PDA

View Full Version : Project "OPPS I CRAPPED MY PANTS!!"



kain86
12-04-2007, 04:10 AM
ok guys i've been gone for some times now and heres an update.
for those of you who have met me you know i have a white 94 4dr with a jdm d15b non-vtec. well i still have that POS in there but it's about to get a major make over. a few months ago i bought a d15b vtec fron swolejamacan(miss spelled) that was pNp'D then bought caseys built y8 head :goodjob: that started the project. then bought a t3/t4 tubular mani from another IA member. i followed that by finding an IHI RHB52 for $40. then an intercooler from ruptaker. which i traded to 95droppedhatchm for the big-as* intercooler that i have now. i bought some pre-bent IC pipping from SRE engineering for $130. bought a s40 tranny off LsTurboHatch. i also bought a SK2 cam gear and ClutchMaster stage 3 clutch from another IA member. right now i'm pulling both of the heads a part and im going to mate swole's head with Casey's internals:ninja: which is made up of a SK2 cam, SK2 valve springs, SK2 TI retainers, and valves with a 2-angle on them. so pretty mucha complete SK2 head :goodjob: thats it for the motor so far....i thinks...... also just put SK2 lowering springs on with tokico blues in the back a some new sensa-trac gas rides in the front. it's a pretty smooth ride. im still looking for Eagle rods, Vitara or SRP pistons, VAFC2 or NEO, ACL bearings, and a custom DP. i'll have pics up later. also a type R lip so i can try to hide the bottom of the huge intercooler. lol. remember it's gonna be a sleeper.:ninja:

cactusEG
12-04-2007, 07:35 AM
I'm ready so see some pics... lol

GSRtegŪ
12-04-2007, 09:11 AM
I'm ready so see some pics... lol

x2

Grimm Reeper
12-04-2007, 09:46 AM
yea me treeeeeeeee :goodjob:

Mad Mike
12-04-2007, 02:07 PM
x4

GSRtegŪ
12-04-2007, 06:01 PM
We need :camera: dammit! :love:

dcshoeco
12-04-2007, 08:28 PM
Damn that nice..If pics arent up soon i'm gonna have to kick cactus in tha nuts..

kain86
12-05-2007, 02:38 AM
heres some pics;

D15b vtec valve cover with T3/T3 mani :yes:
http://i147.photobucket.com/albums/r317/kainkilleddavey/120507_02521.jpg

ports on d15b head :goodjob:
http://i147.photobucket.com/albums/r317/kainkilleddavey/120507_02481.jpg

D15b head w/ d15b cam will get pics of SK2 when i go to friends shop
http://i147.photobucket.com/albums/r317/kainkilleddavey/120507_02461.jpg

d15b/d16z6 mani port matched to head
http://i147.photobucket.com/albums/r317/kainkilleddavey/120507_02241.jpg

Turbo cold-side housing after paint :ninja: :yes: :goodjob:
http://i147.photobucket.com/albums/r317/kainkilleddavey/111207_19591.jpg

i'll have more pics when it's light out.

P.S. kick them anyways! :yes:

Grimm Reeper
12-05-2007, 10:37 AM
Single Cama Jama :goodjob: so you know that if you need any help with anything just to ask any of us on here and we'll do the best that we can to not only help a member, but a friend as well :goodjob:

cactusEG
12-05-2007, 12:14 PM
Single Cama Jama :goodjob: so you know that if you need any help with anything just to ask any of us on here and we'll do the best that we can to not only help a member, but a friend as well :goodjob:

Yup, im down t help in any way i can :yes:

dcshoeco
12-05-2007, 04:47 PM
I'm game as long as tony buys tha drinks lol..

kain86
12-05-2007, 07:22 PM
heres a pic of the intercooler on the car.
http://i147.photobucket.com/albums/r317/kainkilleddavey/120507_16442.jpg

i'll have more soon phone is just messing up.

kain86
12-05-2007, 07:25 PM
side shot. needs paint. it's gonna be a panda. Champ white with jet, skyhawk or Granada black with a type r lips or maybe a ferio lip
http://i147.photobucket.com/albums/r317/kainkilleddavey/120507_16441.jpg

cactusEG
12-05-2007, 09:20 PM
thats a sleeper.. u should check out halfwits 4dr thread....

kain86
12-06-2007, 03:35 AM
im gonna hide the intercooler with something. to make it look stock..... :ninja:
and i've already checked out casey's thread just waiting for more updates.
mine look's like crap...i just need to hit it with a hammer a few times then BAM! instant sleeper.... :lfmao:
J/K.... :ninja:

cactusEG
12-06-2007, 07:24 AM
im gonna hide the intercooler with something. to make it look stock..... :ninja:
and i've already checked out casey's thread just waiting for more updates.
mine look's like crap...i just need to hit it with a hammer a few times then BAM! instant sleeper.... :lfmao:
J/K.... :ninja:

are u gonna do any head work to it?

kain86
12-06-2007, 08:04 AM
heads already been port&polished by a guy from turbo dynamics in florida so said swole. plus it's getting all the SK2 stuff i have for it. not much more i can do with it. it just needs a bottom end so i can get it to 250-300whp. the motor only has 35k on it now so the bottom might hold together, but not gonna push it.

