Here I Hoe Again

[Grimm Reeper]

Well those of you who are in the squad or just hang with us know that a few weekends back I had a problem up in Gwinnett where my car died on me due to high rev's, no miss shifts, high revs only and untuned at that time but also a contributing factor that I had CTR pistons with Buddy CLub Spec III Pro's. I should of done more research about how far those cams push valves down and where does my pistons stop. I believed that I dropped 2 valves in #2 and with that being done it totally demolished my piston causing the scattered shards to wonder around in my other cylinders, but with out damaging me sleeves. Now Thanks to my boy Mark or blown_ss, I can get back on my feet to getting my baby up and running again. Mark sold me a JDM B16 head and now all I need are some pistons that are a .25 or with the bore of 81.25MM and I'll be good to go. I'm now about to post pics of the tragic end to my old and the wonderful beginning to my new.

Old:
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0192.jpg http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0191.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0189.jpg http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0188.jpg

New:
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-01881.jpg http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-01891.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0196.jpg http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0190.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-01921.jpg http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0193.jpg
http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0195.jpg http://i234.photobucket.com/albums/ee223/JDM_EK4/Photo-0194.jpg


And children please do not try this at home. :goodjob:

I'll try to keep everyone updated, but as of now I'm about to take the head and block to the machine shop.

[Grimm Reeper]

Cracked Block...........dammit all to hell

[Scotsman]

ouch , i sent some sympathy reps

[GSRteg®]

Well you know what they say the third time is a charm Tony.

[bigdare23]

damn tony!!!

[JDMJAYDC2]

oh well now me and the mad scientist gotta rip apart the block and the replace the piston rings you fried.. ooohhhhhhhh

[dcshoeco]

O well man you should have gotten a DSM like i told you lmao j/k..And gl on fixing it man..

[Grimm Reeper]

oh well now me and the mad scientist gotta rip apart the block and the replace the piston rings you fried.. ooohhhhhhhh

Edwin (Integra or JDMJAYDC2)

*Eclipse passes Integra*

Nooooooooooooooooooooooooooooooooooooooooooooooooo !!!!
Veronicaaaaaaaaaaaaaaaaaaaaaaa

[JDMJAYDC2]

hmmmmm anyone remember the civic flipping over hmmmmm

[Grimm Reeper]

hmmmmm anyone remember the civic flipping over hmmmmm

Yea, but I don't recall seeing anymore than 2 Integras through out the whole movie :lmfao:

[JDMJAYDC2]

thats cause they were 2 fast and 2 furious for the movie duhhh

[cactusEG]

FUCCK SHI-T SLU.T.. THAT LOOKS BAD. i GOT UR TEXT THIS MORNING..

[JDMJAYDC2]

who didnt get the text!!!

[Grimm Reeper]

People who I don't know :thinking: maybe

[JDMJAYDC2]

i feel so special now (tears up)

[cactusEG]

i feel so special now (tears up)

you should be, when ur in the presents of cactus lol jk......:ninja:

[GSRteg®]

thats cause they were 2 fast and 2 furious for the movie duhhh

lol

[DustnU]

Hey bro you need to keep it down down there. All that raquet in the garage is waking up my CHILD!! HaHaHa!!! Good luck on the rebuild Bro. Lemme kno if you need something. BTW you still got my 13's????

[Grimm Reeper]

Hey bro you need to keep it down down there. All that raquet in the garage is waking up my CHILD!! HaHaHa!!! Good luck on the rebuild Bro. Lemme kno if you need something. BTW you still got my 13's????


lol my bad D :lmfao: I didn't think you could hear me lol, but it is safe to say that the hard part is done.


I put the flywheel, clutch, and pressure plate on. Attached the tranny to the block have the motor mounted up in her. So I'll I'm waiting for now is the re-surfaced head from the machine shop so that I bring her back to life again and then I'll think of what else I want to do to her:yes:


I'll run your hatch foooo with my 2nd gear grind'n like a horny bitch at a frat party lol

[Grimm Reeper]

Yea lol I still have both of your 12 point 13MM down here sitting on my counter lol

[cactusEG]

did u put ur new stuff in yet ?

[GSRteg®]

Any new things done to it. :goodjob:

[dcshoeco]

Tony is it running now???Are we gonna throw it down man lol??? j/k

[Grimm Reeper]

hellz no I'm not running that motor :lmfao: it's needs to last me for a while, so I'm gonna be going the speed limit or a lil above it lol

[Grimm Reeper]

Jose I'm done with the engine man you can delete this thread. :goodjob:

[cactusEG]

Jose I'm done with the engine man you can delete this thread. :goodjob:

will do man...