View Full Version : Power Mods crower question
jadakid88
12-20-2007, 11:35 AM
Would crower 404 cams go well with boost on a built ls? i need to know before i purchase. and if it could it be daily driven?
thanks in advance
-Cortland
NAG2I
12-20-2007, 11:29 PM
i don't know for sure but they make turbo cams and then the 404s
i almost bought 404s for my all motor build but went another direction
i'm thinking the turbo cams crower makes would fit it better but might want another answer from a smarter person
helcat17
12-20-2007, 11:34 PM
i would say that they will work with a good tune and i mean with a REAL good tune if your going boost i would definitely go with the 440 turbo cams you might try and find a crower
distributer they would be able to give you a lot more info
B_Hoov
12-22-2007, 10:04 AM
i have something similar in mine from crower but a little more extreme and i drive mine daily on the break in tune.
all-mota
12-22-2007, 01:44 PM
Would crower 404 cams go well with boost on a built ls? i need to know before i purchase. and if it could it be daily driven?
thanks in advance
-Cortland
yes they work great you won't pick up much power but you should gain quite a bit of torque well worth the time and money if you ask me.
just ask yourself this most b series vtec guys run type r cams for turbo builds right? ok well the specs on the crower 404's are very close to what a factory type r cams vtec lobe is.
if you don't belive me dyno stock cams then change to these
jadakid88
12-22-2007, 04:28 PM
thanks man i should have deleted this i already got mny answer the forst day i posted this by mr. kidd. but appreciate the info anyway.
yes they work great you won't pick up much power but you should gain quite a bit of torque well worth the time and money if you ask me.
just ask yourself this most b series vtec guys run type r cams for turbo builds right? ok well the specs on the crower 404's are very close to what a factory type r cams vtec lobe is.
if you don't belive me dyno stock cams then change to these
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.