GSRtegŪ
12-06-2007, 02:07 PM
kkk

GSRtegŪ
12-06-2007, 02:31 PM
heads already been port&polished by a guy from turbo dynamics in florida so said swole. plus it's getting all the SK2 stuff i have for it. not much more i can do with it. it just needs a bottom end so i can get it to 250-300whp. the motor only has 35k on it now so the bottom might hold together, but not gonna push it.

Now remember Casey was pushing 280 at the wheels and the pushed it, but was fast as **** later on the engine blew SOHC FTW. :yes:

GSRtegŪ
12-06-2007, 03:08 PM
See you guys at the V going over to Tony's house to see what up with my boy holla.

puregroove
12-07-2007, 02:25 AM
ah, so that's the car...I'll keep an eye out for it next time. :yes:

cactusEG
12-07-2007, 07:38 AM
**** guys i heard another memeber of the squad was going boosted, a blk 2dr? He most be a fuking pimp ! ! !

GSRtegŪ
12-09-2007, 11:11 AM
**** guys i heard another memeber of the squad was going boosted, a blk 2dr? He most be a fuking pimp ! ! !

Ok Jose we all know its you... :ninja:

Mad Mike
12-09-2007, 09:45 PM
**** guys i heard another memeber of the squad was going boosted, a blk 2dr? He most be a fuking pimp ! ! !

I hate you:tongue1:

cactusEG
12-09-2007, 10:05 PM
I hate you:tongue1:
I wuv u guys

dcshoeco
12-10-2007, 03:30 PM
Cactus you dumb s hit..

GSRtegŪ
12-11-2007, 01:07 AM
Cactus you dumb s hit..

lol :lmfao: :lmfao: :lmfao: :lmfao:

cactusEG
12-11-2007, 07:54 AM
Fucck u guy's, im going home ....

kain86
12-15-2007, 01:16 AM
i think the build is going to be on hold for a little bit. about to quite my job they keep screwing me. and im F*CKING tired of it. and not to mention 8.50 and running a store that makes 25k in a week...GAY

cactusEG
12-15-2007, 10:40 AM
i think the build is going to be on hold for a little bit. about to quite my job they keep screwing me. and im F*CKING tired of it. and not to mention 8.50 and running a store that makes 25k in a week...GAY

Holy fucck u make about the same as me :tongue1: ... Damn dude i've love to see this car up and running boosted !

kain86
12-15-2007, 11:03 PM
same here. i think im just gonna deal with the crap for now. until i can find a good paying job.

cactusEG
12-15-2007, 11:06 PM
same here. i think im just gonna deal with the crap for now. until i can find a good paying job.

fuk that **** dont settle for any thing less. make them give u a raise ...

GSRtegŪ
12-15-2007, 11:08 PM
i think the build is going to be on hold for a little bit. about to quite my job they keep screwing me. and im F*CKING tired of it. and not to mention 8.50 and running a store that makes 25k in a week...GAY

Damn dude that sucks **** them to hell... and you run the store emagine that. :screwy:

kain86
12-18-2007, 07:08 AM
got me some VX's from b18cEG i'll have pics up when there painted. but still can't decide if i want to polish the lip.....that sh*t takes forever...there gonna be black. maybe a lip if you guys can talk me into it...

cactusEG
12-18-2007, 01:32 PM
got me some VX's from b18cEG i'll have pics up when there painted. but still can't decide if i want to polish the lip.....that sh*t takes forever...there gonna be black. maybe a lip if you guys can talk me into it...

i say go all white... :yes:

kain86
01-16-2008, 03:23 AM
Cars going to paint this weekend... in a few days a panda shall be born.... also talked to john at phareable.net and im getting him to make a chip for my set-up. also should be getting downpipe made. also rims should be getting sandblasted this week just need to find the time to do them...i'll get pics up as soon as she painted. or you could come to the dalton meet and see it in person:ninja:
MORE UPDATES SOON....

cactusEG
01-16-2008, 07:29 AM
^^ Damn big money lol sounds like u have all kinds of goodies...

GSRtegŪ
01-16-2008, 11:11 AM
Cars going to paint this weekend... in a few days a panda shall be born.... also talked to john at phareable.net and im getting him to make a chip for my set-up. also should be getting downpipe made. also rims should be getting sandblasted this week just need to find the time to do them...i'll get pics up as soon as she painted. or you could come to the dalton meet and see it in person:ninja:
MORE UPDATES SOON....

