FS: XXXXwhp Motor, Axles, Kaaz Tranny, Injectors, JG, OMNIPOWER, 500whp+

[Vteckidd]

Let me start off by saying that nothing is this thread is CHEAP, nothing is EBAY, alot of it is CUSTOM and extremely expensive. ALl these parts are coming off my Brothers 4 door integra that was built over the last 5 years. HE SPARED NO EXPENSE.

He is getting out of the car scene, he has over $80,000 invested in his car. We will be parting out the ENTIRE SETUP so he can sell the car with a stock motor.

BUILT GSR HEAD PORTED BY DONF of DFE ENTERPRISES
GSR head fully ported, 5 angle valve job Crower springs and titanium retainers ferrera 1.0 mm ovesized valves
GSR cams
type r valve cover with half moon cut for camgears.

http://i26.photobucket.com/albums/c135/jinx93075/P1010012.jpg
http://i26.photobucket.com/albums/c135/jinx93075/P1010013.jpg
http://i26.photobucket.com/albums/c135/jinx93075/P1010015.jpg

Engine made 340whp TUNED BY ED@BALANCED PERFORMANCE. SETUP WAS NEVER PUSHED.


HEAD -$1300 OBO
BLOCK-SOLD!!!!

JG Victor X manifold Polished and nickel plated port matched with JG 68mm throttle body $850 was the total cost
http://i26.photobucket.com/albums/c135/jinx93075/P1010017.jpg
$600 OBO

GSR transmission with all new OEM internals and KAAZ LSD Perfect no grinds mint condition only 6K since rebuilt 1650 invested
http://i26.photobucket.com/albums/c135/jinx93075/P1010023.jpg
http://i26.photobucket.com/albums/c135/jinx93075/P1010024.jpg

$1400 OBO MAKE OFFERS, WONT FIND A NICER TRANS ANYWHERE

Driveshaftshop level 3.9 axles and hubs with added ABS ring. preinstalled in knuckles with new wheel bearings and spare hub $1400 new good for 600+ hp only 3K on them never drag raced

http://i26.photobucket.com/albums/c135/jinx93075/P1010026.jpg
$1000 OBO

CUSTOM TURBO KIT GOOD FOR 500whp
NO BULL SH IT EBAY KIT, THIS IS A QUALITY KIT
-Precision SC60.63 60-1 BB T31 TF Turbo good for 550 HP. 2500 degree temp coating exhaust housing and polished and black powder coated bell housing
-SFP manifold with 3" down pipe with HKS waste gate with all three springs and dumptube fabricated back into the down pipe with 3" flange and flex pipe all pieces 2500 degree black heat coating and copper manifold gasket
-APEXi Apex-i Skyline GTR intercooler core with end tanks.With custom brackets for mounting and for NX intercooler ring setup
-Intercooler piping polished and chromed with HKS racing bypass valve also polished and chromed. With all silcone connectors and elbows.
-RC 850cc INjectors

http://i26.photobucket.com/albums/c135/jinx93075/P1010029.jpg
http://i26.photobucket.com/albums/c135/jinx93075/P1010030.jpg
http://i26.photobucket.com/albums/c135/jinx93075/P1010031.jpg
http://i26.photobucket.com/albums/c135/jinx93075/P1010019.jpg
http://i26.photobucket.com/albums/c135/jinx93075/P1010043.jpg
http://i26.photobucket.com/albums/c135/jinx93075/P1010040.jpg
http://i26.photobucket.com/albums/c135/jinx93075/P1010039.jpg

$3500 OBO BOLT IT ON AN MAKE 450whp ALL DAY


NEED TO SELL, NO TRADES, MAKE OFFERS, DONT BE SHY

[2.0lturbo4]

BUMP

[six7teen]

very nice stuff! bump!

[Vteckidd]

up

[2.0lturbo4]

BUMP

[SixSquared]

DAMN good deal on the omnipower coilovers... they look like the ones with the beefier collars.. are they?

Bump for some nice stuff... Spoolin/Matt Stover might be the guy to talk to about finding a new home for it.

[GSRteg®]

Some good stuff in here GL

[MistaCee]

Nice parts

[Vteckidd]

up

[Vteckidd]

up

[cactusEG]

how much for the down pipe ? pm me

[Vteckidd]

not parting out turbo kit

[Vteckidd]

up

[Vteckidd]

up

[AMD_Civic]

sorrie to low ball but will you take 375 for the coilovers??

[Vteckidd]

No i will not, no offense taken.

BUt these are $650 EVERYWHERE

THey have less than 1000 miles

I will take $500, lowest i will go

[Infinite]

would that happen to be my old head?

[Vteckidd]

nope, its a DFE /DPR head

[Infinite]

i want the whole thing dammit
im buying another honda while i build the 2froty

[Vteckidd]

up

[Vteckidd]

no one wants $650 suspension for $500?

[tippatone]

Bump for some nice stuff, will those coilovers fit a DC teg?

[LSkid96]

bump nice stuff g/l on the sale

[weaponz]

goodies! someone needs to jump on them bump for u

[GAtegs]

Want a nice stock front end?

[Paul_s]

to clean

[tippatone]

If I get the suspension, how much will you charge to install??

[Vteckidd]

Batlground charges $80 per corner

[crxtreme2o3]

if you want to part the kit i need the injectors and turbo

[third412]

If u do decide to part it out< I need the wastegate, manifold and downpipe

[ryan34]

alright i will get the suspension and injectors cut me a deal, help a broke man out please pm me i dont get on here often so when i do i hardly browse thanks

[ryan34]

bump 4 ya

[Vteckidd]

bump!

[dilliorious03]

are you selling the suspension....pm me if you are

[-S Double C-]

Bump for sick ****! God i want that tranny! Is this Scott stuff off his old JDM front end DB?

[Vteckidd]

UP

[kkiepvvessau]

80,000 you make me laugh man!! what a joke . are you type an extra zero by mistake ?

[Vteckidd]

no, i didnt.

People dont build cars like this anymore.

Theres a story behind it, the motor was build 4 times because the first 3 people he used ripped him off.

I took it to DonF on the 4th time and the motor has been great.

He had $3000 in GAUGES from APEX

This car was built when there was no CHEAP **** around, its one of a kind.

ANyone that knows the car knows what im talking about

[HatchHero]

dam bro u must be ballin out of control

[blue_5g_zc]

80k invested into a honda.....wow

maybe a porshe would have been a more fulfilling route

[xdavidscenex]

you hsve the harness still is it obd2 pm mee thanks