazy Asian]

ITBS!!!!!!!!!!

[CHADbee]

ITBS!!!!!!!!!!
lol i wish im not that ballin! hell i could get a turbo kit from the company that sponsored the SRT4 but i cant even afford paying 1/2 price for boost. the car payment on this is alot higher that what it was on the neon.

i have plans for it and it isnt gonna be stock but i cant afford boost or itbs at this point in time...maybe one day.

[Relaxd]

Damn Chad your boy really knows how to make the Z look good, especially the rolling one.:yes:

[ZeDFuNk]

mods....

20% tint
painted the wheels
tanabe GF210's
20mm spacers
nissan versa antenna
JWT pop charger intake
TurboXS testpipes
Borla true dual exhaust
255whp and 247wtq

future plans are...shave the front emblem and a veilside lip, black housing headlights. i also am looking at the Z1 brake upgrade kit for the brembros and more go fast goodies including a plenum spacer, headers and a bottle

lol we'd have like a dead even race... should be interesting.. however i have a nismo lightweight clutch/flywheel combo and it grabs a bit harder :]... the stock Z clutch is like baby ****. doesnt shift very well! You do have the weight advantage.. smaller wheels.. no body mods :P we should race! it'll be interesting. i should have my car back by this week!


Make sure you get an Mrev2 to couple with that plenum spacer :]

[Kamikaze]

Very clean. :goodjob:

[CHADbee]

lol we'd have like a dead even race... should be interesting.. however i have a nismo lightweight clutch/flywheel combo and it grabs a bit harder :]... the stock Z clutch is like baby ****. doesnt shift very well! You do have the weight advantage.. smaller wheels.. no body mods :P we should race! it'll be interesting. i should have my car back by this week!


Make sure you get an Mrev2 to couple with that plenum spacer :]
if u ever want to hit a southside meet holler at me. ill put one of our clutchs in it summertime when i need it. my clutch has 21k on it and does a fine job so far for the lil mods i have. ill be getting a aam angled spacer from my boys over at z1 in the next month or so.

[CHADbee]

thanks for all the comments guys. reps were given

[RUFFIAN]

thats pretty cold right there!

[ZeDFuNk]

if u ever want to hit a southside meet holler at me. ill put one of our clutchs in it summertime when i need it. my clutch has 21k on it and does a fine job so far for the lil mods i have. ill be getting a aam angled spacer from my boys over at z1 in the next month or so.

Sounds good man :]

Motordyne is the best plenum fyi.. and motordyne mrev2 is a great couple for it :] try to get them both at once.. and some lightweight underdrive pullies help with weight and will actually put about 6whp down for you :]. pm me if you have any questions about some simple NA mods that make a big difference :D.

[CHADbee]

Sounds good man :]

Motordyne is the best plenum fyi.. and motordyne mrev2 is a great couple for it :] try to get them both at once.. and some lightweight underdrive pullies help with weight and will actually put about 6whp down for you :]. pm me if you have any questions about some simple NA mods that make a big difference :D.
unless u have a rev it up motor is piontless to buy the mrev2. from the reseach i have done(alot of it) for the non rev it up motors like mine an aam angled spacer or the 5/16 motordyne spacer only makes the best power gains.

[IndianStig]

whats a rev it up motor? the vq35hr?


nice mods chadbee. we should race after i get cams.....gimme 6 months though, however you'll prolly have bottle by then, lol.

[CHADbee]

whats a rev it up motor? the vq35hr?


nice mods chadbee. we should race after i get cams.....gimme 6 months though, however you'll prolly have bottle by then, lol.
yeah the rev it up is the HR motor

6 months? i better have some spray by then! :nx:

[JEY$JDM]

wow. awesome lookin 350z!

[GirlieZ]

lol we'd have like a dead even race... should be interesting.. however i have a nismo lightweight clutch/flywheel combo and it grabs a bit harder :]... the stock Z clutch is like baby ****. doesnt shift very well! You do have the weight advantage.. smaller wheels.. no body mods :P we should race! it'll be interesting. i should have my car back by this week!