Ah, good for ya.

kain86
01-17-2008, 04:53 AM
CUSTOM 3" DP SHOULD BE GETTING FABBED FRIDAY ALSO BEFORE PAINT....HEHE:ninja::

GSRtegŪ
01-17-2008, 10:33 AM
CUSTOM 3" DP SHOULD BE GETTING FABBED FRIDAY ALSO BEFORE PAINT....HEHE:ninja::

I see someone has some money!

cactusEG
01-17-2008, 06:28 PM
How much have u spent on this project so far ?

kain86
01-18-2008, 01:26 PM
only about 4K and that includes buying the car and a new motor and tranny

GSRtegŪ
01-18-2008, 01:57 PM
only about 4K and that includes buying the car and a new motor and tranny

Someone is balling :goodjob:

kain86
01-22-2008, 03:03 AM
UPDATE:
1.) People doing DP are douchebags and i'm holding off on it until i can find somewhere that can make a 3" and not a damn 2" and let me keep my A/C.
2.) Car went to paint saturday should be getting my PAnDa back thursday.
3.) Starting to do work on my VX'S lip needs refinishing cause of curbage and then I sandblast them! decided to do polished lip with the rest high gloss black.
4.) Ordered a new headlamp assemble. Black housing with amber corners. hope they send the right ones....
TOo BE cOntiNUed......:ninja:

kain86
01-25-2008, 03:52 AM
got the car back from paint heres some phone quality pix.:goodjob:

Night
http://i147.photobucket.com/albums/r317/kainkilleddavey/012508_04221.jpg

At work
http://i147.photobucket.com/albums/r317/kainkilleddavey/012408_17191.jpg

Headlights should be here in a few days :goodjob:
also rims should be getting sandblasted and painted in the next few days also!
:dj:

cactusEG
01-25-2008, 07:15 AM
damn they did a great job, cant wait to see it. Now its time for some shoes...

kain86
03-02-2008, 04:33 AM
ok it's been about a month since my last update and heres what we have the head got toredown and rebuilt, checked all the clearances and tolerances, everyhting checked out good:goodjob: also got my shoes on her heres a few pics for you guys. hope you like!

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00480.jpg

my friends hrett putting the valve springs back in.

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00485.jpg

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00486.jpg

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00487.jpg

Head reassembled and ready to be mounted!

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00494.jpg

SK2 REPPIN'!

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00491.jpg

SHOES!

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00508.jpg

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00517.jpg

kain86
01-01-2009, 01:39 PM
ttt this thread needs some updates. i'll do it late...lol :ninja:

kain86
01-01-2009, 01:44 PM
oh yeah PIX!

http://i147.photobucket.com/albums/r317/kainkilleddavey/100608_16011.jpg

http://i147.photobucket.com/albums/r317/kainkilleddavey/121108_13581.jpg

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00535.jpg

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00538.jpg

http://i147.photobucket.com/albums/r317/kainkilleddavey/DSC00525.jpg

I Still need to Post up some motor Pix.... i will when i get back from the V

cactusEG
01-01-2009, 02:07 PM
Blast from the past thread...

kain86
01-01-2009, 02:09 PM
MIGHT AS WELL BRING IT BACK SINCE IM WORKING ON IT AGAIN... LOL :ninja:

GSRtegŪ
01-01-2009, 11:20 PM
MIGHT AS WELL BRING IT BACK SINCE IM WORKING ON IT AGAIN... LOL :ninja:

Truth

cactusEG
01-02-2009, 10:46 AM
MIGHT AS WELL BRING IT BACK SINCE IM WORKING ON IT AGAIN... LOL :ninja:
Should of brung it out last night...

jr4mny
01-03-2009, 09:03 AM
damn, thats nice.

Halfwit
01-04-2009, 08:07 PM
Blast from the past thread...
seriously!!

thats a great 4 dr! love the factory look, with power. nothing better.
saw my 4dr was mentioned in first page.. havnt had that car in almost a year!

cactus. i may pm you in a few days to show you the latest projects, and run some ideas by you. not jsut the "thing" in my sig.

cactusEG
01-05-2009, 10:38 AM
seriously!!

thats a great 4 dr! love the factory look, with power. nothing better.
saw my 4dr was mentioned in first page.. havnt had that car in almost a year!

cactus. i may pm you in a few days to show you the latest projects, and run some ideas by you. not jsut the "thing" in my sig.

I was wondering what ever happen to ur project homie. Thing was coming along nice. I remember u bought some slips for it last I saw it. I'll be waiting for the pm. u always got some nice projects up ur sleeve :goodjob: