freindly help

[AnTi-PooN]

well i have a si tranny so i figured i'd swap it with my 4spd

but it's cold

anyone wanna help me(includes pizza/beer)

if yes lemme know when you can and i will work my schedule around that

but i would say a saturday morning or friday afternoon/night

[EvasiveEF9]

I've done that...it sucks. But it's DEFINITELY worth it...

[AnTi-PooN]

:(

[crhatchzc]

do you already have the si cv axles and the si spendles

[StraightSix]

do you already have the si cv axles and the si spendles

You don't them for the transmission swap. The inner splines are the same.

[crhatchzc]

are you sure because when spoon91 swapped out the dx to the si he had to change the spendles because the splines where diffrent

[AnTi-PooN]

same

[JDMJAYDC2]

i would come just for the free pizza but i dont know how to do the swap i love papa johns though spicy italian FTMFW

[AnTi-PooN]

you don't know how to put a tranny in?

[EvasiveEF9]

Yeah, he's not changing his axles...just the transmission. All EF transmissions from the D series use the same shaft-input from the axles. The part that DOES matter on the axles is out by the knuckle. You've got 23 and 26-spline. But again...if ALL he's changing is the tranny, he does NOT need to change the axles and/or knuckles.

[crhatchzc]

Yeah, he's not changing his axles...just the transmission. All EF transmissions from the D series use the same shaft-input from the axles. The part that DOES matter on the axles is out by the knuckle. You've got 23 and 26-spline. But again...if ALL he's changing is the tranny, he does NOT need to change the axles and/or knuckles.

oh ok

[StraightSix]

are you sure because when spoon91 swapped out the dx to the si he had to change the spendles because the splines where diffrent

Yup, I'm sure. I went from a STD 4 speed to a Si 5 speed and kept the 4 speed axles.