Make sure you get an Mrev2 to couple with that plenum spacer :]

why the f#ck would he get an merv2 for a non revup? i know you read the z boards kris, the merv2 is only worth it on a revup, which it is designed for. chad the the 5/16 spacer is the best bang for the buck on a non revup, dyno proven through motordyne and indep.testing groups. i say do that and some throttle body work. and answer me about those cams man!

and btw the track is the heaviest z from my reading, at least in that model year.

[koffebean00]

Weaksauce!!

[Repost Squintz]

thats pretty cold right there!
the hell? im confused? thats supposed to be a compliment right?

looks good chad

[koffebean00]

Make it hit a lick!!!

[koffebean00]

Yea c'mon!

[bandydesign]

Awesome pix and nice Z yo!

Chang shootin some more hottness!

[GirlieZ]

juan that is enough from you!

[koffebean00]

juan that is enough from you!

Nevaaa!!! Arghhh!!!!:tongue1:

[CHADbee]

juan that is enough from you!
:stupid:

:lmao:

[CHADbee]

You must spread some Reputation around before giving it to koffebean00 again.

[addandrew]

Hows the ride with the tanabe GF210?
Any weird sounds from the TurboXS testpipes, like its leaking?

[CHADbee]

why the f#ck would he get an merv2 for a non revup? i know you read the z boards kris, the merv2 is only worth it on a revup, which it is designed for. chad the the 5/16 spacer is the best bang for the buck on a non revup, dyno proven through motordyne and indep.testing groups. i say do that and some throttle body work. and answer me about those cams man!

and btw the track is the heaviest z from my reading, at least in that model year.
i dont have leather, auto seats, seat heaters, nav and have forged rims...i doubt im the heaviest.

[CHADbee]

Hows the ride with the tanabe GF210?
Any weird sounds from the TurboXS testpipes, like its leaking?
love the springs...perfect drop and rides great. the test pipes are non resanated so they have a slight rasp around 3.5k but i can deal with it...some people cant.


:boobies: <----random bewbies

[koffebean00]

Damn I wanna tap that ass in "addandrew" 's avatar!!!

BOOTYLICIOUS!!!

I wanna show her who daddy is!!

[ZeDFuNk]

whats a rev it up motor? the vq35hr?


nice mods chadbee. we should race after i get cams.....gimme 6 months though, however you'll prolly have bottle by then, lol.


:no:

the rev-up motor is the 06 motor that failed miserably. the HR is an entire new series.

[Civic_H2b]

nice pictures

[ATK_Designs]

looking good there Chad. I'm jealous man. I'm red too but don't get those nice fotos like yours.

Btw, girlieZ. MREV2 does work for non-REVUP. It doesn't work as much, but it helps a lot as well.

[CHADbee]

looking good there Chad. I'm jealous man. I'm red too but don't get those nice fotos like yours.

Btw, girlieZ. MREV2 does work for non-REVUP. It doesn't work as much, but it helps a lot as well.
all u got to do is PM chang...he really doesnt charge too much. fair prices for his shoots.

[ZeDFuNk]

all u got to do is PM chang...he really doesnt charge too much. fair prices for his shoots.

:yes:


When used with on the non-REVUP 350Z engine, the gains when it is installed alone without a spacer are very similar to that of the 5/16" spacer. However, the MREV2 will show a slightly lower peak value, with a slightly higher average value and a slightly higher TQ value. Racers may want to get the spacer AND the MREV2, for improved top-end performance. Overall, MREV2 provides "area under the curve" and is the highest gain plenum mod available. Installs re-using existing factory hardware.


;)

[Z33_kid]

nice very nice

[quickdodge®]

and shot his 350z since its modded now :)

Modded? All I see different are wheels and tint. Nice looking car, though. Later, QD.

[ZeDFuNk]

Modded? All I see different are wheels and tint. Nice looking car, though. Later, QD.

Exhaust/intake/test pipes:] SLIGHTLY modded :p

[quickdodge®]

Exhaust/intake/test pipes:] SLIGHTLY modded :p

But you can't see that stuff. Later, QD.

[koolaidman]

i was gonna get the MREV2 but i didnt think it was worth the money unless i had a rev-up motor...the gains are minimal, you'd be better off spending your money on some UR pulleys.

but once again sweet pictures chad...saw them on my350z earlier (driftk1d)

[ZeDFuNk]

But you can't see that stuff. Later, QD.

WELL! on contrare! you can see the exhaust.. kind of.. and if he popped the hood you can see the intake! :D

[quickdodge®]

WELL! on contrare!

It's "au contraire." I'm French.


you can see the exhaust.. kind of.. and if he popped the hood you can see the intake! :D

You can see the exhaust, but it looks the same as the before. I'm just nitpicking the wording of the thread. Not flaming. The way it reads is like there are actual pictures of the mods done. That's all. Later, QD.

[ZeDFuNk]

It's "au contraire." I'm French.



You can see the exhaust, but it looks the same as the before. I'm just nitpicking the wording of the thread. Not flaming. The way it reads is like there are actual pictures of the mods done. That's all. Later, QD.


lmao fine. ass. :cry:

[quickdodge®]

No offense meant, Chadwick. Just bullshiiting here. Later, QD.

[ZeDFuNk]

No offense meant, Chadwick. Just bullshiiting here. Later, QD.


as per usual ;]

[SpoolBus]

Very clean very "mature" compared to the neon...yuppie!
Nice ride Chode ;]

[manilikecars]

i wish i had half your skills, nice car

[ATK_Designs]

:yes:


When used with on the non-REVUP 350Z engine, the gains when it is installed alone without a spacer are very similar to that of the 5/16" spacer. However, the MREV2 will show a slightly lower peak value, with a slightly higher average value and a slightly higher TQ value. Racers may want to get the spacer AND the MREV2, for improved top-end performance. Overall, MREV2 provides "area under the curve" and is the highest gain plenum mod available. Installs re-using existing factory hardware.


;)



yup, VERY RIGHT. My RPM dropped off sooner, so peak gain didn't improve, but the powerband improved greatly :)

[CHADbee]

i was gonna get the MREV2 but i didnt think it was worth the money unless i had a rev-up motor...the gains are minimal, you'd be better off spending your money on some UR pulleys.

but once again sweet pictures chad...saw them on my350z earlier (driftk1d)
im with this guy. the power gains from a mrev2 arent worth the $ from what i have seen



Very clean very "mature" compared to the neon...yuppie!
Nice ride Chode ;]
thank u matt.

[GirlieZ]

yup, VERY RIGHT. My RPM dropped off sooner, so peak gain didn't improve, but the powerband improved greatly :)
its like gaining 3 hp from a nismo intake, its hp but is it worth the money...no.
all the non revup cars you see running higher n/a i promise you will not have the merv2. i do not think the reup was failure. they have signifgantly higher hp gains per the same mods as the nonrevup, but no were the amount of tq as the nonrevup. as far as the hr, dont get me started...an hr with the same mods as chad put down 265 and 227 tq. Chad put down 255/247 with the same mods. ill take tq anyday.

[quickdodge®]

http://www.planetsave.com/files/2007/08/moose.jpg

Later, QD.

[CHADbee]

http://www.planetsave.com/files/2007/08/moose.jpg

Later, QD.
thanks qd :lmao:

[quickdodge®]

thanks qd :lmao:

Lolol. That wasn't for you. When we gonna meet man. You can't live on my side of town and not meet me. Lolol. Later, QD.

[CHADbee]

Lolol. That wasn't for you. When we gonna meet man. You can't live on my side of town and not meet me. Lolol. Later, QD.
start looking for my car on saturday nights at the starbucks...we are gonna try and get a eastside meet going soon....

[DUBSf22c]

good pics as always eric

[quickdodge®]

start looking for my car on saturday nights at the starbucks...we are gonna try and get a eastside meet going soon....

Alright, cool. Later, QD.

