In Need Of DA Axels....!

[1kreationz40]

wuddup fellas, im in need of da axels....for some reason the axels i got dont fil my hubs....so if any, lemme know wussups. so i could complete my swap....also i need a back bracket mount for a b16 into ef lemme know also..!

[uproot]

o'reilly's isnt too bad

[1kreationz40]

wats that suppose to mean

[Grimm Reeper]

Do you need the half-shaft as well?

[Papa_Smurf]

wats that suppose to mean

lol he's just saying o'rillies is a good place to buy parts from...

you can get axels from any auto parts store i believe bro :goodjob:

[uproot]

wats that suppose to mean

it means i bought mine from there and they didnt cost too much... but yeah, you can go to any auto parts store and they should have them or should be able to get them within a day

[EvasiveEF9]

The back bracket...is it the T bracket? I've got a couple...

[jfrolang]

probably talking about the rear mount bracket.

[EvasiveEF9]

Yeah...for the b18 it's a T-bracket...is it the same for the b16? I'm assuming so, but I'd lie ot make sure before making the offer to him. If that's the one, yeah, I've got like two or three...

[The BUCKY]

i have 2 extra halfshafts

[jfrolang]

Yeah...for the b18 it's a T-bracket...is it the same for the b16? I'm assuming so, but I'd lie ot make sure before making the offer to him. If that's the one, yeah, I've got like two or three...
All B-series swaps in an EF require a DA rear mount bracket. I guess it looks like a "T" but I've never heard it called that before.

[EvasiveEF9]

Well then, I've got a cheap T-bracket if he's interested...

[Sammich]

if you find out that 95 gsr axles can fit..i have the passenger side axle i will sell for cheap, brand new in box..just lemme know

[crhatchzc]

if you find out that 95 gsr axles can fit..i have the passenger side axle i will sell for cheap, brand new in box..just lemme know


yes he can us a 94 to 01 on the passenger side but it depends on what tranny he is runnin for the driver side

[Sammich]

well i have it...i'm ready to ship. shoot me a price via pm

[KevinT707]

Someone hook this dude up, that's my boy.

[EvasiveEF9]

Where's he even located?

[jfrolang]

yes he can us a 94 to 01 on the passenger side but it depends on what tranny he is runnin for the driver side
The tranny is not the determining factor for the driver's side axle, it's the intermediate shaft.

[EvasiveEF9]

The tranny is not the determining factor for the driver's side axle, it's the intermediate shaft.
Repped for ownershippage.

[1kreationz40]

thanks for all the respones, internet is kinda lagging here, soo imma answer everyone here, i need good used axels, no need for new ones...save money.....and i need the rear bracket piece that mounts onto the rear mount, the one i got ripped, so got no use for it, since its gonna bring me headache if i put it in. motor i got is a original obd0 motor, halfshaft is identical to DA's, so i need DA axels.....cable tranny of course....well then...lemme know.....well give a sohc zc tranny with third gear grind, in for the parts if not cash is what u want then cash is what you get...thanks q come again.

[1kreationz40]

Yeah...for the b18 it's a T-bracket...is it the same for the b16? I'm assuming so, but I'd lie ot make sure before making the offer to him. If that's the one, yeah, I've got like two or three...


how much u want for it....loc in kennysaw....the brackets are from DA motor correct..?

[EvasiveEF9]

..if it "ripped" it's not the t-bracket, but rather the mount itself... If it's hasport, they have a lifetime guarantee.

"used" axles are probably gonna be ****ty...do it right, do it once.

[EvasiveEF9]

how much u want for it....loc in kennysaw
Can you get a picture of what you need? Because I don't know that what I have is exactly what you're looking for...

[1kreationz40]

..if it "ripped" it's not the t-bracket, but rather the mount itself... If it's hasport, they have a lifetime guarantee.

"used" axles are probably gonna be ****ty...do it right, do it once.

its the t-bracket believe me, dunno how that old dude f dup that **** haha...its split right where it mounts onto the motor.

[crhatchzc]

The tranny is not the determining factor for the driver's side axle, it's the intermediate shaft.

your right your right you win + reps for you

[EvasiveEF9]

its the t-bracket believe me, dunno how that old dude f dup that **** haha...its split right where it mounts onto the motor.
Whoa whoa whoa...Bryan may be more seasoned than alot of us...but he's by no means a old dude...

Yeah, I've got a couple of those brackets. Throw me 15$. I work at Auto Technology Collision in Marietta JUST west of the Big Chicken

879 Roswell St.
Marietta, GA 30066

I work 9-5 M-F. Just stop into the shop. I'll put it in my car.

[1kreationz40]

Whoa whoa whoa...Bryan may be more seasoned than alot of us...but he's by no means a old dude...

Yeah, I've got a couple of those brackets. Throw me 15$. I work at Auto Technology Collision in Marietta JUST west of the Big Chicken

879 Roswell St.
Marietta, GA 30066

I work 9-5 M-F. Just stop into the shop. I'll put it in my car.


ummm friday sounds okay with u...?

[Grimm Reeper]

and I have that da half-shaft axle if you need, actually I'm tired of looking at that amongst other thing in my garage

[EvasiveEF9]

ummm friday sounds okay with u...?
That'll work. I'll be there, but friday at 5pm, I am GONE...LoL

and I have that da half-shaft axle if you need, actually I'm tired of looking at that amongst other thing in my garage
Why don't you send it with Jermaine? He's ALWAYS visiting me at the shop, LoL. I'll give it to him when he comes up friday and get the money to the Holiday Meet saturday...

[bigdare23]

I have a new DA driver side axle I can let go for cheap

[Sammich]

thanks for all the respones, internet is kinda lagging here, soo imma answer everyone here, i need good used axels, no need for new ones...save money.....and i need the rear bracket piece that mounts onto the rear mount, the one i got ripped, so got no use for it, since its gonna bring me headache if i put it in. motor i got is a original obd0 motor, halfshaft is identical to DA's, so i need DA axels.....cable tranny of course....well then...lemme know.....well give a sohc zc tranny with third gear grind, in for the parts if not cash is what u want then cash is what you get...thanks q come again.


save money with me and get a new axle, real talk homie. pm me and ill get u set up. its a 95 gsr axle brand new in box..it cost me $70 shipped...i dont plan on selling for the same thing

[1kreationz40]

save money with me and get a new axle, real talk homie. pm me and ill get u set up. its a 95 gsr axle brand new in box..it cost me $70 shipped...i dont plan on selling for the same thing


ummm sorry...im sticking with 90-93 DA Axels....im thinking i got 94 and up b series axels, the 94 up axels dont fit the halfshaft i got.

[EvasiveEF9]

how much are you offering for axles...?

[1kreationz40]

ill give u a sohc zc tranny with 3rd gear grind only at high rpm for the axels....one of the best trannys for d series...!

[EvasiveEF9]

I've already got a d-series tranny with 3rd gear grind, LoL.

[JDMJAYDC2]

i need a tranny:cry:

[EvasiveEF9]

I could trade my axles for his tranny, and you can pay me for the tranny, Jermaine...? That way everyone's happy.

[1kreationz40]

I've already got a d-series tranny with 3rd gear grind, LoL.

what kinda tranny u got....sohc zc gears i think are better...shorter gears, better pull....lol

[EvasiveEF9]

It's just a 4spd STD. But I'm getting rid of the car, so...