[GirlieZ]

http://www.350z-tech.com/zwiki/350Z_Curb_Weights

curb weights for z's...sorry chad i lied your track is the second heaviest hard top next to the touring, still not super heavy,..but the new tracks are 3400 lbs at least OUCHIE!

[iloveboost]

Very awesome pics!

I typically don't like 350Zs at all, but yours is clean, Chad. It needs a lip, but you posted you're already working on that.

Don't spray that car, get some twins or a big single for it.

I didn't realize those cars are so heavy!

[GirlieZ]

Very awesome pics!

I typically don't like 350Zs at all, but yours is clean, Chad. It needs a lip, but you posted you're already working on that.

Don't spray that car, get some twins or a big single for it.

I didn't realize those cars are so heavy!

turbo is a nice thought but the kit alone is 5-8k, on stock internals can only hold around 400-450whp, anything more and the engine is f!ck'd. can get in the same power range with a 100-125 shot

[CHADbee]

Very awesome pics!

I typically don't like 350Zs at all, but yours is clean, Chad. It needs a lip, but you posted you're already working on that.

Don't spray that car, get some twins or a big single for it.

I didn't realize those cars are so heavy!
yeah im working on a lip and shave the emblem but i got other things i want to take care of first. id love to go twins and maybe one day but at this point i dont have the funds to spend on a turbo kit so a 75 shot will do :goodjob:

from what ive seen....track editions Zs are coming in just what girlieZ said. but really the Z is not a small car...it is a 2 seater but it is kinda chubby lol

[iloveboost]

yeah im working on a lip and shave the emblem but i got other things i want to take care of first. id love to go twins and maybe one day but at this point i dont have the funds to spend on a turbo kit so a 75 shot will do :goodjob:

from what ive seen....track editions Zs are coming in just what girlieZ said. but really the Z is not a small car...it is a 2 seater but it is kinda chubby lol
Can't wait to see it on the road and running with the bottle. It's been a while. :D

[CHADbee]

Can't wait to see it on the road and running with the bottle. It's been a while. :D
i just dont come up "there" anymore...im out ya just got to find me :ninja:

[2000Quad]

chad...who's r6's are up at your pops place? and one day i am gonna go buy one of those super duty's....with that flex mound he's got out there they all look sweet....lovin this new car man....

[CHADbee]

chad...who's r6's are up at your pops place? and one day i am gonna go buy one of those super duty's....with that flex mound he's got out there they all look sweet....lovin this new car man....
lol who is this? i didnt know he had any bikes up there.

thank u

[jorge095]

very nice

[Nyteryder]

Your car is looking good man, props to you.

[CHADbee]

Your car is looking good man, props to you.
thanks J

[KevinT707]

BALLIN' !!

[MaconPerformance]

nice ride man....

[CHADbee]

BALLIN' !!



nice ride man....

thanks guys.

[rojodamonkey]

nice car +1 for you

[will]

lookin real nice. big fan of blacked out wheels

[CHADbee]

lookin real nice. big fan of blacked out wheels
thanks...is that ur DB in ur sig?

[will]

thanks...is that ur DB in ur sig?

yea. old picture. back to stock slammed on volk te-37's now.

no more bodykits or huge wheels. wanna keep it clean.

im over at my350z also. anyway nice lookin ride!

[ZeDFuNk]

what did you do with your Nismo V2 fb?? im looking to buy one :]

[CHADbee]

yea. old picture. back to stock slammed on volk te-37's now.

no more bodykits or huge wheels. wanna keep it clean.

im over at my350z also. anyway nice lookin ride!
im them same way. any new pics?

[GSRteg®]

I like the color

[will]

what did you do with your Nismo V2 fb?? im looking to buy one :]

wats up. i sold it locally. it was the shine replica. best replica out there. perfect fitment. nice Z!

[will]

im them same way. any new pics?

ill snap some pix today or tomorrow. prolly post a thread.

im in the gwinnett area. holla if ya see me. where ya located?

[Imadaman]

nice ride

[Tree]

love it

[CHADbee]

ill snap some pix today or tomorrow. prolly post a thread.

im in the gwinnett area. holla if ya see me. where ya located?
cool. im in conyers. i used to be in gwinnett all the time but thats when i had my big turbo SRT4. ill be at next months Z/G meet...been wanted to go to one but i was moving when i 1st got the car and this month i was at santarun100 but i really want to go to the next one to meet more Z/G peeps.

[ZeDFuNk]

wats up. i sold it locally. it was the shine replica. best replica out there. perfect fitment. nice Z!

yea i know.. i just dont want to wait for shipping! :| takes a freakin week and my cars in the shop now.. it will be out in less than a week :\ bleh, thanks anyways :]


p.s. im a premier member at my350z.com so i know about all the group buys and what not :D thanks for lookin out though :]


thanks for the compliment.. you're looked nice too :P dunno what it looks like now!

[Dirty Octopus™]

very nice :goodjob:

[GirlieZ]

cool. im in conyers. i used to be in gwinnett all the time but thats when i had my big turbo SRT4. ill be at next months Z/G meet...been wanted to go to one but i was moving when i 1st got the car and this month i was at santarun100 but i really want to go to the next one to meet more Z/G peeps.
dont feel bad about meeting up in december, the g/z meet didnt happen. we need to get you up in the mtns chad! Emily (phantomsilva) is gonna ride with me next time and snap pics

[Jason..]

we need to get the z's together for a photo shoot saturday chad,will and gurlie call me serioulsy

[CHADbee]

we need to get the z's together for a photo shoot saturday chad,will and gurlie call me serioulsy
caome to the Z/G meets im sure there will be photographers there. i just dont like having ****ty pics of my car lol

[GirlieZ]

caome to the Z/G meets im sure there will be photographers there. i just dont like having ****ty pics of my car lol
i have never seen a photog out at a z meet..

ill get collins to bring the slr, he isnt like changaroo but he is decent, def not ****ty

[collins]

lol there you go again, volunteering my services! shiiiiiiiii....

lol chad, the car's coming along nicely. are you gonna be out this weekend?

[Jonflip29]

Damn Chad, car looks hot in those pictures. Great shots Chang, I need to get with you one day this spring for a few shots.

[CHADbee]

Damn Chad, car looks hot in those pictures. Great shots Chang, I need to get with you one day this spring for a few shots.
thanks dude.

[magneto198]

good looker

[changaroo]

Damn Chad, car looks hot in those pictures. Great shots Chang, I need to get with you one day this spring for a few shots.

just hit me up whenever your ready bro :D

[Jonflip29]

just hit me up whenever your ready bro :D

Sounds good. I'm doing something with my wheels and front & rear bumpers soon, so after that its game.

[will]

im them same way. any new pics?

sup man. finally got some flix. heres da new look

http://i175.photobucket.com/albums/w135/iarenotstoopid/DSCN1844.jpg

http://i175.photobucket.com/albums/w135/iarenotstoopid/DSCN1845.jpg

[SicStang03]

NICE PICS

[GirlieZ]

sup man. finally got some flix. heres da new look

http://i175.photobucket.com/albums/w135/iarenotstoopid/DSCN1844.jpg

http://i175.photobucket.com/albums/w135/iarenotstoopid/DSCN1845.jpg


hehe he nice will...did you buy those from adam...he has a red z in dunwoody with the same set up and i know he is parting out...and chad i need your comp clutch help-i-ness on my new project! :)

[Jason..]

looks much better i like the cleaniss

[ueyedgr8tness]

sup man. finally got some flix. heres da new look

http://i175.photobucket.com/albums/w135/iarenotstoopid/DSCN1844.jpg

http://i175.photobucket.com/albums/w135/iarenotstoopid/DSCN1845.jpg


clean :goodjob:

[CHADbee]

sexy ass DB dude!

justine give me a call.

[homemadeS14s]

yo your Z is clean ass **** bro nice red with black wheel combo very nice

[CHADbee]

yo your Z is clean ass **** bro nice red with black wheel combo very nice
thank u!